Re: [kvm-unit-tests PATCH v2 8/9] arm: gic: Provide per-IRQ helper functions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 30, 2020 at 12:25:09PM +0100, Eric Auger wrote:
> From: Andre Przywara <andre.przywara@xxxxxxx>
> 
> A common theme when accessing per-IRQ parameters in the GIC distributor
> is to set fields of a certain bit width in a range of MMIO registers.
> Examples are the enabled status (one bit per IRQ), the level/edge
> configuration (2 bits per IRQ) or the priority (8 bits per IRQ).
> 
> Add a generic helper function which is able to mask and set the
> respective number of bits, given the IRQ number and the MMIO offset.
> Provide wrappers using this function to easily allow configuring an IRQ.
> 
> For now assume that private IRQ numbers always refer to the current CPU.
> In a GICv2 accessing the "other" private IRQs is not easily doable (the
> registers are banked per CPU on the same MMIO address), so we impose the
> same limitation on GICv3, even though those registers are not banked
> there anymore.
> 
> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>

Missing Eric's s-b.

> 
> ---
> 
> initialize reg
> ---
>  lib/arm/asm/gic-v3.h |  2 +
>  lib/arm/asm/gic.h    |  9 +++++
>  lib/arm/gic.c        | 90 ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 101 insertions(+)
> 
> diff --git a/lib/arm/asm/gic-v3.h b/lib/arm/asm/gic-v3.h
> index 347be2f..4a445a5 100644
> --- a/lib/arm/asm/gic-v3.h
> +++ b/lib/arm/asm/gic-v3.h
> @@ -23,6 +23,8 @@
>  #define GICD_CTLR_ENABLE_G1A		(1U << 1)
>  #define GICD_CTLR_ENABLE_G1		(1U << 0)
>  
> +#define GICD_IROUTER			0x6000
> +
>  /* Re-Distributor registers, offsets from RD_base */
>  #define GICR_TYPER			0x0008
>  
> diff --git a/lib/arm/asm/gic.h b/lib/arm/asm/gic.h
> index 1fc10a0..21cdb58 100644
> --- a/lib/arm/asm/gic.h
> +++ b/lib/arm/asm/gic.h
> @@ -15,6 +15,7 @@
>  #define GICD_IIDR			0x0008
>  #define GICD_IGROUPR			0x0080
>  #define GICD_ISENABLER			0x0100
> +#define GICD_ICENABLER			0x0180
>  #define GICD_ISPENDR			0x0200
>  #define GICD_ICPENDR			0x0280
>  #define GICD_ISACTIVER			0x0300
> @@ -73,5 +74,13 @@ extern void gic_write_eoir(u32 irqstat);
>  extern void gic_ipi_send_single(int irq, int cpu);
>  extern void gic_ipi_send_mask(int irq, const cpumask_t *dest);
>  
> +void gic_set_irq_bit(int irq, int offset);
> +void gic_enable_irq(int irq);
> +void gic_disable_irq(int irq);
> +void gic_set_irq_priority(int irq, u8 prio);
> +void gic_set_irq_target(int irq, int cpu);
> +void gic_set_irq_group(int irq, int group);
> +int gic_get_irq_group(int irq);
> +
>  #endif /* !__ASSEMBLY__ */
>  #endif /* _ASMARM_GIC_H_ */
> diff --git a/lib/arm/gic.c b/lib/arm/gic.c
> index 9430116..aa9cb86 100644
> --- a/lib/arm/gic.c
> +++ b/lib/arm/gic.c
> @@ -146,3 +146,93 @@ void gic_ipi_send_mask(int irq, const cpumask_t *dest)
>  	assert(gic_common_ops && gic_common_ops->ipi_send_mask);
>  	gic_common_ops->ipi_send_mask(irq, dest);
>  }
> +
> +enum gic_bit_access {
> +	ACCESS_READ,
> +	ACCESS_SET,
> +	ACCESS_RMW
> +};
> +
> +static u8 gic_masked_irq_bits(int irq, int offset, int bits, u8 value,
> +			      enum gic_bit_access access)
> +{
> +	void *base;
> +	int split = 32 / bits;
> +	int shift = (irq % split) * bits;
> +	u32 reg = 0, mask = ((1U << bits) - 1) << shift;
> +
> +	switch (gic_version()) {
> +	case 2:
> +		base = gicv2_dist_base();
> +		break;
> +	case 3:
> +		if (irq < 32)
> +			base = gicv3_sgi_base();
> +		else
> +			base = gicv3_dist_base();
> +		break;
> +	default:
> +		return 0;
> +	}
> +	base += offset + (irq / split) * 4;
> +
> +	switch (access) {
> +	case ACCESS_READ:
> +		return (readl(base) & mask) >> shift;
> +	case ACCESS_SET:
> +		reg = 0;
> +		break;
> +	case ACCESS_RMW:
> +		reg = readl(base) & ~mask;
> +		break;
> +	}
> +
> +	writel(reg | ((u32)value << shift), base);
> +
> +	return 0;
> +}
> +
> +void gic_set_irq_bit(int irq, int offset)
> +{
> +	gic_masked_irq_bits(irq, offset, 1, 1, ACCESS_SET);
> +}
> +
> +void gic_enable_irq(int irq)
> +{
> +	gic_set_irq_bit(irq, GICD_ISENABLER);
> +}
> +
> +void gic_disable_irq(int irq)
> +{
> +	gic_set_irq_bit(irq, GICD_ICENABLER);
> +}
> +
> +void gic_set_irq_priority(int irq, u8 prio)
> +{
> +	gic_masked_irq_bits(irq, GICD_IPRIORITYR, 8, prio, ACCESS_RMW);
> +}
> +
> +void gic_set_irq_target(int irq, int cpu)
> +{
> +	if (irq < 32)
> +		return;
> +
> +	if (gic_version() == 2) {
> +		gic_masked_irq_bits(irq, GICD_ITARGETSR, 8, 1U << cpu,
> +				    ACCESS_RMW);
> +
> +		return;
> +	}
> +
> +	writeq(cpus[cpu], gicv3_dist_base() + GICD_IROUTER + irq * 8);
> +}
> +
> +void gic_set_irq_group(int irq, int group)
> +{
> +	gic_masked_irq_bits(irq, GICD_IGROUPR, 1, group, ACCESS_RMW);
> +}
> +
> +int gic_get_irq_group(int irq)
> +{
> +	return gic_masked_irq_bits(irq, GICD_IGROUPR, 1, 0, ACCESS_READ);
> +}
> -- 
> 2.20.1
> 
>

Looks good to me.

Thanks,
drew




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux