Re: [PATCH v3 3/9] KVM: VMX: Move hardware_setup() definition below vmx_x86_ops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Sean Christopherson <sean.j.christopherson@xxxxxxxxx> writes:

> Move VMX's hardware_setup() below its vmx_x86_ops definition so that a
> future patch can refactor hardware_setup() to modify vmx_x86_ops
> directly instead of indirectly modifying the ops via the global
> kvm_x86_ops.
>
> No functional change intended.
>
> Signed-off-by: Sean Christopherson <sean.j.christopherson@xxxxxxxxx>
> ---
>  arch/x86/kvm/vmx/vmx.c | 346 ++++++++++++++++++++---------------------
>  1 file changed, 173 insertions(+), 173 deletions(-)
>
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index ffcdcc86f5b7..82dab775d520 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -7652,179 +7652,6 @@ static bool vmx_apic_init_signal_blocked(struct kvm_vcpu *vcpu)
>  	return to_vmx(vcpu)->nested.vmxon;
>  }
>  
> -static __init int hardware_setup(void)
> -{
> -	unsigned long host_bndcfgs;
> -	struct desc_ptr dt;
> -	int r, i, ept_lpage_level;
> -
> -	store_idt(&dt);
> -	host_idt_base = dt.address;
> -
> -	for (i = 0; i < ARRAY_SIZE(vmx_msr_index); ++i)
> -		kvm_define_shared_msr(i, vmx_msr_index[i]);
> -
> -	if (setup_vmcs_config(&vmcs_config, &vmx_capability) < 0)
> -		return -EIO;
> -
> -	if (boot_cpu_has(X86_FEATURE_NX))
> -		kvm_enable_efer_bits(EFER_NX);
> -
> -	if (boot_cpu_has(X86_FEATURE_MPX)) {
> -		rdmsrl(MSR_IA32_BNDCFGS, host_bndcfgs);
> -		WARN_ONCE(host_bndcfgs, "KVM: BNDCFGS in host will be lost");
> -	}
> -
> -	if (!cpu_has_vmx_mpx())
> -		supported_xcr0 &= ~(XFEATURE_MASK_BNDREGS |
> -				    XFEATURE_MASK_BNDCSR);
> -
> -	if (!cpu_has_vmx_vpid() || !cpu_has_vmx_invvpid() ||
> -	    !(cpu_has_vmx_invvpid_single() || cpu_has_vmx_invvpid_global()))
> -		enable_vpid = 0;
> -
> -	if (!cpu_has_vmx_ept() ||
> -	    !cpu_has_vmx_ept_4levels() ||
> -	    !cpu_has_vmx_ept_mt_wb() ||
> -	    !cpu_has_vmx_invept_global())
> -		enable_ept = 0;
> -
> -	if (!cpu_has_vmx_ept_ad_bits() || !enable_ept)
> -		enable_ept_ad_bits = 0;
> -
> -	if (!cpu_has_vmx_unrestricted_guest() || !enable_ept)
> -		enable_unrestricted_guest = 0;
> -
> -	if (!cpu_has_vmx_flexpriority())
> -		flexpriority_enabled = 0;
> -
> -	if (!cpu_has_virtual_nmis())
> -		enable_vnmi = 0;
> -
> -	/*
> -	 * set_apic_access_page_addr() is used to reload apic access
> -	 * page upon invalidation.  No need to do anything if not
> -	 * using the APIC_ACCESS_ADDR VMCS field.
> -	 */
> -	if (!flexpriority_enabled)
> -		kvm_x86_ops->set_apic_access_page_addr = NULL;
> -
> -	if (!cpu_has_vmx_tpr_shadow())
> -		kvm_x86_ops->update_cr8_intercept = NULL;
> -
> -#if IS_ENABLED(CONFIG_HYPERV)
> -	if (ms_hyperv.nested_features & HV_X64_NESTED_GUEST_MAPPING_FLUSH
> -	    && enable_ept) {
> -		kvm_x86_ops->tlb_remote_flush = hv_remote_flush_tlb;
> -		kvm_x86_ops->tlb_remote_flush_with_range =
> -				hv_remote_flush_tlb_with_range;
> -	}
> -#endif
> -
> -	if (!cpu_has_vmx_ple()) {
> -		ple_gap = 0;
> -		ple_window = 0;
> -		ple_window_grow = 0;
> -		ple_window_max = 0;
> -		ple_window_shrink = 0;
> -	}
> -
> -	if (!cpu_has_vmx_apicv()) {
> -		enable_apicv = 0;
> -		kvm_x86_ops->sync_pir_to_irr = NULL;
> -	}
> -
> -	if (cpu_has_vmx_tsc_scaling()) {
> -		kvm_has_tsc_control = true;
> -		kvm_max_tsc_scaling_ratio = KVM_VMX_TSC_MULTIPLIER_MAX;
> -		kvm_tsc_scaling_ratio_frac_bits = 48;
> -	}
> -
> -	set_bit(0, vmx_vpid_bitmap); /* 0 is reserved for host */
> -
> -	if (enable_ept)
> -		vmx_enable_tdp();
> -
> -	if (!enable_ept)
> -		ept_lpage_level = 0;
> -	else if (cpu_has_vmx_ept_1g_page())
> -		ept_lpage_level = PT_PDPE_LEVEL;
> -	else if (cpu_has_vmx_ept_2m_page())
> -		ept_lpage_level = PT_DIRECTORY_LEVEL;
> -	else
> -		ept_lpage_level = PT_PAGE_TABLE_LEVEL;
> -	kvm_configure_mmu(enable_ept, ept_lpage_level);
> -
> -	/*
> -	 * Only enable PML when hardware supports PML feature, and both EPT
> -	 * and EPT A/D bit features are enabled -- PML depends on them to work.
> -	 */
> -	if (!enable_ept || !enable_ept_ad_bits || !cpu_has_vmx_pml())
> -		enable_pml = 0;
> -
> -	if (!enable_pml) {
> -		kvm_x86_ops->slot_enable_log_dirty = NULL;
> -		kvm_x86_ops->slot_disable_log_dirty = NULL;
> -		kvm_x86_ops->flush_log_dirty = NULL;
> -		kvm_x86_ops->enable_log_dirty_pt_masked = NULL;
> -	}
> -
> -	if (!cpu_has_vmx_preemption_timer())
> -		enable_preemption_timer = false;
> -
> -	if (enable_preemption_timer) {
> -		u64 use_timer_freq = 5000ULL * 1000 * 1000;
> -		u64 vmx_msr;
> -
> -		rdmsrl(MSR_IA32_VMX_MISC, vmx_msr);
> -		cpu_preemption_timer_multi =
> -			vmx_msr & VMX_MISC_PREEMPTION_TIMER_RATE_MASK;
> -
> -		if (tsc_khz)
> -			use_timer_freq = (u64)tsc_khz * 1000;
> -		use_timer_freq >>= cpu_preemption_timer_multi;
> -
> -		/*
> -		 * KVM "disables" the preemption timer by setting it to its max
> -		 * value.  Don't use the timer if it might cause spurious exits
> -		 * at a rate faster than 0.1 Hz (of uninterrupted guest time).
