Differences between previous patch:
- Use a loop waiting for some seconds to compare output of a command
- Use a loop waiting for some seconds to catch string indicates which
PCI device
- Add option kill_vm_on_error in block_hotplug since once a model failed
to be hot removed, it will affect next model
A better result I can get is:
-------
./scan_results.py
test status
seconds info
---- ------
------- ----
Fedora.11.32.nic_hotplug.nic_8139 GOOD
107 completed successfully
Fedora.11.32.nic_hotplug.nic_virtio FAIL
76 Not found pci model:virtio; Command is:lspci | tail -n1
Fedora.11.32.block_hotplug.fmt_qcow2.block_virtio GOOD
92 completed successfully
Fedora.11.32.block_hotplug.fmt_qcow2.block_scsi GOOD
48 completed successfully
RHEL.5.3.i386.nic_hotplug.nic_8139 GOOD
144 completed successfully
RHEL.5.3.i386.nic_hotplug.nic_virtio GOOD
48 completed successfully
RHEL.5.3.i386.block_hotplug.fmt_qcow2.block_virtio GOOD
47 completed successfully
RHEL.5.3.i386.block_hotplug.fmt_qcow2.block_scsi GOOD
47 completed successfully
Win2008.32.nic_hotplug.nic_8139 GOOD
141 completed successfully
Win2008.32.nic_hotplug.nic_virtio GOOD
99 completed successfully
Win2008.32.block_hotplug.fmt_qcow2.block_scsi GOOD
90 completed successfully
---- GOOD
953
Signed-off-by: Yolkfull Chow <yzhou@xxxxxxxxxx>
---
client/tests/kvm/kvm.py | 1 +
client/tests/kvm/kvm_tests.cfg.sample | 67 +++++++++++++++++++++
client/tests/kvm/kvm_tests.py | 105 +++++++++++++++++++++++++++++++++
client/tests/kvm/kvm_vm.py | 2 +
4 files changed, 175 insertions(+), 0 deletions(-)
diff --git a/client/tests/kvm/kvm.py b/client/tests/kvm/kvm.py
index 070e463..f985388 100644
--- a/client/tests/kvm/kvm.py
+++ b/client/tests/kvm/kvm.py
@@ -56,6 +56,7 @@ class kvm(test.test):
"linux_s3": test_routine("kvm_tests", "run_linux_s3"),
"stress_boot": test_routine("kvm_tests", "run_stress_boot"),
"timedrift": test_routine("kvm_tests", "run_timedrift"),
+ "pci_hotplug": test_routine("kvm_tests", "run_pci_hotplug"),
}
# Make it possible to import modules from the test's bindir
diff --git a/client/tests/kvm/kvm_tests.cfg.sample b/client/tests/kvm/kvm_tests.cfg.sample
index 7cd12cb..9af1bc8 100644
--- a/client/tests/kvm/kvm_tests.cfg.sample
+++ b/client/tests/kvm/kvm_tests.cfg.sample
@@ -118,6 +118,53 @@ variants:
kill_vm = yes
kill_vm_gracefully = no
+ - nic_hotplug:
+ type = pci_hotplug
+ pci_type = nic
+ modprobe_acpiphp = no
+ reference_cmd = lspci
+ find_pci_cmd = 'lspci | tail -n1'
+ pci_test_cmd = 'nslookup www.redhat.com'
+ wait_secs_for_hook_up = 3
+ variants:
+ - nic_8139:
+ pci_model = rtl8139
+ match_string = "8139"
+ - nic_virtio:
+ pci_model = virtio
+ match_string = "Virtio network device"
+ - nic_e1000:
+ pci_model = e1000
+ match_string = "Gigabit Ethernet Controller"
+
+ - block_hotplug:
+ type = pci_hotplug
+ pci_type = block
+ reference_cmd = lspci
+ find_pci_cmd = 'lspci | tail -n1'
+ images += " stg"
+ boot_drive_stg = no
+ image_name_stg = storage
+ image_size_stg = 1G
+ remove_image_stg = yes
+ force_create_image_stg = yes
+ pci_test_cmd = "yes | mke2fs `fdisk -l 2>&1 | awk '/\/dev\/[sv]d[a-z] doesn/ {print $2}'`"
+ wait_secs_for_hook_up = 3
+ kill_vm_on_error = yes
+ variants:
+ - block_virtio:
+ pci_model = virtio
+ match_string = "Virtio block device"
+ - block_scsi:
+ pci_model = scsi
+ match_string = "SCSI"
+ variants:
+ - fmt_qcow2:
+ image_format_stg = qcow2
+ - fmt_raw:
+ image_format_stg = raw
+ only Fedora Ubuntu Windows
+
# NICs
variants:
@@ -259,6 +306,10 @@ variants:
- RHEL:
no setup
ssh_prompt = "\[root@.{0,50}][\#\$] "
+ nic_hotplug:
+ modprobe_module = acpiphp
+ block_hotplug:
+ modprobe_module = acpiphp
variants:
- 5.3.i386:
@@ -345,6 +396,22 @@ variants:
# Alternative host load:
#host_load_command = "dd if=/dev/urandom of=/dev/null"
host_load_instances = 8
+ nic_hotplug:
+ reference_cmd = ipconfig /all
+ find_pci_cmd = ipconfig /all | find "Description"
+ wait_secs_for_hook_up = 10
+ nic_e1000:
+ match_string = "Intel(R) PRO/1000 MT Network Connection"
+ nic_virtio:
+ match_string = "VirtIO Ethernet"
+ block_hotplug:
+ use_telnet = yes
+ ssh_port = 23
+ guest_port_ssh = 23
+ wait_secs_for_hook_up = 10
+ reference_cmd = wmic diskdrive list brief
+ find_pci_cmd = wmic diskdrive list brief
+ pci_test_cmd = echo select disk 1 > dt && echo online disk >> dt && echo detail disk >> dt && echo exit >> dt && diskpart /s dt
variants:
- Win2000:
diff --git a/client/tests/kvm/kvm_tests.py b/client/tests/kvm/kvm_tests.py
index 9784ec9..5a1fc21 100644
--- a/client/tests/kvm/kvm_tests.py
+++ b/client/tests/kvm/kvm_tests.py
@@ -743,3 +743,108 @@ def run_timedrift(test, params, env):
% drift_total)
session.close()
+
+
+def run_pci_hotplug(test, params, env):
+ """
+ Test pci devices' hotplug
+ 1) PCI add a deivce (NIC / block)
+ 2) Compare 'info pci' output
+ 3) Compare 'reference_cmd' output
+ 4) Verify whether pci_model is shown in 'pci_find_cmd'
+ 5) Check whether the newly added pci device works fine
+ 6) PCI delete the device, verify whether could remove the pci device
+
+ @param test: kvm test object
+ @param params: Dictionary with the test parameters
+ @param env: Dictionary with test environment.
+ """
+ vm = kvm_utils.env_get_vm(env, params.get("main_vm"))
+ if not vm:
+ raise error.TestError("VM object not found in environment")
+ if not vm.is_alive():
+ raise error.TestError("VM seems to be dead; Test requires a living VM")
+
+ logging.info("Waiting for guest to be up...")
+
+ session = kvm_utils.wait_for(vm.ssh_login, 240, 0, 2)
+ if not session:
+ raise error.TestFail("Could not log into guest")
+
+ logging.info("Logged in")
+
+ # Modprobe the module if specified in config file
+ if params.get("modprobe_module"):
+ module = params.get("modprobe_module")
+ if session.get_command_status("modprobe %s" % module):
+ raise error.TestError("Modprobe module '%s' failed" % module)
+
+ # Get output of command 'info pci' as reference
+ s, info_pci_ref = vm.send_monitor_cmd("info pci")
+
+ # Get output of command as reference
+ reference = session.get_command_output(params.get("reference_cmd"))
+
+ tested_model = params.get("pci_model")
+ logging.info("Testing hotplug pci device:%s" % tested_model)
+ test_type = params.get("pci_type")
+ if test_type == "nic":
+ pci_add_cmd = "pci_add pci_addr=auto nic model=%s" % tested_model
+ elif test_type == "block":
+ image_name = params.get("image_name_stg")
+ image_filename = "%s.%s" % (image_name, params.get("image_format_stg"))
+ image_dir = os.path.join(test.bindir, "images")
+ storage_name = os.path.join(image_dir, image_filename)
+ pci_add_cmd = ("pci_add pci_addr=auto storage file=%s,if=%s" %
+ (storage_name, tested_model))
+
+ # Implement pci_add
+ s, add_output = vm.send_monitor_cmd(pci_add_cmd)
+ if not "OK domain" in add_output:
+ raise error.TestFail("Add device failed;Hypervisor command is: %s; "
+ "Output: %s" % (pci_add_cmd, add_output))
+
+ # Compare the output of 'info pci'
+ s, after_add = vm.send_monitor_cmd("info pci")
+ if after_add == info_pci_ref:
+ raise error.TestFail("No new PCI device shown after executing "
+ "hypervisor command: 'info pci'")
+
+ # Define a helper function to compare the output
+ def new_shown():
+ o = session.get_command_output(params.get("reference_cmd"))
+ if reference == o:
+ return False
+ return True
+
+ secs = int(params.get("wait_secs_for_hook_up"))
+ if not kvm_utils.wait_for(new_shown, 30, secs, 3):
+ raise error.TestFail("No new device shown in output of command "
+ "executed in guest: %s" % ref_cmd)
+
+ # Define a helper function to catch PCI device string
+ def find_pci():
+ output = session.get_command_output(params.get("find_pci_cmd"))
+ if not params.get("match_string") in output:
+ return False
+ return True
+
+ if not kvm_utils.wait_for(find_pci, 30, 3, 3):
+ raise error.TestFail("Not found pci model:%s; Command is:%s" %
+ (tested_model, params.get("find_pci_cmd")))
+
+ # Test the newly added device
+ s, o = session.get_command_status_output(params.get("pci_test_cmd"))
+ if s:
+ raise error.TestFail("Check for %s device failed after PCI hotplug;"
+ "Output: %s" % (test_type, o))
+
+ # Delete the added pci device
+ slot_id = "0" + add_output.split(",")[2].split()[1]
+ cmd = "pci_del pci_addr=%s" % slot_id
+ s, after_del = vm.send_monitor_cmd(cmd)
+ if after_del == after_add:
+ raise error.TestFail("Failed to hot remove pci device:%s; "
+ "Hypervisor command: %s" % (tested_model, cmd))
+
+ session.close()
diff --git a/client/tests/kvm/kvm_vm.py b/client/tests/kvm/kvm_vm.py
index eba9b84..4a7a85c 100644
--- a/client/tests/kvm/kvm_vm.py
+++ b/client/tests/kvm/kvm_vm.py
@@ -225,6 +225,8 @@ class VM:
for image_name in kvm_utils.get_sub_dict_names(params, "images"):
image_params = kvm_utils.get_sub_dict(params, image_name)
+ if image_params.get("boot_drive") == "no":
+ continue
qemu_cmd += " -drive file=%s" % get_image_filename(image_params,
image_dir)
if image_params.get("drive_format"):
--
1.6.2.5
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
