Node not reachable on vlan, after vlan is used by virtual machine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

i have a strange behavior on my linux system and can not explain it.
Help would be greatly appreciated.

host proxmox1 with a trunk/bond interface to Cisco-Switch.
proxmox1 has mgmt in vlan100 on same bond:

bond1.100@bond1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UP group default qlen 1000
link/ether 3c:fd:fc:9a:7d:cc brd ff:ff:ff:ff:ff:ff
inet 10.64.253.203/24 brd 10.64.253.255 scope global bond1.100

All is fine and proxmox1 is reachable from other machines through vlan 100.

The routing between the vlans, is done by a pfsense firewall on
_another_ proxmox-node.

Now instantly when i move the firewall to proxmox1-host, the proxmox1
host is not reachable through mgmt-vlan 100 anymore.

Ideas?

Thank you



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux