On Mon, Jul 20, 2009 at 09:09:43PM +0200, Hans J. Koch wrote:
> On Mon, Jul 20, 2009 at 10:29:34AM +0300, Michael S. Tsirkin wrote:
> > This adds a generic uio driver that can bind to any PCI device. First
> > user will be virtualization where a qemu userspace process needs to give
> > guest OS access to the device.
> >
> > Interrupts are handled using the Interrupt Disable bit in the PCI command
> > register and Interrupt Status bit in the PCI status register. All devices
> > compliant to PCI 2.3 (circa 2002) and all compliant PCI Express devices should
> > support these bits. Driver detects this support, and won't bind to devices
> > which do not support the Interrupt Disable Bit in the command register.
> >
> > It's expected that more features of interest to virtualization will be
> > added to this driver in the future. Possibilities are: mmap for device
> > resources, MSI/MSI-X, eventfd (to interface with kvm), iommu.
>
> Thanks for adding the docs! Looks alright to me.
>
> Thanks,
> Hans
>
> >
> > Signed-off-by: Michael S. Tsirkin <mst@xxxxxxxxxx>
> > Acked-by: Chris Wright <chrisw@xxxxxxxxxx>
>
> Signed-off-by: Hans J. Koch <hjk@xxxxxxxxxxxxx>
Jesse just acked this patch in a private mail, as well.
Acked-by: Jesse Barnes <jbarnes@xxxxxxxxxxxxxxxx>
> >
> > ---
> > Greg, here's a combined patch including documentation, for upstream inclusion.
> >
> > This is intended to solve the problem in virtualization that shared
> > interrupts do not work with assigned devices. Earlier versions of this
> > patch have circulated on kvm@vger.
> >
> > Changes since v4:
> > - add documentation in Docbook format
> > Changes since v3:
> > - minor driver version fix
> > Changes since v2:
> > - remove irqcontrol: user can enable interrupts by
> > writing command register directly
> > - don't claim resources as we don't support mmap yet,
> > but note the intent to do so in the commit log
> > Changes since v1:
> > - some naming changes
> > - do a single read to get both command and status register
> >
> > Documentation/DocBook/uio-howto.tmpl | 163 ++++++++++++++++++++++++++
> > MAINTAINERS | 8 ++
> > drivers/uio/Kconfig | 10 ++
> > drivers/uio/Makefile | 1 +
> > drivers/uio/uio_pci_generic.c | 207 ++++++++++++++++++++++++++++++++++
> > include/linux/pci_regs.h | 1 +
> > 6 files changed, 390 insertions(+), 0 deletions(-)
> > create mode 100644 drivers/uio/uio_pci_generic.c
> >
> > diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
> > index 8f6e3b2..4d4ce0e 100644
> > --- a/Documentation/DocBook/uio-howto.tmpl
> > +++ b/Documentation/DocBook/uio-howto.tmpl
> > @@ -25,6 +25,10 @@
> > <year>2006-2008</year>
> > <holder>Hans-Jürgen Koch.</holder>
> > </copyright>
> > +<copyright>
> > + <year>2009</year>
> > + <holder>Red Hat Inc, Michael S. Tsirkin (mst@xxxxxxxxxx)</holder>
> > +</copyright>
> >
> > <legalnotice>
> > <para>
> > @@ -42,6 +46,13 @@ GPL version 2.
> >
> > <revhistory>
> > <revision>
> > + <revnumber>0.9</revnumber>
> > + <date>2009-07-16</date>
> > + <authorinitials>mst</authorinitials>
> > + <revremark>Added generic pci driver
> > + </revremark>
> > + </revision>
> > + <revision>
> > <revnumber>0.8</revnumber>
> > <date>2008-12-24</date>
> > <authorinitials>hjk</authorinitials>
> > @@ -809,6 +820,158 @@ framework to set up sysfs files for this region. Simply leave it alone.
> >
> > </chapter>
> >
> > +<chapter id="uio_pci_generic" xreflabel="Using Generic driver for PCI cards">
> > +<?dbhtml filename="uio_pci_generic.html"?>
> > +<title>Generic PCI UIO driver</title>
> > + <para>
> > + The generic driver is a kernel module named uio_pci_generic.
> > + It can work with any device compliant to PCI 2.3 (circa 2002) and
> > + any compliant PCI Express device. Using this, you only need to
> > + write the userspace driver, removing the need to write
> > + a hardware-specific kernel module.
> > + </para>
> > +
> > +<sect1 id="uio_pci_generic_binding">
> > +<title>Making the driver recognize the device</title>
> > + <para>
> > +Since the driver does not declare any device ids, it will not get loaded
> > +automatically and will not automatically bind to any devices, you must load it
> > +and allocate id to the driver yourself. For example:
> > + <programlisting>
> > + modprobe uio_pci_generic
> > + echo "8086 10f5" > /sys/bus/pci/drivers/uio_pci_generic/new_id
> > + </programlisting>
> > + </para>
> > + <para>
> > +If there already is a hardware specific kernel driver for your device, the
> > +generic driver still won't bind to it, in this case if you want to use the
> > +generic driver (why would you?) you'll have to manually unbind the hardware
> > +specific driver and bind the generic driver, like this:
> > + <programlisting>
> > + echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind
> > + echo -n 0000:00:19.0 > /sys/bus/pci/drivers/uio_pci_generic/bind
> > + </programlisting>
> > + </para>
> > + <para>
> > +You can verify that the device has been bound to the driver
> > +by looking for it in sysfs, for example like the following:
> > + <programlisting>
> > + ls -l /sys/bus/pci/devices/0000:00:19.0/driver
> > + </programlisting>
> > +Which if successful should print
> > + <programlisting>
> > + .../0000:00:19.0/driver -> ../../../bus/pci/drivers/uio_pci_generic
> > + </programlisting>
> > +Note that the generic driver will not bind to old PCI 2.2 devices.
> > +If binding the device failed, run the following command:
> > + <programlisting>
> > + dmesg
> > + </programlisting>
> > +and look in the output for failure reasons
> > + </para>
> > +</sect1>
> > +
> > +<sect1 id="uio_pci_generic_internals">
> > +<title>Things to know about uio_pci_generic</title>
> > + <para>
> > +Interrupts are handled using the Interrupt Disable bit in the PCI command
> > +register and Interrupt Status bit in the PCI status register. All devices
> > +compliant to PCI 2.3 (circa 2002) and all compliant PCI Express devices should
> > +support these bits. uio_pci_generic detects this support, and won't bind to
> > +devices which do not support the Interrupt Disable Bit in the command register.
> > + </para>
> > + <para>
> > +On each interrupt, uio_pci_generic sets the Interrupt Disable bit.
> > +This prevents the device from generating further interrupts
> > +until the bit is cleared. The userspace driver should clear this
> > +bit before blocking and waiting for more interrupts.
> > + </para>
> > +</sect1>
> > +<sect1 id="uio_pci_generic_userspace">
> > +<title>Writing userspace driver using uio_pci_generic</title>
> > + <para>
> > +Userspace driver can use pci sysfs interface, or the
> > +libpci libray that wraps it, to talk to the device and to
> > +re-enable interrupts by writing to the command register.
> > + </para>
> > +</sect1>
> > +<sect1 id="uio_pci_generic_example">
> > +<title>Example code using uio_pci_generic</title>
> > + <para>
> > +Here is some sample userspace driver code using uio_pci_generic:
> > +<programlisting>
> > +#include <stdlib.h>
> > +#include <stdio.h>
> > +#include <unistd.h>
> > +#include <sys/types.h>
> > +#include <sys/stat.h>
> > +#include <fcntl.h>
> > +#include <errno.h>
> > +
> > +int main()
> > +{
> > + int uiofd;
> > + int configfd;
> > + int err;
> > + int i;
> > + unsigned icount;
> > + unsigned char command_high;
> > +
> > + uiofd = open("/dev/uio0", O_RDONLY);
> > + if (uiofd < 0) {
> > + perror("uio open:");
> > + return errno;
> > + }
> > + configfd = open("/sys/class/uio/uio0/device/config", O_RDWR);
> > + if (uiofd < 0) {
> > + perror("config open:");
> > + return errno;
> > + }
> > +
> > + /* Read and cache command value */
> > + err = pread(configfd, &command_high, 1, 5);
> > + if (err != 1) {
> > + perror("command config read:");
> > + return errno;
> > + }
> > + command_high &= ~0x4;
> > +
> > + for(i = 0;; ++i) {
> > + /* Print out a message, for debugging. */
> > + if (i == 0)
> > + fprintf(stderr, "Started uio test driver.\n");
> > + else
> > + fprintf(stderr, "Interrupts: %d\n", icount);
> > +
> > + /****************************************/
> > + /* Here we got an interrupt from the
> > + device. Do something to it. */
> > + /****************************************/
> > +
> > + /* Re-enable interrupts. */
> > + err = pwrite(configfd, &command_high, 1, 5);
> > + if (err != 1) {
> > + perror("config write:");
> > + break;
> > + }
> > +
> > + /* Wait for next interrupt. */
> > + err = read(uiofd, &icount, 4);
> > + if (err != 4) {
> > + perror("uio read:");
> > + break;
> > + }
> > +
> > + }
> > + return errno;
> > +}
> > +
> > +</programlisting>
> > + </para>
> > +</sect1>
> > +
> > +</chapter>
> > +
> > <appendix id="app1">
> > <title>Further information</title>
> > <itemizedlist>
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 18c3f0c..39c7207 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -2538,6 +2538,14 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
> > S: Maintained
> > F: include/asm-generic
> >
> > +GENERIC UIO DRIVER FOR PCI DEVICES
> > +P: Michael S. Tsirkin
> > +M: mst@xxxxxxxxxx
> > +L: kvm@xxxxxxxxxxxxxxx
> > +L: linux-kernel@xxxxxxxxxxxxxxx
> > +S: Supported
> > +F: drivers/uio/uio_pci_generic.c
> > +
> > GFS2 FILE SYSTEM
> > P: Steven Whitehouse
> > M: swhiteho@xxxxxxxxxx
> > diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
> > index 7f86534..0f14c8e 100644
> > --- a/drivers/uio/Kconfig
> > +++ b/drivers/uio/Kconfig
> > @@ -89,4 +89,14 @@ config UIO_SERCOS3
> >
> > If you compile this as a module, it will be called uio_sercos3.
> >
> > +config UIO_PCI_GENERIC
> > + tristate "Generic driver for PCI 2.3 and PCI Express cards"
> > + depends on PCI
> > + default n
> > + help
> > + Generic driver that you can bind, dynamically, to any
> > + PCI 2.3 compliant and PCI Express card. It is useful,
> > + primarily, for virtualization scenarios.
> > + If you compile this as a module, it will be called uio_pci_generic.
> > +
> > endif
> > diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
> > index 5c2586d..73b2e75 100644
> > --- a/drivers/uio/Makefile
> > +++ b/drivers/uio/Makefile
> > @@ -5,3 +5,4 @@ obj-$(CONFIG_UIO_PDRV_GENIRQ) += uio_pdrv_genirq.o
> > obj-$(CONFIG_UIO_SMX) += uio_smx.o
> > obj-$(CONFIG_UIO_AEC) += uio_aec.o
> > obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o
> > +obj-$(CONFIG_UIO_PCI_GENERIC) += uio_pci_generic.o
> > diff --git a/drivers/uio/uio_pci_generic.c b/drivers/uio/uio_pci_generic.c
> > new file mode 100644
> > index 0000000..313da35
> > --- /dev/null
> > +++ b/drivers/uio/uio_pci_generic.c
> > @@ -0,0 +1,207 @@
> > +/* uio_pci_generic - generic UIO driver for PCI 2.3 devices
> > + *
> > + * Copyright (C) 2009 Red Hat, Inc.
> > + * Author: Michael S. Tsirkin <mst@xxxxxxxxxx>
> > + *
> > + * This work is licensed under the terms of the GNU GPL, version 2.
> > + *
> > + * Since the driver does not declare any device ids, you must allocate
> > + * id and bind the device to the driver yourself. For example:
> > + *
> > + * # echo "8086 10f5" > /sys/bus/pci/drivers/uio_pci_generic/new_id
> > + * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind
> > + * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/uio_pci_generic/bind
> > + * # ls -l /sys/bus/pci/devices/0000:00:19.0/driver
> > + * .../0000:00:19.0/driver -> ../../../bus/pci/drivers/uio_pci_generic
> > + *
> > + * Driver won't bind to devices which do not support the Interrupt Disable Bit
> > + * in the command register. All devices compliant to PCI 2.3 (circa 2002) and
> > + * all compliant PCI Express devices should support this bit.
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/module.h>
> > +#include <linux/pci.h>
> > +#include <linux/uio_driver.h>
> > +#include <linux/spinlock.h>
> > +
> > +#define DRIVER_VERSION "0.01.0"
> > +#define DRIVER_AUTHOR "Michael S. Tsirkin <mst@xxxxxxxxxx>"
> > +#define DRIVER_DESC "Generic UIO driver for PCI 2.3 devices"
> > +
> > +struct uio_pci_generic_dev {
> > + struct uio_info info;
> > + struct pci_dev *pdev;
> > + spinlock_t lock; /* guards command register accesses */
> > +};
> > +
> > +static inline struct uio_pci_generic_dev *
> > +to_uio_pci_generic_dev(struct uio_info *info)
> > +{
> > + return container_of(info, struct uio_pci_generic_dev, info);
> > +}
> > +
> > +/* Interrupt handler. Read/modify/write the command register to disable
> > + * the interrupt. */
> > +static irqreturn_t irqhandler(int irq, struct uio_info *info)
> > +{
> > + struct uio_pci_generic_dev *gdev = to_uio_pci_generic_dev(info);
> > + struct pci_dev *pdev = gdev->pdev;
> > + irqreturn_t ret = IRQ_NONE;
> > + u32 cmd_status_dword;
> > + u16 origcmd, newcmd, status;
> > +
> > + /* We do a single dword read to retrieve both command and status.
> > + * Document assumptions that make this possible. */
> > + BUILD_BUG_ON(PCI_COMMAND % 4);
> > + BUILD_BUG_ON(PCI_COMMAND + 2 != PCI_STATUS);
> > +
> > + spin_lock_irq(&gdev->lock);
> > + pci_block_user_cfg_access(pdev);
> > +
> > + /* Read both command and status registers in a single 32-bit operation.
> > + * Note: we could cache the value for command and move the status read
> > + * out of the lock if there was a way to get notified of user changes
> > + * to command register through sysfs. Should be good for shared irqs. */
> > + pci_read_config_dword(pdev, PCI_COMMAND, &cmd_status_dword);
> > + origcmd = cmd_status_dword;
> > + status = cmd_status_dword >> 16;
> > +
> > + /* Check interrupt status register to see whether our device
> > + * triggered the interrupt. */
> > + if (!(status & PCI_STATUS_INTERRUPT))
> > + goto done;
> > +
> > + /* We triggered the interrupt, disable it. */
> > + newcmd = origcmd | PCI_COMMAND_INTX_DISABLE;
> > + if (newcmd != origcmd)
> > + pci_write_config_word(pdev, PCI_COMMAND, newcmd);
> > +
> > + /* UIO core will signal the user process. */
> > + ret = IRQ_HANDLED;
> > +done:
> > +
> > + pci_unblock_user_cfg_access(pdev);
> > + spin_unlock_irq(&gdev->lock);
> > + return ret;
> > +}
> > +
> > +/* Verify that the device supports Interrupt Disable bit in command register,
> > + * per PCI 2.3, by flipping this bit and reading it back: this bit was readonly
> > + * in PCI 2.2. */
> > +static int __devinit verify_pci_2_3(struct pci_dev *pdev)
> > +{
> > + u16 orig, new;
> > + int err = 0;
> > +
> > + pci_block_user_cfg_access(pdev);
> > + pci_read_config_word(pdev, PCI_COMMAND, &orig);
> > + pci_write_config_word(pdev, PCI_COMMAND,
> > + orig ^ PCI_COMMAND_INTX_DISABLE);
> > + pci_read_config_word(pdev, PCI_COMMAND, &new);
> > + /* There's no way to protect against
> > + * hardware bugs or detect them reliably, but as long as we know
> > + * what the value should be, let's go ahead and check it. */
> > + if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) {
> > + err = -EBUSY;
> > + dev_err(&pdev->dev, "Command changed from 0x%x to 0x%x: "
> > + "driver or HW bug?\n", orig, new);
> > + goto err;
> > + }
> > + if (!((new ^ orig) & PCI_COMMAND_INTX_DISABLE)) {
> > + dev_warn(&pdev->dev, "Device does not support "
> > + "disabling interrupts: unable to bind.\n");
> > + err = -ENODEV;
> > + goto err;
> > + }
> > + /* Now restore the original value. */
> > + pci_write_config_word(pdev, PCI_COMMAND, orig);
> > +err:
> > + pci_unblock_user_cfg_access(pdev);
> > + return err;
> > +}
> > +
> > +static int __devinit probe(struct pci_dev *pdev,
> > + const struct pci_device_id *id)
> > +{
> > + struct uio_pci_generic_dev *gdev;
> > + int err;
> > +
> > + if (!pdev->irq) {
> > + dev_warn(&pdev->dev, "No IRQ assigned to device: "
> > + "no support for interrupts?\n");
> > + return -ENODEV;
> > + }
> > +
> > + err = pci_enable_device(pdev);
> > + if (err) {
> > + dev_err(&pdev->dev, "%s: pci_enable_device failed: %d\n",
> > + __func__, err);
> > + return err;
> > + }
> > +
> > + err = verify_pci_2_3(pdev);
> > + if (err)
> > + goto err_verify;
> > +
> > + gdev = kzalloc(sizeof(struct uio_pci_generic_dev), GFP_KERNEL);
> > + if (!gdev) {
> > + err = -ENOMEM;
> > + goto err_alloc;
> > + }
> > +
> > + gdev->info.name = "uio_pci_generic";
> > + gdev->info.version = DRIVER_VERSION;
> > + gdev->info.irq = pdev->irq;
> > + gdev->info.irq_flags = IRQF_SHARED;
> > + gdev->info.handler = irqhandler;
> > + gdev->pdev = pdev;
> > + spin_lock_init(&gdev->lock);
> > +
> > + if (uio_register_device(&pdev->dev, &gdev->info))
> > + goto err_register;
> > + pci_set_drvdata(pdev, gdev);
> > +
> > + return 0;
> > +err_register:
> > + kfree(gdev);
> > +err_alloc:
> > +err_verify:
> > + pci_disable_device(pdev);
> > + return err;
> > +}
> > +
> > +static void remove(struct pci_dev *pdev)
> > +{
> > + struct uio_pci_generic_dev *gdev = pci_get_drvdata(pdev);
> > +
> > + uio_unregister_device(&gdev->info);
> > + pci_disable_device(pdev);
> > + kfree(gdev);
> > +}
> > +
> > +static struct pci_driver driver = {
> > + .name = "uio_pci_generic",
> > + .id_table = NULL, /* only dynamic id's */
> > + .probe = probe,
> > + .remove = remove,
> > +};
> > +
> > +static int __init init(void)
> > +{
> > + pr_info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
> > + return pci_register_driver(&driver);
> > +}
> > +
> > +static void __exit cleanup(void)
> > +{
> > + pci_unregister_driver(&driver);
> > +}
> > +
> > +module_init(init);
> > +module_exit(cleanup);
> > +
> > +MODULE_VERSION(DRIVER_VERSION);
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_AUTHOR(DRIVER_AUTHOR);
> > +MODULE_DESCRIPTION(DRIVER_DESC);
> > diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
> > index fcaee42..dd0bed4 100644
> > --- a/include/linux/pci_regs.h
> > +++ b/include/linux/pci_regs.h
> > @@ -42,6 +42,7 @@
> > #define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
> >
> > #define PCI_STATUS 0x06 /* 16 bits */
> > +#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */
> > #define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
> > #define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */
> > #define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */
> > --
> > 1.6.2.5
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