> -		 */
> -		if (use_timer_freq > 0xffffffffu / 10)
> -			enable_preemption_timer = false;
> -	}
> -
> -	if (!enable_preemption_timer) {
> -		kvm_x86_ops->set_hv_timer = NULL;
> -		kvm_x86_ops->cancel_hv_timer = NULL;
> -		kvm_x86_ops->request_immediate_exit = __kvm_request_immediate_exit;
> -	}
> -
> -	kvm_set_posted_intr_wakeup_handler(wakeup_handler);
> -
> -	kvm_mce_cap_supported |= MCG_LMCE_P;
> -
> -	if (pt_mode != PT_MODE_SYSTEM && pt_mode != PT_MODE_HOST_GUEST)
> -		return -EINVAL;
> -	if (!enable_ept || !cpu_has_vmx_intel_pt())
> -		pt_mode = PT_MODE_SYSTEM;
> -
> -	if (nested) {
> -		nested_vmx_setup_ctls_msrs(&vmcs_config.nested,
> -					   vmx_capability.ept);
> -
> -		r = nested_vmx_hardware_setup(kvm_vmx_exit_handlers);
> -		if (r)
> -			return r;
> -	}
> -
> -	vmx_set_cpu_caps();
> -
> -	r = alloc_kvm_area();
> -	if (r)
> -		nested_vmx_hardware_unsetup();
> -	return r;
> -}
> -
>  static __exit void hardware_unsetup(void)
>  {
>  	if (nested)
> @@ -7978,6 +7805,179 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = {
>  	.apic_init_signal_blocked = vmx_apic_init_signal_blocked,
>  };
>  
> +static __init int hardware_setup(void)
> +{
> +	unsigned long host_bndcfgs;
> +	struct desc_ptr dt;
> +	int r, i, ept_lpage_level;
> +
> +	store_idt(&dt);
> +	host_idt_base = dt.address;
> +
> +	for (i = 0; i < ARRAY_SIZE(vmx_msr_index); ++i)
> +		kvm_define_shared_msr(i, vmx_msr_index[i]);
> +
> +	if (setup_vmcs_config(&vmcs_config, &vmx_capability) < 0)
> +		return -EIO;
> +
> +	if (boot_cpu_has(X86_FEATURE_NX))
> +		kvm_enable_efer_bits(EFER_NX);
> +
> +	if (boot_cpu_has(X86_FEATURE_MPX)) {
> +		rdmsrl(MSR_IA32_BNDCFGS, host_bndcfgs);
> +		WARN_ONCE(host_bndcfgs, "KVM: BNDCFGS in host will be lost");
> +	}
> +
> +	if (!cpu_has_vmx_mpx())
> +		supported_xcr0 &= ~(XFEATURE_MASK_BNDREGS |
> +				    XFEATURE_MASK_BNDCSR);
> +
> +	if (!cpu_has_vmx_vpid() || !cpu_has_vmx_invvpid() ||
> +	    !(cpu_has_vmx_invvpid_single() || cpu_has_vmx_invvpid_global()))
> +		enable_vpid = 0;
> +
> +	if (!cpu_has_vmx_ept() ||
> +	    !cpu_has_vmx_ept_4levels() ||
> +	    !cpu_has_vmx_ept_mt_wb() ||
> +	    !cpu_has_vmx_invept_global())
> +		enable_ept = 0;
> +
> +	if (!cpu_has_vmx_ept_ad_bits() || !enable_ept)
> +		enable_ept_ad_bits = 0;
> +
> +	if (!cpu_has_vmx_unrestricted_guest() || !enable_ept)
> +		enable_unrestricted_guest = 0;
> +
> +	if (!cpu_has_vmx_flexpriority())
> +		flexpriority_enabled = 0;
> +
> +	if (!cpu_has_virtual_nmis())
> +		enable_vnmi = 0;
> +
> +	/*
> +	 * set_apic_access_page_addr() is used to reload apic access
> +	 * page upon invalidation.  No need to do anything if not
> +	 * using the APIC_ACCESS_ADDR VMCS field.
> +	 */
> +	if (!flexpriority_enabled)
> +		kvm_x86_ops->set_apic_access_page_addr = NULL;
> +
> +	if (!cpu_has_vmx_tpr_shadow())
> +		kvm_x86_ops->update_cr8_intercept = NULL;
> +
> +#if IS_ENABLED(CONFIG_HYPERV)
> +	if (ms_hyperv.nested_features & HV_X64_NESTED_GUEST_MAPPING_FLUSH
> +	    && enable_ept) {
> +		kvm_x86_ops->tlb_remote_flush = hv_remote_flush_tlb;
> +		kvm_x86_ops->tlb_remote_flush_with_range =
> +				hv_remote_flush_tlb_with_range;
> +	}
> +#endif
> +
> +	if (!cpu_has_vmx_ple()) {
> +		ple_gap = 0;
> +		ple_window = 0;
> +		ple_window_grow = 0;
> +		ple_window_max = 0;
> +		ple_window_shrink = 0;
> +	}
> +
> +	if (!cpu_has_vmx_apicv()) {
> +		enable_apicv = 0;
> +		kvm_x86_ops->sync_pir_to_irr = NULL;
> +	}
> +
> +	if (cpu_has_vmx_tsc_scaling()) {
> +		kvm_has_tsc_control = true;
> +		kvm_max_tsc_scaling_ratio = KVM_VMX_TSC_MULTIPLIER_MAX;
> +		kvm_tsc_scaling_ratio_frac_bits = 48;
> +	}
> +
> +	set_bit(0, vmx_vpid_bitmap); /* 0 is reserved for host */
> +
> +	if (enable_ept)
> +		vmx_enable_tdp();
> +
> +	if (!enable_ept)
> +		ept_lpage_level = 0;
> +	else if (cpu_has_vmx_ept_1g_page())
> +		ept_lpage_level = PT_PDPE_LEVEL;
> +	else if (cpu_has_vmx_ept_2m_page())
> +		ept_lpage_level = PT_DIRECTORY_LEVEL;
> +	else
> +		ept_lpage_level = PT_PAGE_TABLE_LEVEL;
> +	kvm_configure_mmu(enable_ept, ept_lpage_level);
> +
> +	/*
> +	 * Only enable PML when hardware supports PML feature, and both EPT
> +	 * and EPT A/D bit features are enabled -- PML depends on them to work.
> +	 */
> +	if (!enable_ept || !enable_ept_ad_bits || !cpu_has_vmx_pml())
> +		enable_pml = 0;
> +
> +	if (!enable_pml) {
> +		kvm_x86_ops->slot_enable_log_dirty = NULL;
> +		kvm_x86_ops->slot_disable_log_dirty = NULL;
> +		kvm_x86_ops->flush_log_dirty = NULL;
> +		kvm_x86_ops->enable_log_dirty_pt_masked = NULL;
> +	}
> +
> +	if (!cpu_has_vmx_preemption_timer())
> +		enable_preemption_timer = false;
> +
> +	if (enable_preemption_timer) {
> +		u64 use_timer_freq = 5000ULL * 1000 * 1000;
> +		u64 vmx_msr;
> +
> +		rdmsrl(MSR_IA32_VMX_MISC, vmx_msr);
> +		cpu_preemption_timer_multi =
> +			vmx_msr & VMX_MISC_PREEMPTION_TIMER_RATE_MASK;
> +
> +		if (tsc_khz)
> +			use_timer_freq = (u64)tsc_khz * 1000;
> +		use_timer_freq >>= cpu_preemption_timer_multi;
> +
> +		/*
> +		 * KVM "disables" the preemption timer by setting it to its max
> +		 * value.  Don't use the timer if it might cause spurious exits
> +		 * at a rate faster than 0.1 Hz (of uninterrupted guest time).
> +		 */
> +		if (use_timer_freq > 0xffffffffu / 10)
> +			enable_preemption_timer = false;
> +	}
> +
> +	if (!enable_preemption_timer) {
> +		kvm_x86_ops->set_hv_timer = NULL;
> +		kvm_x86_ops->cancel_hv_timer = NULL;
> +		kvm_x86_ops->request_immediate_exit = __kvm_request_immediate_exit;
> +	}
> +
> +	kvm_set_posted_intr_wakeup_handler(wakeup_handler);
> +
> +	kvm_mce_cap_supported |= MCG_LMCE_P;
> +
> +	if (pt_mode != PT_MODE_SYSTEM && pt_mode != PT_MODE_HOST_GUEST)
> +		return -EINVAL;
> +	if (!enable_ept || !cpu_has_vmx_intel_pt())
> +		pt_mode = PT_MODE_SYSTEM;
> +
> +	if (nested) {
> +		nested_vmx_setup_ctls_msrs(&vmcs_config.nested,
> +					   vmx_capability.ept);
> +
> +		r = nested_vmx_hardware_setup(kvm_vmx_exit_handlers);
> +		if (r)
> +			return r;
> +	}
> +
> +	vmx_set_cpu_caps();
> +
> +	r = alloc_kvm_area();
> +	if (r)
> +		nested_vmx_hardware_unsetup();
> +	return r;
> +}
> +
>  static struct kvm_x86_init_ops vmx_init_ops __initdata = {
>  	.cpu_has_kvm_support = cpu_has_kvm_support,
>  	.disabled_by_bios = vmx_disabled_by_bios,

Reviewed-by: Vitaly Kuznetsov <vkuznets@xxxxxxxxxx>

-- 
Vitaly




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux