On Wed, 8 Jan 2020 19:32:21 +0800
Dongjiu Geng <gengdongjiu@xxxxxxxxxx> wrote:
> kvm_arch_on_sigbus_vcpu() error injection uses source_id as
> index in etc/hardware_errors to find out Error Status Data
> Block entry corresponding to error source. So supported source_id
> values should be assigned here and not be changed afterwards to
> make sure that guest will write error into expected Error Status
> Data Block even if guest was migrated to a newer QEMU.
>
> Before QEMU writes a new error to ACPI table, it will check whether
> previous error has been acknowledged. Otherwise it will ignore the new
> error. For the errors section type, QEMU simulate it to memory section
> error.
>
> Signed-off-by: Dongjiu Geng <gengdongjiu@xxxxxxxxxx>
> Signed-off-by: Xiang Zheng <zhengxiang9@xxxxxxxxxx>
> Reviewed-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
> ---
> hw/acpi/ghes.c | 224 ++++++++++++++++++++++++++++++++++++++++++++++++-
> include/hw/acpi/ghes.h | 3 +
> include/qemu/uuid.h | 5 ++
> 3 files changed, 230 insertions(+), 2 deletions(-)
>
> diff --git a/hw/acpi/ghes.c b/hw/acpi/ghes.c
> index 68f4abf..f2ecffe 100644
> --- a/hw/acpi/ghes.c
> +++ b/hw/acpi/ghes.c
> @@ -28,21 +28,56 @@
> #include "sysemu/sysemu.h"
> #include "qemu/error-report.h"
>
> -#include "hw/acpi/bios-linker-loader.h"
why it's moved to header?
> -
> #define ACPI_GHES_ERRORS_FW_CFG_FILE "etc/hardware_errors"
> #define ACPI_GHES_DATA_ADDR_FW_CFG_FILE "etc/hardware_errors_addr"
>
> /* The max size in bytes for one error block */
> #define ACPI_GHES_MAX_RAW_DATA_LENGTH 0x400
> +
> /* Now only support ARMv8 SEA notification type error source */
> #define ACPI_GHES_ERROR_SOURCE_COUNT 1
> +
> /* Generic Hardware Error Source version 2 */
> #define ACPI_GHES_SOURCE_GENERIC_ERROR_V2 10
> +
> /* Address offset in Generic Address Structure(GAS) */
> #define GAS_ADDR_OFFSET 4
>
> /*
> + * The total size of Generic Error Data Entry
> + * ACPI 6.1/6.2: 18.3.2.7.1 Generic Error Data,
> + * Table 18-343 Generic Error Data Entry
> + */
> +#define ACPI_GHES_DATA_LENGTH 72
> +
> +/* The memory section CPER size, UEFI 2.6: N.2.5 Memory Error Section */
> +#define ACPI_GHES_MEM_CPER_LENGTH 80
> +
> +/* Masks for block_status flags */
> +#define ACPI_GEBS_UNCORRECTABLE 1
> +
> +#define UEFI_CPER_SEC_PLATFORM_MEM \
> + UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \
> + 0xED, 0x7C, 0x83, 0xB1)
> +
> +/*
> + * Total size for Generic Error Status Block except Generic Error Data Entries
> + * ACPI 6.2: 18.3.2.7.1 Generic Error Data,
> + * Table 18-380 Generic Error Status Block
> + */
> +#define ACPI_GHES_GESB_SIZE 20
> +
> +/*
> + * Values for error_severity field
> + */
> +enum AcpiGenericErrorSeverity {
> + ACPI_CPER_SEV_RECOVERABLE = 0,
> + ACPI_CPER_SEV_FATAL = 1,
> + ACPI_CPER_SEV_CORRECTED = 2,
> + ACPI_CPER_SEV_NONE = 3,
> +};
> +
> +/*
> * Hardware Error Notification
> * ACPI 4.0: 17.3.2.7 Hardware Error Notification
> * Composes dummy Hardware Error Notification descriptor of specified type
> @@ -73,6 +108,127 @@ static void build_ghes_hw_error_notification(GArray *table, const uint8_t type)
> }
>
> /*
> + * Generic Error Data Entry
> + * ACPI 6.1: 18.3.2.7.1 Generic Error Data
> + */
> +static void acpi_ghes_generic_error_data(GArray *table, QemuUUID section_type,
> + uint32_t error_severity, uint8_t validation_bits, uint8_t flags,
> + uint32_t error_data_length, QemuUUID fru_id,
> + uint64_t time_stamp)
> +{
> + /* Section Type */
> + g_array_append_vals(table, section_type.data,
> + ARRAY_SIZE(section_type.data));
> +
> + /* Error Severity */
> + build_append_int_noprefix(table, error_severity, 4);
> + /* Revision */
> + build_append_int_noprefix(table, 0x300, 2);
> + /* Validation Bits */
> + build_append_int_noprefix(table, validation_bits, 1);
> + /* Flags */
> + build_append_int_noprefix(table, flags, 1);
> + /* Error Data Length */
> + build_append_int_noprefix(table, error_data_length, 4);
> +
> + /* FRU Id */
> + g_array_append_vals(table, fru_id.data, ARRAY_SIZE(fru_id.data));
> +
> + /* FRU Text */
> + build_append_int_noprefix(table, 0, 20);
> + /* Timestamp */
> + build_append_int_noprefix(table, time_stamp, 8);
> +}
> +
> +/*
> + * Generic Error Status Block
> + * ACPI 6.1: 18.3.2.7.1 Generic Error Data
> + */
> +static void acpi_ghes_generic_error_status(GArray *table, uint32_t block_status,
> + uint32_t raw_data_offset, uint32_t raw_data_length,
> + uint32_t data_length, uint32_t error_severity)
> +{
> + /* Block Status */
> + build_append_int_noprefix(table, block_status, 4);
> + /* Raw Data Offset */
> + build_append_int_noprefix(table, raw_data_offset, 4);
> + /* Raw Data Length */
> + build_append_int_noprefix(table, raw_data_length, 4);
> + /* Data Length */
> + build_append_int_noprefix(table, data_length, 4);
> + /* Error Severity */
> + build_append_int_noprefix(table, error_severity, 4);
> +}
> +
> +/* UEFI 2.6: N.2.5 Memory Error Section */
> +static void acpi_ghes_build_append_mem_cper(GArray *table,
> + uint64_t error_physical_addr)
> +{
> + /*
> + * Memory Error Record
> + */
> +
> + /* Validation Bits */
> + build_append_int_noprefix(table,
> + (1ULL << 14) | /* Type Valid */
> + (1ULL << 1) /* Physical Address Valid */,
> + 8);
> + /* Error Status */
> + build_append_int_noprefix(table, 0, 8);
> + /* Physical Address */
> + build_append_int_noprefix(table, error_physical_addr, 8);
> + /* Skip all the detailed information normally found in such a record */
> + build_append_int_noprefix(table, 0, 48);
> + /* Memory Error Type */
> + build_append_int_noprefix(table, 0 /* Unknown error */, 1);
> + /* Skip all the detailed information normally found in such a record */
> + build_append_int_noprefix(table, 0, 7);
> +}
> +
> +static int acpi_ghes_record_mem_error(uint64_t error_block_address,
> + uint64_t error_physical_addr)
> +{
> + GArray *block;
> + /* Memory Error Section Type */
> + QemuUUID mem_section_id_le = UEFI_CPER_SEC_PLATFORM_MEM;
> + QemuUUID fru_id = {};
add comment /* invalid fru id: UEFI 2.6: ..., table ...
> + uint32_t data_length;
> +
> + block = g_array_new(false, true /* clear */, 1);
> +
> + /* This is the length if adding a new generic error data entry*/
> + data_length = ACPI_GHES_DATA_LENGTH + ACPI_GHES_MEM_CPER_LENGTH;
> +
> + /*
> + * Check whether it will run out of the preallocated memory if adding a new
> + * generic error data entry
> + */
> + if ((data_length + ACPI_GHES_GESB_SIZE) > ACPI_GHES_MAX_RAW_DATA_LENGTH) {
> + error_report("Not enough memory to record new CPER!!!");
> + return -1;
> + }
> +
> + /* Build the new generic error status block header */
> + acpi_ghes_generic_error_status(block, ACPI_GEBS_UNCORRECTABLE,
> + 0, 0, data_length, ACPI_CPER_SEV_RECOVERABLE);
> +
> + /* Build this new generic error data entry header */
> + acpi_ghes_generic_error_data(block, mem_section_id_le,
> + ACPI_CPER_SEV_RECOVERABLE, 0, 0,
> + ACPI_GHES_MEM_CPER_LENGTH, fru_id, 0);
> +
> + /* Build the memory section CPER for above new generic error data entry */
> + acpi_ghes_build_append_mem_cper(block, error_physical_addr);
> +
> + /* Write back above this new generic error data entry to guest memory */
/* Write the generic error data entry into guest memory */
> + cpu_physical_memory_write(error_block_address, block->data, block->len);
> +
> + g_array_free(block, true);
> +
> + return 0;
> +}
> +
> +/*
> * Build table for the hardware error fw_cfg blob.
> * Initialize "etc/hardware_errors" and "etc/hardware_errors_addr" fw_cfg blobs.
> * See docs/specs/acpi_hest_ghes.rst for blobs format.
> @@ -224,3 +380,67 @@ void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
> fw_cfg_add_file_callback(s, ACPI_GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL,
> NULL, &(ags->ghes_addr_le), sizeof(ags->ghes_addr_le), false);
> }
> +
> +int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address)
> +{
> + uint64_t error_block_addr, read_ack_register_addr, read_ack_register = 0;
> + int loop = 0;
> + uint64_t start_addr;
> + bool ret = -1;
> + AcpiGedState *acpi_ged_state;
> + AcpiGhesState *ags;
> +
> + assert(source_id < ACPI_HEST_SRC_ID_RESERVED);
> +
> + acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED,
> + NULL));
> + if (acpi_ged_state) {
> + ags = &acpi_ged_state->ghes_state;
> + } else {
> + error_report("ACPI GED device not found");
> + return -1;
> + }
> +
> + start_addr = le64_to_cpu(ags->ghes_addr_le);
> +
> + if (physical_address) {
> +
> + if (source_id < ACPI_HEST_SRC_ID_RESERVED) {
> + start_addr += source_id * sizeof(uint64_t);
> + }
> +
> + cpu_physical_memory_read(start_addr, &error_block_addr,
> + sizeof(error_block_addr));
> +
> + read_ack_register_addr = start_addr +
> + ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t);
> +retry:
> + cpu_physical_memory_read(read_ack_register_addr,
> + &read_ack_register, sizeof(read_ack_register));
> +
> + /* zero means OSPM does not acknowledge the error */
> + if (!read_ack_register) {
> + if (loop < 3) {
> + usleep(100 * 1000);
> + loop++;
> + goto retry;
it's not doing what commit message says
if message is supposed to be dropped, just drop it without any delay loops
> + } else {
> + error_report("OSPM does not acknowledge previous error,"
> + " so can not record CPER for current error anymore");
> + }
> + } else if (error_block_addr) {
> + read_ack_register = cpu_to_le64(0);
^^^^ pointless "= 0" will do just fine
> + /*
> + * Clear the Read Ack Register, OSPM will write it to 1 when
> + * acknowledge this error.
s/acknowledge/it acknowledges/
> + */
> + cpu_physical_memory_write(read_ack_register_addr,
> + &read_ack_register, sizeof(uint64_t));
> +
> + ret = acpi_ghes_record_mem_error(error_block_addr,
> + physical_address);
> + }
> + }
> +
> + return ret;
> +}
> diff --git a/include/hw/acpi/ghes.h b/include/hw/acpi/ghes.h
> index a6761e6..ab0ae33 100644
> --- a/include/hw/acpi/ghes.h
> +++ b/include/hw/acpi/ghes.h
> @@ -22,6 +22,8 @@
> #ifndef ACPI_GHES_H
> #define ACPI_GHES_H
>
> +#include "hw/acpi/bios-linker-loader.h"
> +
> /*
> * Values for Hardware Error Notification Type field
> */
> @@ -69,4 +71,5 @@ void acpi_build_hest(GArray *table_data, GArray *hardware_error,
> BIOSLinker *linker);
> void acpi_ghes_add_fw_cfg(AcpiGhesState *vms, FWCfgState *s,
> GArray *hardware_errors);
> +int acpi_ghes_record_errors(uint8_t notify, uint64_t error_physical_addr);
> #endif
> diff --git a/include/qemu/uuid.h b/include/qemu/uuid.h
> index 129c45f..b35e294 100644
> --- a/include/qemu/uuid.h
> +++ b/include/qemu/uuid.h
> @@ -34,6 +34,11 @@ typedef struct {
> };
> } QemuUUID;
>
> +#define UUID_LE(a, b, c, d0, d1, d2, d3, d4, d5, d6, d7) \
> + {{{ (a) & 0xff, ((a) >> 8) & 0xff, ((a) >> 16) & 0xff, ((a) >> 24) & 0xff, \
> + (b) & 0xff, ((b) >> 8) & 0xff, (c) & 0xff, ((c) >> 8) & 0xff, \
> + (d0), (d1), (d2), (d3), (d4), (d5), (d6), (d7) } } }
since you are adding generalizing macro, take of NVDIMM_UUID_LE which served as model
> #define UUID_FMT "%02hhx%02hhx%02hhx%02hhx-" \
> "%02hhx%02hhx-%02hhx%02hhx-" \
> "%02hhx%02hhx-" \
