Re: [PATCH v8 7/7] KVM: X86: Add user-space access interface for CET MSRs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 10, 2019 at 01:58:59PM -0800, Sean Christopherson wrote:
> On Fri, Nov 01, 2019 at 04:52:22PM +0800, Yang Weijiang wrote:
> > There're two different places storing Guest CET states, states
> > managed with XSAVES/XRSTORS, as restored/saved
> > in previous patch, can be read/write directly from/to the MSRs.
> > For those stored in VMCS fields, they're access via vmcs_read/
> > vmcs_write.
> > 
> >  
> > +#define CET_MSR_RSVD_BITS_1    0x3
> > +#define CET_MSR_RSVD_BITS_2   (0xF << 6)
> > +
> > +static bool cet_msr_write_allowed(struct kvm_vcpu *vcpu, struct msr_data *msr)
> > +{
> > +	u32 index = msr->index;
> > +	u64 data = msr->data;
> > +	u32 high_word = data >> 32;
> > +
> > +	if ((index == MSR_IA32_U_CET || index == MSR_IA32_S_CET) &&
> > +	    (data & CET_MSR_RSVD_BITS_2))
> > +		return false;
> > +
> > +	if (is_64_bit_mode(vcpu)) {
> > +		if (is_noncanonical_address(data & PAGE_MASK, vcpu))
> 
> I don't think this is correct.  MSRs that contain an address usually only
> fault on a non-canonical value and do the non-canonical check regardless
> of mode.  E.g. VM-Enter's consistency checks on SYSENTER_E{I,S}P only care
> about a canonical address and are not dependent on mode, and SYSENTER
> itself states that bits 63:32 are ignored in 32-bit mode.  I assume the
> same is true here.
The spec. reads like this:  Must be machine canonical when written on
parts that support 64 bit mode. On parts that do not support 64 bit mode, the bits 63:32 are
reserved and must be 0.  

> If that is indeed the case, what about adding these to the common canonical
> check in __kvm_set_msr()?  That'd cut down on the boilerplate here and
> might make it easier to audit KVM's canonical checks.
> 
> > +			return false;
> > +		else if ((index == MSR_IA32_PL0_SSP ||
> > +			  index == MSR_IA32_PL1_SSP ||
> > +			  index == MSR_IA32_PL2_SSP ||
> > +			  index == MSR_IA32_PL3_SSP) &&
> > +			  (data & CET_MSR_RSVD_BITS_1))
> > +			return false;
> > +	} else {
> > +		if (msr->index == MSR_IA32_INT_SSP_TAB)
> > +			return false;
> > +		else if ((index == MSR_IA32_U_CET ||
> > +			  index == MSR_IA32_S_CET ||
> > +			  index == MSR_IA32_PL0_SSP ||
> > +			  index == MSR_IA32_PL1_SSP ||
> > +			  index == MSR_IA32_PL2_SSP ||
> > +			  index == MSR_IA32_PL3_SSP) &&
> > +			  (high_word & ~0ul))
> > +			return false;
> > +	}
> > +
> > +	return true;
> > +}
> 
> This helper seems like overkill, e.g. it's filled with index-specific
> checks, but is called from code that has already switched on the index.
> Open coding the individual checks is likely more readable and would require
> less code, especially if the canonical checks are cleaned up.
>
I'm afraid if the checks are not wrapped in a helper, there're many
repeat checking-code, that's why I'm using a wrapper.

> > +
> > +static bool cet_msr_access_allowed(struct kvm_vcpu *vcpu, struct msr_data *msr)
> > +{
> > +	u64 kvm_xss;
> > +	u32 index = msr->index;
> > +
> > +	if (is_guest_mode(vcpu))
> > +		return false;
> 
> I may have missed this in an earlier discussion, does CET not support
> nesting?
>
I don't want to make CET avaible to nested guest at time being, first to
make it available to L1 guest first. So I need to avoid exposing any CET
CPUID/MSRs to a nested guest.

> > +
> > +	kvm_xss = kvm_supported_xss();
> > +
> > +	switch (index) {
> > +	case MSR_IA32_PL0_SSP ... MSR_IA32_PL3_SSP:
> > +		if (!boot_cpu_has(X86_FEATURE_SHSTK))
> > +			return false;
> > +		if (!msr->host_initiated) {
> > +			if (!guest_cpuid_has(vcpu, X86_FEATURE_SHSTK))
> > +				return false;
> > +		} else {
> 
> This looks wrong, WRMSR from the guest only checks CPUID, it doesn't check
> kvm_xss.
> 
OOPs, I need to add the check, thank you!

> > +			if (index == MSR_IA32_PL3_SSP) {
> > +				if (!(kvm_xss & XFEATURE_MASK_CET_USER))
> > +					return false;
> > +			} else {
> > +				if (!(kvm_xss & XFEATURE_MASK_CET_KERNEL))
> > +					return false;
> > +			}
> > +		}
> > +		break;
> > +	case MSR_IA32_U_CET:
> > +	case MSR_IA32_S_CET:
> 
> Rather than bundle everything in a single access_allowed() helper, it might
> be easier to have separate helpers for each class of MSR.   Except for the
> guest_mode() check, there's no overlap between the classes.
>
Sure, let me double check the code.

