On Tue, 25 Feb 2020 03:08:00 +0000 "Tian, Kevin" <kevin.tian@xxxxxxxxx> wrote: > > From: Alex Williamson > > Sent: Thursday, February 20, 2020 2:54 AM > > > > With the VF Token interface we can now expect that a vfio userspace > > driver must be in collaboration with the PF driver, an unwitting > > userspace driver will not be able to get past the GET_DEVICE_FD step > > in accessing the device. We can now move on to actually allowing > > SR-IOV to be enabled by vfio-pci on the PF. Support for this is not > > enabled by default in this commit, but it does provide a module option > > for this to be enabled (enable_sriov=1). Enabling VFs is rather > > straightforward, except we don't want to risk that a VF might get > > autoprobed and bound to other drivers, so a bus notifier is used to > > "capture" VFs to vfio-pci using the driver_override support. We > > assume any later action to bind the device to other drivers is > > condoned by the system admin and allow it with a log warning. > > > > vfio-pci will disable SR-IOV on a PF before releasing the device, > > allowing a VF driver to be assured other drivers cannot take over the > > PF and that any other userspace driver must know the shared VF token. > > This support also does not provide a mechanism for the PF userspace > > driver itself to manipulate SR-IOV through the vfio API. With this > > patch SR-IOV can only be enabled via the host sysfs interface and the > > PF driver user cannot create or remove VFs. > > I'm not sure how many devices can be properly configured simply > with pci_enable_sriov. It is not unusual to require PF driver prepare > something before turning PCI SR-IOV capability. If you look kernel > PF drivers, there are only two using generic pci_sriov_configure_ > simple (simple wrapper like pci_enable_sriov), while most others > implementing their own callback. However vfio itself has no idea > thus I'm not sure how an user knows whether using this option can > actually meet his purpose. I may miss something here, possibly > using DPDK as an example will make it clearer. There is still the entire vfio userspace driver interface. Imagine for example that QEMU emulates the SR-IOV capability and makes a call out to libvirt (or maybe runs with privs for the PF SR-IOV sysfs attribs) when the guest enables SR-IOV. Can't we assume that any PF specific support can still be performed in the userspace/guest driver, leaving us with a very simple and generic sriov_configure callback in vfio-pci? Thanks, Alex
