[KVM-AUTOTEST PATCH v2 11/11] KVM test: make stress_boot work properly with TAP networking

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Take an additional parameter 'clone_address_index_base' which indicates the
initial value for 'address_index' for the cloned VMs.  This value is
incremented after each clone is created.  I assume the original VM has a single
NIC; otherwise NICs will end up sharing MAC addresses, which is bad.

Also, make a few small corrections:

- Take the params for the clones from the original VM's params, not from the
test's params, because the test's params contain information about several
VMs, only one of which is the original VM. The original VM's params, on the
other hand, describe just a single VM (which we want to clone).

- Change the way kill_vm.* parameters are sent to the postprocessor.
(The postprocessor doesn't read params from the VM objects but rather from the
test's params dict.)

- Replace 'if get_command_status(...)' with 'if get_command_status(...) != 0'.

- Replace the test command 'ps aux' with 'uname -a'.  The silly reason for this
is that DSL-4.2.5 doesn't like 'ps aux'.  Since 'uname -a' is just as good
(AFAIK), use it instead.

Signed-off-by: Michael Goldish <mgoldish@xxxxxxxxxx>
---
 client/tests/kvm/kvm_tests.cfg.sample |    7 ++++++-
 client/tests/kvm/kvm_tests.py         |   14 ++++++--------
 2 files changed, 12 insertions(+), 9 deletions(-)

diff --git a/client/tests/kvm/kvm_tests.cfg.sample b/client/tests/kvm/kvm_tests.cfg.sample
index 255716a..a8ba6b3 100644
--- a/client/tests/kvm/kvm_tests.cfg.sample
+++ b/client/tests/kvm/kvm_tests.cfg.sample
@@ -117,7 +117,12 @@ variants:
     - stress_boot:  install setup
         type = stress_boot
         max_vms = 5    
-        alive_test_cmd = ps aux
+        alive_test_cmd = uname -a
+        clone_address_index_base = 10
+        kill_vm = yes
+        kill_vm_vm1 = no
+        kill_vm_gracefully = no
+        extra_params += " -snapshot"
 
     - shutdown:     install setup
         type = shutdown
diff --git a/client/tests/kvm/kvm_tests.py b/client/tests/kvm/kvm_tests.py
index 4bc8718..d146929 100644
--- a/client/tests/kvm/kvm_tests.py
+++ b/client/tests/kvm/kvm_tests.py
@@ -541,8 +541,8 @@ def run_stress_boot(tests, params, env):
         raise error.TestFail("Could not log into first guest")
 
     num = 2
-    vms = []
     sessions = [session]
+    address_index = int(params.get("clone_address_index_base", 10))
 
     # boot the VMs
     while num <= int(params.get("max_vms")):
@@ -550,15 +550,12 @@ def run_stress_boot(tests, params, env):
             vm_name = "vm" + str(num)
 
             # clone vm according to the first one
-            vm_params = params.copy()
-            vm_params['image_snapshot'] = "yes"
-            vm_params['kill_vm'] = "yes"
-            vm_params['kill_vm_gracefully'] = "no"
+            vm_params = vm.get_params().copy()
+            vm_params["address_index"] = str(address_index)
             curr_vm = vm.clone(vm_name, vm_params)
             kvm_utils.env_register_vm(env, vm_name, curr_vm)
             params['vms'] += " " + vm_name
 
-            #vms.append(curr_vm)
             logging.info("Booting guest #%d" % num)
             if not curr_vm.create():
                 raise error.TestFail("Cannot create VM #%d" % num)
@@ -571,10 +568,11 @@ def run_stress_boot(tests, params, env):
             sessions.append(curr_vm_session)
 
             # check whether all previous ssh sessions are responsive
-            for i, vm_session in enumerate(sessions):
-                if vm_session.get_command_status(params.get("alive_test_cmd")):
+            for i, se in enumerate(sessions):
+                if se.get_command_status(params.get("alive_test_cmd")) != 0:
                     raise error.TestFail("Session #%d is not responsive" % i)
             num += 1
+            address_index += 1
 
         except (error.TestFail, OSError):
             for se in sessions:
-- 
1.5.4.1

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux