Re: [kvm-unit-tests PATCH v3 5/5] x86: VMX: Add tests for monitor trap flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 02/24/2020 04:09 PM, Oliver Upton wrote:
On Fri, Feb 7, 2020 at 2:36 AM Oliver Upton <oupton@xxxxxxxxxx> wrote:
Test to verify that MTF VM-exits into host are synthesized when the
'monitor trap flag' processor-based VM-execution control is set under
various conditions.

Expect an MTF VM-exit if instruction execution produces no events other
than MTF. Should instruction execution produce a concurrent debug-trap
and MTF event, expect an MTF VM-exit with the 'pending debug exceptions'
VMCS field set. Expect an MTF VM-exit to follow event delivery should
instruction execution generate a higher-priority event, such as a
general-protection fault. Lastly, expect an MTF VM-exit to follow
delivery of a debug-trap software exception (INT1/INT3/INTO/INT n).

Signed-off-by: Oliver Upton <oupton@xxxxxxxxxx>
Reviewed-by: Jim Mattson <jmattson@xxxxxxxxxx>
---
  x86/vmx.h       |   1 +
  x86/vmx_tests.c | 157 ++++++++++++++++++++++++++++++++++++++++++++++++
  2 files changed, 158 insertions(+)

diff --git a/x86/vmx.h b/x86/vmx.h
index 6214400f2b53..6adf0916564b 100644
--- a/x86/vmx.h
+++ b/x86/vmx.h
@@ -399,6 +399,7 @@ enum Ctrl0 {
         CPU_NMI_WINDOW          = 1ul << 22,
         CPU_IO                  = 1ul << 24,
         CPU_IO_BITMAP           = 1ul << 25,
+       CPU_MTF                 = 1ul << 27,
         CPU_MSR_BITMAP          = 1ul << 28,
         CPU_MONITOR             = 1ul << 29,
         CPU_PAUSE               = 1ul << 30,
diff --git a/x86/vmx_tests.c b/x86/vmx_tests.c
index b31c360c5f3c..0e2c2f8a7d34 100644
--- a/x86/vmx_tests.c
+++ b/x86/vmx_tests.c
@@ -4970,6 +4970,162 @@ static void test_vmx_preemption_timer(void)
         vmcs_write(EXI_CONTROLS, saved_exit);
  }

