Re: [PATCH v4] vhost: introduce mdev based hardware backend

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2019/10/31 下午10:01, Tiwei Bie wrote:
This patch introduces a mdev based hardware vhost backend.
This backend is built on top of the same abstraction used
in virtio-mdev and provides a generic vhost interface for
userspace to accelerate the virtio devices in guest.

This backend is implemented as a mdev device driver on top
of the same mdev device ops used in virtio-mdev but using
a different mdev class id, and it will register the device
as a VFIO device for userspace to use. Userspace can setup
the IOMMU with the existing VFIO container/group APIs and
then get the device fd with the device name. After getting
the device fd of this device, userspace can use vhost ioctls
to setup the backend.

Signed-off-by: Tiwei Bie <tiwei.bie@xxxxxxxxx>
---
This patch depends on below series:
https://lkml.org/lkml/2019/10/30/62

v3 -> v4:
- Rebase on top of virtio-mdev series v6;
- Some minor tweaks and improvements;

v2 -> v3:
- Fix the return value (Jason);
- Don't cache unnecessary information in vhost-mdev (Jason);
- Get rid of the memset in open (Jason);
- Add comments for VHOST_SET_MEM_TABLE, ... (Jason);
- Filter out unsupported features in vhost-mdev (Jason);
- Add _GET_DEVICE_ID ioctl (Jason);
- Add _GET_CONFIG/_SET_CONFIG ioctls (Jason);
- Drop _GET_QUEUE_NUM ioctl (Jason);
- Fix the copy-paste errors in _IOW/_IOR usage;
- Some minor fixes and improvements;

v1 -> v2:
- Replace _SET_STATE with _SET_STATUS (MST);
- Check status bits at each step (MST);
- Report the max ring size and max number of queues (MST);
- Add missing MODULE_DEVICE_TABLE (Jason);
- Only support the network backend w/o multiqueue for now;
- Some minor fixes and improvements;
- Rebase on top of virtio-mdev series v4;

RFC v4 -> v1:
- Implement vhost-mdev as a mdev device driver directly and
   connect it to VFIO container/group. (Jason);
- Pass ring addresses as GPAs/IOVAs in vhost-mdev to avoid
   meaningless HVA->GPA translations (Jason);

RFC v3 -> RFC v4:
- Build vhost-mdev on top of the same abstraction used by
   virtio-mdev (Jason);
- Introduce vhost fd and pass VFIO fd via SET_BACKEND ioctl (MST);

RFC v2 -> RFC v3:
- Reuse vhost's ioctls instead of inventing a VFIO regions/irqs
   based vhost protocol on top of vfio-mdev (Jason);

RFC v1 -> RFC v2:
- Introduce a new VFIO device type to build a vhost protocol
   on top of vfio-mdev;

  drivers/vfio/mdev/mdev_core.c    |  20 ++
  drivers/vfio/mdev/mdev_private.h |   1 +
  drivers/vhost/Kconfig            |  12 +
  drivers/vhost/Makefile           |   3 +
  drivers/vhost/mdev.c             | 556 +++++++++++++++++++++++++++++++
  include/linux/mdev.h             |   5 +
  include/uapi/linux/vhost.h       |  18 +
  include/uapi/linux/vhost_types.h |   8 +
  8 files changed, 623 insertions(+)
  create mode 100644 drivers/vhost/mdev.c

diff --git a/drivers/vfio/mdev/mdev_core.c b/drivers/vfio/mdev/mdev_core.c
index 22ca589750d8..109dbac01a8f 100644
--- a/drivers/vfio/mdev/mdev_core.c
+++ b/drivers/vfio/mdev/mdev_core.c
@@ -96,6 +96,26 @@ mdev_get_virtio_ops(struct mdev_device *mdev)
  }
  EXPORT_SYMBOL(mdev_get_virtio_ops);
+/* Specify the vhost device ops for the mdev device, this
+ * must be called during create() callback for vhost mdev device.
+ */
+void mdev_set_vhost_ops(struct mdev_device *mdev,
+			const struct virtio_mdev_device_ops *vhost_ops)
+{
+	mdev_set_class(mdev, MDEV_CLASS_ID_VHOST);
+	mdev->vhost_ops = vhost_ops;
+}
+EXPORT_SYMBOL(mdev_set_vhost_ops);
+
+/* Get the vhost device ops for the mdev device. */
+const struct virtio_mdev_device_ops *
+mdev_get_vhost_ops(struct mdev_device *mdev)
+{
+	WARN_ON(mdev->class_id != MDEV_CLASS_ID_VHOST);
+	return mdev->vhost_ops;
+}
+EXPORT_SYMBOL(mdev_get_vhost_ops);
+
  struct device *mdev_dev(struct mdev_device *mdev)
  {
  	return &mdev->dev;
diff --git a/drivers/vfio/mdev/mdev_private.h b/drivers/vfio/mdev/mdev_private.h
index 7b47890c34e7..5597c846e52f 100644
--- a/drivers/vfio/mdev/mdev_private.h
+++ b/drivers/vfio/mdev/mdev_private.h
@@ -40,6 +40,7 @@ struct mdev_device {
  	union {
  		const struct vfio_mdev_device_ops *vfio_ops;
  		const struct virtio_mdev_device_ops *virtio_ops;
+		const struct virtio_mdev_device_ops *vhost_ops;


Any reason why virtio_ops is not used for vhost here?

Other looks good.

Thanks






[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux