I just did a fresh install of Linus's tree and i can install these
patches cleanly on top of the tree.
Thanks,
Ashish
On Mon, Mar 30, 2020 at 02:13:07PM -0500, Venu Busireddy wrote:
> On 2020-03-30 18:28:45 +0000, Ashish Kalra wrote:
> > This is applied on top of Linux 5.6, as per commit below :
> >
> > commit 7111951b8d4973bda27ff663f2cf18b663d15b48 (tag: v5.6, origin/master, origin/HEAD)
> > Author: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
> > Date: Sun Mar 29 15:25:41 2020 -0700
> >
> > Linux 5.6
> >
> > Makefile | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Not sure what I am missing here! This the current state of my sandbox:
>
> $ git remote -v
> origin git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git (fetch)
> origin git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git (push)
>
> $ git log --oneline
> 12acbbfef749 (HEAD -> master) KVM: SVM: Add KVM_SEV_SEND_FINISH command
> e5f21e48bfff KVM: SVM: Add KVM_SEND_UPDATE_DATA command
> 6b2bcf682d08 KVM: SVM: Add KVM_SEV SEND_START command
> 7111951b8d49 (tag: v5.6, origin/master, origin/HEAD) Linux 5.6
>
> $ git status
> On branch master
> Your branch is ahead of 'origin/master' by 3 commits.
>
> As can be seen, I started with the commit (7111951b8d49) you mentioned.
> I could apply 3 of the patches, but 04/14 is failing.
>
> Any suggestions?
>
> Thanks,
>
> Venu
>
> > Thanks,
> > Ashish
> >
> > On Mon, Mar 30, 2020 at 12:24:46PM -0500, Venu Busireddy wrote:
> > > On 2020-03-30 06:19:27 +0000, Ashish Kalra wrote:
> > > > From: Ashish Kalra <ashish.kalra@xxxxxxx>
> > > >
> > > > The series add support for AMD SEV guest live migration commands. To protect the
> > > > confidentiality of an SEV protected guest memory while in transit we need to
> > > > use the SEV commands defined in SEV API spec [1].
> > > >
> > > > SEV guest VMs have the concept of private and shared memory. Private memory
> > > > is encrypted with the guest-specific key, while shared memory may be encrypted
> > > > with hypervisor key. The commands provided by the SEV FW are meant to be used
> > > > for the private memory only. The patch series introduces a new hypercall.
> > > > The guest OS can use this hypercall to notify the page encryption status.
> > > > If the page is encrypted with guest specific-key then we use SEV command during
> > > > the migration. If page is not encrypted then fallback to default.
> > > >
> > > > The patch adds new ioctls KVM_{SET,GET}_PAGE_ENC_BITMAP. The ioctl can be used
> > > > by the qemu to get the page encrypted bitmap. Qemu can consult this bitmap
> > > > during the migration to know whether the page is encrypted.
> > > >
> > > > [1] https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdeveloper.amd.com%2Fwp-content%2Fresources%2F55766.PDF&data=02%7C01%7Cashish.kalra%40amd.com%7C2546be8861e3409b9d3408d7d4de683c%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637211924007781552&sdata=lYAGaXWFveawb7Fre8Qo7iGyKcLREiodSgQswMBirHc%3D&reserved=0
> > > >
> > > > Changes since v5:
> > > > - Fix build errors as
> > > > Reported-by: kbuild test robot <lkp@xxxxxxxxx>
> > >
> > > Which upstream tag should I use to apply this patch set? I tried the
> > > top of Linus's tree, and I get the following error when I apply this
> > > patch set.
> > >
> > > $ git am PATCH-v6-01-14-KVM-SVM-Add-KVM_SEV-SEND_START-command.mbox
> > > Applying: KVM: SVM: Add KVM_SEV SEND_START command
> > > Applying: KVM: SVM: Add KVM_SEND_UPDATE_DATA command
> > > Applying: KVM: SVM: Add KVM_SEV_SEND_FINISH command
> > > Applying: KVM: SVM: Add KVM_SEV_RECEIVE_FINISH command
> > > error: patch failed: Documentation/virt/kvm/amd-memory-encryption.rst:375
> > > error: Documentation/virt/kvm/amd-memory-encryption.rst: patch does not apply
> > > error: patch failed: arch/x86/kvm/svm.c:7632
> > > error: arch/x86/kvm/svm.c: patch does not apply
> > > Patch failed at 0004 KVM: SVM: Add KVM_SEV_RECEIVE_FINISH command
> > >
> > > Thanks,
> > >
> > > Venu
> > >
> > > >
> > > > Changes since v4:
> > > > - Host support has been added to extend KVM capabilities/feature bits to
> > > > include a new KVM_FEATURE_SEV_LIVE_MIGRATION, which the guest can
> > > > query for host-side support for SEV live migration and a new custom MSR
> > > > MSR_KVM_SEV_LIVE_MIG_EN is added for guest to enable the SEV live
> > > > migration feature.
> > > > - Ensure that _bss_decrypted section is marked as decrypted in the
> > > > page encryption bitmap.
> > > > - Fixing KVM_GET_PAGE_ENC_BITMAP ioctl to return the correct bitmap
> > > > as per the number of pages being requested by the user. Ensure that
> > > > we only copy bmap->num_pages bytes in the userspace buffer, if
> > > > bmap->num_pages is not byte aligned we read the trailing bits
> > > > from the userspace and copy those bits as is. This fixes guest
> > > > page(s) corruption issues observed after migration completion.
> > > > - Add kexec support for SEV Live Migration to reset the host's
> > > > page encryption bitmap related to kernel specific page encryption
> > > > status settings before we load a new kernel by kexec. We cannot
> > > > reset the complete page encryption bitmap here as we need to
> > > > retain the UEFI/OVMF firmware specific settings.
> > > >
> > > > Changes since v3:
> > > > - Rebasing to mainline and testing.
> > > > - Adding a new KVM_PAGE_ENC_BITMAP_RESET ioctl, which resets the
> > > > page encryption bitmap on a guest reboot event.
> > > > - Adding a more reliable sanity check for GPA range being passed to
> > > > the hypercall to ensure that guest MMIO ranges are also marked
> > > > in the page encryption bitmap.
> > > >
> > > > Changes since v2:
> > > > - reset the page encryption bitmap on vcpu reboot
> > > >
> > > > Changes since v1:
> > > > - Add support to share the page encryption between the source and target
> > > > machine.
> > > > - Fix review feedbacks from Tom Lendacky.
> > > > - Add check to limit the session blob length.
> > > > - Update KVM_GET_PAGE_ENC_BITMAP icotl to use the base_gfn instead of
> > > > the memory slot when querying the bitmap.
> > > >
> > > > Ashish Kalra (3):
> > > > KVM: x86: Introduce KVM_PAGE_ENC_BITMAP_RESET ioctl
> > > > KVM: x86: Introduce new KVM_FEATURE_SEV_LIVE_MIGRATION feature &
> > > > Custom MSR.
> > > > KVM: x86: Add kexec support for SEV Live Migration.
> > > >
> > > > Brijesh Singh (11):
> > > > KVM: SVM: Add KVM_SEV SEND_START command
> > > > KVM: SVM: Add KVM_SEND_UPDATE_DATA command
> > > > KVM: SVM: Add KVM_SEV_SEND_FINISH command
> > > > KVM: SVM: Add support for KVM_SEV_RECEIVE_START command
> > > > KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command
> > > > KVM: SVM: Add KVM_SEV_RECEIVE_FINISH command
> > > > KVM: x86: Add AMD SEV specific Hypercall3
> > > > KVM: X86: Introduce KVM_HC_PAGE_ENC_STATUS hypercall
> > > > KVM: x86: Introduce KVM_GET_PAGE_ENC_BITMAP ioctl
> > > > mm: x86: Invoke hypercall when page encryption status is changed
> > > > KVM: x86: Introduce KVM_SET_PAGE_ENC_BITMAP ioctl
> > > >
> > > > .../virt/kvm/amd-memory-encryption.rst | 120 +++
> > > > Documentation/virt/kvm/api.rst | 62 ++
> > > > Documentation/virt/kvm/cpuid.rst | 4 +
> > > > Documentation/virt/kvm/hypercalls.rst | 15 +
> > > > Documentation/virt/kvm/msr.rst | 10 +
> > > > arch/x86/include/asm/kvm_host.h | 10 +
> > > > arch/x86/include/asm/kvm_para.h | 12 +
> > > > arch/x86/include/asm/paravirt.h | 10 +
> > > > arch/x86/include/asm/paravirt_types.h | 2 +
> > > > arch/x86/include/uapi/asm/kvm_para.h | 5 +
> > > > arch/x86/kernel/kvm.c | 32 +
> > > > arch/x86/kernel/paravirt.c | 1 +
> > > > arch/x86/kvm/cpuid.c | 3 +-
> > > > arch/x86/kvm/svm.c | 699 +++++++++++++++++-
> > > > arch/x86/kvm/vmx/vmx.c | 1 +
> > > > arch/x86/kvm/x86.c | 43 ++
> > > > arch/x86/mm/mem_encrypt.c | 69 +-
> > > > arch/x86/mm/pat/set_memory.c | 7 +
> > > > include/linux/psp-sev.h | 8 +-
> > > > include/uapi/linux/kvm.h | 53 ++
> > > > include/uapi/linux/kvm_para.h | 1 +
> > > > 21 files changed, 1157 insertions(+), 10 deletions(-)
> > > >
> > > > --
> > > > 2.17.1
> > > >