+extern unsigned char test_mtf1;
+extern unsigned char test_mtf2;
+extern unsigned char test_mtf3;
+
+__attribute__((noclone)) static void test_mtf_guest(void)
+{
+       asm ("vmcall;\n\t"
+            "out %al, $0x80;\n\t"
+            "test_mtf1:\n\t"
+            "vmcall;\n\t"
+            "out %al, $0x80;\n\t"
+            "test_mtf2:\n\t"
+            /*
+             * Prepare for the 'MOV CR3' test. Attempt to induce a
+             * general-protection fault by moving a non-canonical address into
+             * CR3. The 'MOV CR3' instruction does not take an imm64 operand,
+             * so we must MOV the desired value into a register first.
+             *
+             * MOV RAX is done before the VMCALL such that MTF is only enabled
+             * for the instruction under test.
+             */
+            "mov $0x8000000000000000, %rax;\n\t"
+            "vmcall;\n\t"
+            "mov %rax, %cr3;\n\t"
+            "test_mtf3:\n\t"
+            "vmcall;\n\t"
+            /*
+             * ICEBP/INT1 instruction. Though the instruction is now
+             * documented, don't rely on assemblers enumerating the
+             * instruction. Resort to hand assembly.
+             */
+            ".byte 0xf1;\n\t");
+}
+
+static void test_mtf_gp_handler(struct ex_regs *regs)
+{
+       regs->rip = (unsigned long) &test_mtf3;
+}
+
+static void test_mtf_db_handler(struct ex_regs *regs)
+{
+}
+
+static void enable_mtf(void)
+{
+       u32 ctrl0 = vmcs_read(CPU_EXEC_CTRL0);
+
+       vmcs_write(CPU_EXEC_CTRL0, ctrl0 | CPU_MTF);
+}
+
+static void disable_mtf(void)
+{
+       u32 ctrl0 = vmcs_read(CPU_EXEC_CTRL0);
+
+       vmcs_write(CPU_EXEC_CTRL0, ctrl0 & ~CPU_MTF);
+}
+
+static void enable_tf(void)
+{
+       unsigned long rflags = vmcs_read(GUEST_RFLAGS);
+
+       vmcs_write(GUEST_RFLAGS, rflags | X86_EFLAGS_TF);
+}
+
+static void disable_tf(void)
+{
+       unsigned long rflags = vmcs_read(GUEST_RFLAGS);
+
+       vmcs_write(GUEST_RFLAGS, rflags & ~X86_EFLAGS_TF);
+}
+
+static void report_mtf(const char *insn_name, unsigned long exp_rip)
+{
+       unsigned long rip = vmcs_read(GUEST_RIP);
+
+       assert_exit_reason(VMX_MTF);
+       report(rip == exp_rip, "MTF VM-exit after %s instruction. RIP: 0x%lx (expected 0x%lx)",
+              insn_name, rip, exp_rip);
+}
+
+static void vmx_mtf_test(void)
+{
+       unsigned long pending_dbg;
+       handler old_gp, old_db;
+
+       if (!(ctrl_cpu_rev[0].clr & CPU_MTF)) {
+               printf("CPU does not support the 'monitor trap flag' processor-based VM-execution control.\n");
+               return;
+       }
+
+       test_set_guest(test_mtf_guest);
+
+       /* Expect an MTF VM-exit after OUT instruction */
+       enter_guest();
+       skip_exit_vmcall();
+
+       enable_mtf();
+       enter_guest();
+       report_mtf("OUT", (unsigned long) &test_mtf1);
+       disable_mtf();
+
+       /*
+        * Concurrent #DB trap and MTF on instruction boundary. Expect MTF
+        * VM-exit with populated 'pending debug exceptions' VMCS field.
+        */
+       enter_guest();
+       skip_exit_vmcall();
+
+       enable_mtf();
+       enable_tf();
+
+       enter_guest();
+       report_mtf("OUT", (unsigned long) &test_mtf2);
+       pending_dbg = vmcs_read(GUEST_PENDING_DEBUG);
+       report(pending_dbg & DR_STEP,
+              "'pending debug exceptions' field after MTF VM-exit: 0x%lx (expected 0x%lx)",
+              pending_dbg, (unsigned long) DR_STEP);
+
+       disable_mtf();
+       disable_tf();
+       vmcs_write(GUEST_PENDING_DEBUG, 0);
+
+       /*
+        * #GP exception takes priority over MTF. Expect MTF VM-exit with RIP
+        * advanced to first instruction of #GP handler.
+        */
+       enter_guest();
+       skip_exit_vmcall();
+
+       old_gp = handle_exception(GP_VECTOR, test_mtf_gp_handler);
+
+       enable_mtf();
+       enter_guest();
+       report_mtf("MOV CR3", (unsigned long) get_idt_addr(&boot_idt[GP_VECTOR]));
+       disable_mtf();
+
+       /*
+        * Concurrent MTF and privileged software exception (i.e. ICEBP/INT1).
+        * MTF should follow the delivery of #DB trap, though the SDM doesn't
+        * provide clear indication of the relative priority.
+        */
+       enter_guest();
+       skip_exit_vmcall();
+
+       handle_exception(GP_VECTOR, old_gp);
+       old_db = handle_exception(DB_VECTOR, test_mtf_db_handler);
+
+       enable_mtf();
+       enter_guest();
+       report_mtf("INT1", (unsigned long) get_idt_addr(&boot_idt[DB_VECTOR]));
+       disable_mtf();
+
+       enter_guest();
+       handle_exception(DB_VECTOR, old_db);
+}
+
  /*
   * Tests for VM-execution control fields
   */
@@ -9505,5 +9661,6 @@ struct vmx_test vmx_tests[] = {
         TEST(atomic_switch_max_msrs_test),
         TEST(atomic_switch_overflow_msrs_test),
         TEST(rdtsc_vmexit_diff_test),
+       TEST(vmx_mtf_test),
         { NULL, NULL, NULL, NULL, NULL, {0} },
  };
--
2.25.0.341.g760bfbb309-goog

Friendly ping :) (Just on this patch, 1-4 have already been applied)

--
Thanks,
Oliver
I know Paolo has already applied this patch. Wanted to send out the comments anyway as I was reviewing it...

    1. The commit header should have "nVMX" instead of "VMX". That's important for searching git history.     2. It would be better for readability if the commit message lists the test scenarios as numbered items or bullet points instead of putting them all in the same paragraph.     3. Section 25.5.2 in the SDM has more scenarios for MTF VM-exits, but the test covers only a few scenarios like #DB, #GP etc.



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux