<snip>
+static int vfio_iova_dirty_bitmap(struct vfio_iommu *iommu, dma_addr_t iova,
+ size_t size, uint64_t pgsize,
+ unsigned char __user *bitmap)
+{
+ struct vfio_dma *dma;
+ dma_addr_t i = iova, iova_limit;
+ unsigned int bsize, nbits = 0, l = 0;
+ unsigned long pgshift = __ffs(pgsize);
+
+ while ((dma = vfio_find_dma(iommu, i, pgsize))) {
+ int ret, j;
+ unsigned int npages = 0, shift = 0;
+ unsigned char temp = 0;
+
+ /* mark all pages dirty if all pages are pinned and mapped. */
+ if (dma->iommu_mapped) {
+ iova_limit = min(dma->iova + dma->size, iova + size);
+ npages = iova_limit/pgsize;
+ bitmap_set(dma->bitmap, 0, npages);
npages is derived from iova_limit, which is the number of bits to set
dirty relative to the first requested iova, not iova zero, ie. the set
of dirty bits is offset from those requested unless iova == dma->iova.
Right, fixing.
Also I hope dma->bitmap was actually allocated. Not only does the
START error path potentially leave dirty tracking enabled without all
the bitmap allocated, when does the bitmap get allocated for a new
vfio_dma when dirty tracking is enabled? Seems it only occurs if a
vpfn gets marked dirty.
Right.
Fixing error paths.
+ } else if (dma->bitmap) {
+ struct rb_node *n = rb_first(&dma->pfn_list);
+ bool found = false;
+
+ for (; n; n = rb_next(n)) {
+ struct vfio_pfn *vpfn = rb_entry(n,
+ struct vfio_pfn, node);
+ if (vpfn->iova >= i) {
+ found = true;
+ break;
+ }
+ }
+
+ if (!found) {
+ i += dma->size;
+ continue;
+ }
+
+ for (; n; n = rb_next(n)) {
+ unsigned int s;
+ struct vfio_pfn *vpfn = rb_entry(n,
+ struct vfio_pfn, node);
+
+ if (vpfn->iova >= iova + size)
+ break;
+
+ s = (vpfn->iova - dma->iova) >> pgshift;
+ bitmap_set(dma->bitmap, s, 1);
+
+ iova_limit = vpfn->iova + pgsize;
+ }
+ npages = iova_limit/pgsize;
Isn't iova_limit potentially uninitialized here? For example, if our
vfio_dma covers {0,8192} and we ask for the bitmap of {0,4096} and
there's a vpfn at {4096,8192}. I think that means vpfn->iova >= i
(4096 >= 0), so we break with found = true, then we test 4096 >= 0 +
4096 and break, and npages = ????/pgsize.
Right, Fixing it.
+ }
+
+ bsize = dirty_bitmap_bytes(npages);
+ shift = nbits % BITS_PER_BYTE;
+
+ if (npages && shift) {
+ l--;
+ if (!access_ok((void __user *)bitmap + l,
+ sizeof(unsigned char)))
+ return -EINVAL;
+
+ ret = __get_user(temp, bitmap + l);
I don't understand why we care to get the user's bitmap, are we trying
to leave whatever garbage they might have set in it and only also set
the dirty bits? That seems unnecessary.
Suppose dma mapped ranges are {start, size}:
{0, 0xa000}, {0xa000, 0x10000}
Bitmap asked from 0 - 0x10000. Say suppose all pages are dirty.
Then in first iteration for dma {0,0xa000} there are 10 pages, so 10
bits are set, put_user() happens for 2 bytes, (00000011 11111111b).
In second iteration for dma {0xa000, 0x10000} there are 6 pages and
these bits should be appended to previous byte. So get_user() that byte,
then shift-OR rest of the bitmap, result should be: (11111111 11111111b)
Without get_user() and shift-OR, resulting bitmap would be
111111 00000011 11111111b which would be wrong.
Seems like if we use a put_user() approach then we should look for
adjacent vfio_dmas within the same byte/word/dword before we push it to
the user to avoid this sort of inefficiency.
Won't that add more complication to logic?
Also why do we need these access_ok() checks when we already checked
the range at the start of the ioctl?
Since pointer is updated runtime here, better to check that pointer
before using that pointer.