> > +		if (!boot_cpu_has(X86_FEATURE_SHSTK) &&
> > +		    !boot_cpu_has(X86_FEATURE_IBT))
> > +			return false;
> > +
> > +		if (!msr->host_initiated) {
> > +			if (!guest_cpuid_has(vcpu, X86_FEATURE_SHSTK) &&
> > +			    !guest_cpuid_has(vcpu, X86_FEATURE_IBT))
> > +				return false;
> > +		} else if (index == MSR_IA32_U_CET &&
> > +			   !(kvm_xss & XFEATURE_MASK_CET_USER))
> 
> Same comment about guest not checking kvm_xss.
>
OK.

> > +			return false;
> > +		break;
> > +	case MSR_IA32_INT_SSP_TAB:
> > +		if (!boot_cpu_has(X86_FEATURE_SHSTK))
> > +			return false;
> > +
> > +		if (!msr->host_initiated &&
> > +		    !guest_cpuid_has(vcpu, X86_FEATURE_SHSTK))
> > +			return false;
> > +		break;
> > +	default:
> > +		return false;
> > +	}
> > +	return true;
> > +}
> >  /*
> >   * Reads an msr value (of 'msr_index') into 'pdata'.
> >   * Returns 0 on success, non-0 otherwise.
> > @@ -1788,6 +1880,26 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
> >  		else
> >  			msr_info->data = vmx->pt_desc.guest.addr_a[index / 2];
> >  		break;
> > +	case MSR_IA32_S_CET:
> > +		if (!cet_msr_access_allowed(vcpu, msr_info))
> > +			return 1;
> > +		msr_info->data = vmcs_readl(GUEST_S_CET);
> > +		break;
> > +	case MSR_IA32_INT_SSP_TAB:
> > +		if (!cet_msr_access_allowed(vcpu, msr_info))
> > +			return 1;
> > +		msr_info->data = vmcs_readl(GUEST_INTR_SSP_TABLE);
> > +		break;
> > +	case MSR_IA32_U_CET:
> > +		if (!cet_msr_access_allowed(vcpu, msr_info))
> > +			return 1;
> > +		rdmsrl(MSR_IA32_U_CET, msr_info->data);
> > +		break;
> > +	case MSR_IA32_PL0_SSP ... MSR_IA32_PL3_SSP:
> > +		if (!cet_msr_access_allowed(vcpu, msr_info))
> > +			return 1;
> > +		rdmsrl(msr_info->index, msr_info->data);
> > +		break;
> >  	case MSR_TSC_AUX:
> >  		if (!msr_info->host_initiated &&
> >  		    !guest_cpuid_has(vcpu, X86_FEATURE_RDTSCP))
> > @@ -2039,6 +2151,34 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
> >  		else
> >  			vmx->pt_desc.guest.addr_a[index / 2] = data;
> >  		break;
> > +	case MSR_IA32_S_CET:
> > +		if (!cet_msr_access_allowed(vcpu, msr_info))
> > +			return 1;
> > +		if (!cet_msr_write_allowed(vcpu, msr_info))
> > +			return 1;
> > +		vmcs_writel(GUEST_S_CET, data);
> > +		break;
> > +	case MSR_IA32_INT_SSP_TAB:
> > +		if (!cet_msr_access_allowed(vcpu, msr_info))
> > +			return 1;
> > +		if (!cet_msr_write_allowed(vcpu, msr_info))
> > +			return 1;
> > +		vmcs_writel(GUEST_INTR_SSP_TABLE, data);
> > +		break;
> > +	case MSR_IA32_U_CET:
> > +		if (!cet_msr_access_allowed(vcpu, msr_info))
> > +			return 1;
> > +		if (!cet_msr_write_allowed(vcpu, msr_info))
> > +			return 1;
> > +		wrmsrl(MSR_IA32_U_CET, data);
> > +		break;
> > +	case MSR_IA32_PL0_SSP ... MSR_IA32_PL3_SSP:
> > +		if (!cet_msr_access_allowed(vcpu, msr_info))
> > +			return 1;
> > +		if (!cet_msr_write_allowed(vcpu, msr_info))
> > +			return 1;
> > +		wrmsrl(msr_info->index, data);
> > +		break;
> >  	case MSR_TSC_AUX:
> >  		if (!msr_info->host_initiated &&
> >  		    !guest_cpuid_has(vcpu, X86_FEATURE_RDTSCP))
> > diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> > index 6275a75d5802..1bbe4550da90 100644
> > --- a/arch/x86/kvm/x86.c
> > +++ b/arch/x86/kvm/x86.c
> > @@ -1143,6 +1143,9 @@ static u32 msrs_to_save[] = {
> >  	MSR_IA32_RTIT_ADDR1_A, MSR_IA32_RTIT_ADDR1_B,
> >  	MSR_IA32_RTIT_ADDR2_A, MSR_IA32_RTIT_ADDR2_B,
> >  	MSR_IA32_RTIT_ADDR3_A, MSR_IA32_RTIT_ADDR3_B,
> > +	MSR_IA32_XSS, MSR_IA32_U_CET, MSR_IA32_S_CET,
> > +	MSR_IA32_PL0_SSP, MSR_IA32_PL1_SSP, MSR_IA32_PL2_SSP,
> > +	MSR_IA32_PL3_SSP, MSR_IA32_INT_SSP_TAB,
> >  };
> >  
> >  static unsigned num_msrs_to_save;
> > -- 
> > 2.17.2
> > 



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux