This (now shorter) series expands the existing GICv4 support to deal
with the new GICv4.1 architecture, which comes with a set of major
improvements compared to v4.0:
- One architectural doorbell per vcpu, instead of one doorbell per VLPI
- Doorbell entirely managed by the HW, with an "at most once" delivery
guarantee per non-residency phase and only when requested by the
hypervisor
- A shared memory scheme between ITSs and redistributors, allowing for an
optimised residency sequence (the use of VMOVP becomes less frequent)
- Support for direct virtual SGI delivery (the injection path still involves
the hypervisor), at the cost of losing the active state on SGIs. It
shouldn't be a big deal, but some guest operating systems might notice
(Linux definitely won't care).
Some documentation is now available [0] in the IHI0069F documentation
from ARM (although still not final).
The series is roughly organised in 3 parts:
(0) Fixes
(1) v4.1 doorbell management
(2) Virtual SGI support
(3) Plumbing of virtual SGIs in KVM
Notes:
- The whole thing is tested on a FVP model, which can be obtained
free of charge on ARM's developer website. It requires you to
create an account, unfortunately...
- This series has uncovered a behaviour that looks like a HW bug on
the Cavium ThunderX (aka TX1) platform. The fix for this is now
in mainline (d01fd161e859).
- I'm extremely grateful for Zenghui Yu's huge effort in carefully
reviewing this rather difficult series (if we ever get to meet
face to face, drinks are definitely on me!).
- Thanks to Eric Auger for having joined the fun and spotted a
number of funky things!
- This is now left to brew in -next. Any issue will be fixed by
addtional patches.
* From v5 [5]
- Fixed VMOVP not being issued on systems that are not single-VMOVP
capable
- Propagated error on irq_get_irqchip_state() failure for vSGIs
- vSGI pending state is now get reported to userspace
- Restoring a GICD_TYPER2 value that doesn't match what KVM can offer
because nASSGIcap is different results in a failure
- Fixed locking on switch between SGI implementations
- Added more comments where required to clarify the behaviour of
some of the most nebulous parts
* From v4 [4]
- Rebased on v5.6-rc4
- Fixed locking all over the shop now that we can bypass the ITS
- Wait on INVALL at the RD level
- Plentu of cleanups/fixes thanks to Zenghui's careful review effort
* From v3 [3]:
- Rebased on v5.6-rc1
- Considerably smaller thanks to the initial patches being merged
- Small bug fix after the v5.6 merge window
* From v2 [2]:
- Another bunch of fixes thanks to Zenghui Yu's very careful review
- HW-accelerated SGIs are now optional thanks to new architected
discovery/selection bits exposed by KVM and used by the guest kernel
- Rebased on v5.5-rc2
* From v1 [1]:
- A bunch of minor reworks after Zenghui Yu's review
- A workaround for what looks like a new and unexpected TX1 bug
- A subtle reorder of the series so that some patches can go in early
[0] https://static.docs.arm.com/ihi0069/f/IHI0069F_gic_architecture_specification_v3_and_v4.1.pdf
[1] https://lore.kernel.org/lkml/20190923182606.32100-1-maz@xxxxxxxxxx/
[2] https://lore.kernel.org/lkml/20191027144234.8395-1-maz@xxxxxxxxxx/
[3] https://lore.kernel.org/r/20191224111055.11836-1-maz@xxxxxxxxxx/
[4] https://lore.kernel.org/r/20200214145736.18550-1-maz@xxxxxxxxxx/
[5] https://lore.kernel.org/r/20200304203330.4967-1-maz@xxxxxxxxxx/
Marc Zyngier (22):
irqchip/gic-v3: Use SGIs without active state if offered
irqchip/gic-v4.1: Skip absent CPUs while iterating over redistributors
irqchip/gic-v4.1: Ensure mutual exclusion between vPE affinity change
and RD access
irqchip/gic-v4.1: Ensure mutual exclusion betwen invalidations on the
same RD
irqchip/gic-v4.1: Advertise support v4.1 to KVM
irqchip/gic-v4.1: Map the ITS SGIR register page
irqchip/gic-v4.1: Plumb skeletal VSGI irqchip
irqchip/gic-v4.1: Add initial SGI configuration
irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks
irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks
irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks
irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction
layer
irqchip/gic-v4.1: Add VSGI allocation/teardown
irqchip/gic-v4.1: Add VSGI property setup
irqchip/gic-v4.1: Eagerly vmap vPEs
KVM: arm64: GICv4.1: Let doorbells be auto-enabled
KVM: arm64: GICv4.1: Add direct injection capability to SGI registers
KVM: arm64: GICv4.1: Allow SGIs to switch between HW and SW interrupts
KVM: arm64: GICv4.1: Plumb SGI implementation selection in the
distributor
KVM: arm64: GICv4.1: Reload VLPI configuration on distributor
enable/disable
KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
Zenghui Yu (1):
irqchip/gic-v4.1: Wait for completion of redistributor's INVALL
operation
arch/arm/include/asm/kvm_host.h | 1 +
arch/arm64/include/asm/kvm_emulate.h | 3 +-
arch/arm64/include/asm/kvm_host.h | 1 +
drivers/irqchip/irq-gic-v3-its.c | 422 +++++++++++++++++++++++--
drivers/irqchip/irq-gic-v3.c | 13 +-
drivers/irqchip/irq-gic-v4.c | 134 +++++++-
include/kvm/arm_vgic.h | 4 +
include/linux/irqchip/arm-gic-common.h | 2 +
include/linux/irqchip/arm-gic-v3.h | 20 +-
include/linux/irqchip/arm-gic-v4.h | 25 +-
virt/kvm/arm/arm.c | 8 +
virt/kvm/arm/vgic/vgic-debug.c | 14 +-
virt/kvm/arm/vgic/vgic-mmio-v3.c | 81 ++++-
virt/kvm/arm/vgic/vgic-mmio.c | 88 +++++-
virt/kvm/arm/vgic/vgic-v3.c | 6 +-
virt/kvm/arm/vgic/vgic-v4.c | 141 +++++++--
virt/kvm/arm/vgic/vgic.h | 1 +
17 files changed, 895 insertions(+), 69 deletions(-)
--
2.20.1