Sorry, I still don't understand this, we check access_ok() with a
pointer and a length, therefore as long as we're incrementing the
pointer within that length, why do we need to retest?
Ideally caller for put_user() and get_user() must check the pointer with
access_ok() which is used as argument to these functions before calling
this function. That makes sure that pointer is correct after pointer
arithematic. May be lets remove previous check of pointer and length,
but keep these checks.
+ if (ret)
+ return ret;
+ }
+
+ for (j = 0; j < bsize; j++, l++) {
+ temp = temp |
+ (*((unsigned char *)dma->bitmap + j) << shift);
|=
+ if (!access_ok((void __user *)bitmap + l,
+ sizeof(unsigned char)))
+ return -EINVAL;
+
+ ret = __put_user(temp, bitmap + l);
+ if (ret)
+ return ret;
+ if (shift) {
+ temp = *((unsigned char *)dma->bitmap + j) >>
+ (BITS_PER_BYTE - shift);
+ }
When shift == 0, temp just seems to accumulate bits that never get
cleared.
Hope example above explains the shift logic.
But that example is when shift is non-zero. When shift is zero, each
iteration of the loop just ORs in new bits to temp without ever
clearing the bits for the previous iteration.
Oh right, fixing it.
+ }
+
+ nbits += npages;
+
+ i = min(dma->iova + dma->size, iova + size);
+ if (i >= iova + size)
+ break;
So whether we error or succeed, we leave cruft in dma->bitmap for the
next pass. It doesn't seem to make any sense why we pre-allocated the
bitmap, we might as well just allocate it on demand here. Actually, if
we're not going to do a copy_to_user() for some range of the bitmap,
I'm not sure what it's purpose is at all. I think the big advantages
of the bitmap are that we can't amortize the cost across every pinned
page or DMA mapping, we don't need the overhead of tracking unmapped
vpfns, and we can use copy_to_user() to push the bitmap out. We're not
getting any of those advantages here.
That would still not work if dma range size is not multiples of 8 pages.
See example above.
I don't understand this comment, what about the example above justifies
the bitmap?
copy_to_user() could be used if dma range size is not multiple of 8 pages.
As I understand the above algorithm, we find a vfio_dma
overlapping the request and populate the bitmap for that range. Then
we go back and put_user() for each byte that we touched. We could
instead simply work on a one byte buffer as we enumerate the requested
range and do a put_user() ever time we reach the end of it and have bits
set. That would greatly simplify the above example. But I would expect > that we're a) more likely to get asked for ranges covering a single
vfio_dma
QEMU ask for single vfio_dma during each iteration.
If we restrict this ABI to cover single vfio_dma only, then it
simplifies the logic here. That was my original suggestion. Should we
think about that again?
and b) we're going to spend far more time operating in the
middle of the range and limiting ourselves to one-byte operations there
seems absurd. If we want to specify that the user provides 4-byte
aligned buffers and naturally aligned iova ranges to make our lives
easier in the kernel, now would be the time to do that.
+ }
+ return 0;
+}
+
+static long verify_bitmap_size(unsigned long npages, unsigned long bitmap_size)
+{
+ long bsize;
+
+ if (!bitmap_size || bitmap_size > SIZE_MAX)
+ return -EINVAL;
+
+ bsize = dirty_bitmap_bytes(npages);
+
+ if (bitmap_size < bsize)
+ return -EINVAL;
+
+ return bsize;
+}
Seems like this could simply return int, -errno or zero for success.
The returned bsize is not used for anything else.
ok.
+
static int vfio_dma_do_unmap(struct vfio_iommu *iommu,
struct vfio_iommu_type1_dma_unmap *unmap)
{
@@ -2277,6 +2478,80 @@ static long vfio_iommu_type1_ioctl(void *iommu_data,
return copy_to_user((void __user *)arg, &unmap, minsz) ?
-EFAULT : 0;
+ } else if (cmd == VFIO_IOMMU_DIRTY_PAGES) {
+ struct vfio_iommu_type1_dirty_bitmap range;
+ uint32_t mask = VFIO_IOMMU_DIRTY_PAGES_FLAG_START |
+ VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP |
+ VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP;
+ int ret;
+
+ if (!iommu->v2)
+ return -EACCES;
+
+ minsz = offsetofend(struct vfio_iommu_type1_dirty_bitmap,
+ bitmap);
We require the user to provide iova, size, pgsize, bitmap_size, and
bitmap fields to START/STOP? Why?
No. But those are part of structure.
But we do require it, minsz here includes all those fields, which would
probably make a user scratch their head wondering why they need to pass
irrelevant data for START/STOP. It almost implies that we support
starting and stopping dirty logging for specific ranges of the IOVA
space. We could define the structure, for example:
struct vfio_iommu_type1_dirty_bitmap {
__u32 argsz;
__u32 flags;
__u8 data[];
};
struct vfio_iommu_type1_dirty_bitmap_get {
__u64 iova;
__u64 size;
__u64 pgsize;
__u64 bitmap_size;
void __user *bitmap;
};
Where data[] is defined as the latter structure when FLAG_GET_BITMAP is
specified.
Ok. Changing as above.
BTW, don't we need to specify the trailing void* as __u64?
We could theoretically be talking to an ILP32 user process. Thanks,
Even on ILP32, using void* pointer will reserve the size required to
save a pointer address. I don't think using void* should be problem.
Thanks,
Kirti
Alex
+
+ if (copy_from_user(&range, (void __user *)arg, minsz))
+ return -EFAULT;
+
+ if (range.argsz < minsz || range.flags & ~mask)
+ return -EINVAL;
+
+ /* only one flag should be set at a time */
+ if (__ffs(range.flags) != __fls(range.flags))
+ return -EINVAL;
+
+ if (range.flags & VFIO_IOMMU_DIRTY_PAGES_FLAG_START) {
+ unsigned long iommu_pgsizes = vfio_pgsize_bitmap(iommu);
+
+ mutex_lock(&iommu->lock);
+ iommu->dirty_page_tracking = true;
+ ret = vfio_dma_all_bitmap_alloc(iommu, iommu_pgsizes);
So dirty page tracking is enabled even if we fail to allocate all the
bitmaps? Shouldn't this return an error if dirty tracking is already
enabled?
Adding error handling here in next patch.
+ mutex_unlock(&iommu->lock);
+ return ret;
+ } else if (range.flags & VFIO_IOMMU_DIRTY_PAGES_FLAG_STOP) {
+ mutex_lock(&iommu->lock);
+ iommu->dirty_page_tracking = false;
Shouldn't we only allow STOP if tracking is enabled?
Right,adding.
+ vfio_dma_all_bitmap_free(iommu);
Here's where that user induced double free enters the picture.
Error handling as mentioned above will prevent double free.
Thanks,
Kirti
+ vfio_remove_unpinned_from_dma_list(iommu);
+ mutex_unlock(&iommu->lock);
+ return 0;
+ } else if (range.flags &
+ VFIO_IOMMU_DIRTY_PAGES_FLAG_GET_BITMAP) {
+ long bsize;
+ unsigned long pgshift = __ffs(range.pgsize);
+ uint64_t iommu_pgsizes = vfio_pgsize_bitmap(iommu);
+ uint64_t iommu_pgmask =
+ ((uint64_t)1 << __ffs(iommu_pgsizes)) - 1;
+
+ if ((range.pgsize & iommu_pgsizes) != range.pgsize)
+ return -EINVAL;
+ if (range.iova & iommu_pgmask)
+ return -EINVAL;
+ if (!range.size || range.size & iommu_pgmask)
+ return -EINVAL;
+ if (range.iova + range.size < range.iova)
+ return -EINVAL;
+ if (!access_ok((void __user *)range.bitmap,
+ range.bitmap_size))
+ return -EINVAL;
+
+ bsize = verify_bitmap_size(range.size >> pgshift,
+ range.bitmap_size);
+ if (bsize < 0)
+ return bsize;
+
+ mutex_lock(&iommu->lock);
+ if (iommu->dirty_page_tracking)
+ ret = vfio_iova_dirty_bitmap(iommu, range.iova,
+ range.size, range.pgsize,
+ (unsigned char __user *)range.bitmap);
+ else
+ ret = -EINVAL;
+ mutex_unlock(&iommu->lock);
+
+ return ret;
+ }
}
return -ENOTTY;
Thanks,
Alex
