-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! Until today I was using OpenBSD 4.5 like KVM virtual machine on Ubuntu Hardy Heron server amd64 with KVM-62. But due to a bug that could affect to hosts with a high rate of I/O [1], I decided to update to KVM-88 compiled from sources from KVM site. Although with the other virtual machines that it had in the host I did not have problems, I have now some problems with the installation of OpenBSD on KVM-88 Next I paste the output when connecting to the VM by means of serial console from the host machine. After 'mtrr: Pentium Pro MTRR support', I see an 'u' followed sometimes by an 'k', and the operating system is rebooted repetitively when arriving at this instance. - --------------------------------------------------------------------------- root@ubuntu:/etc/modprobe.d# telnet localhost 4001 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. >> OpenBSD/i386 BOOT 3.02 boot> booting hd0a:/bsd: 6039964+1059784 [52+336688+318896]=0x7657ec entry point at 0x200120 [ using 656008 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2009 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009 deraadt@xxxxxxxxxxxxxxxx:/usr/src/sys/arch/i386/compile/GENERIC cpu0: QEMU Virtual CPU version 0.9.1 ("AuthenticAMD" 686-class, 512KB L2 cache) 1.71 GHz cpu0: FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3 real mem = 536375296 (511MB) avail mem = 510361600 (486MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 07/08/09, BIOS32 rev. 0 @ 0xfb4d0, SMBIOS rev. 2.4 @ 0xfbd3f (10 entries) bios0: vendor QEMU version "QEMU" date 01/01/2007 acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC acpi0: wakeup devices acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat acpiprt0 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0 mpbios0 at bios0: Intel MP Specification 1.4 cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 1000MHz mpbios0: bus 0 is type ISA ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 bios0: ROM list: 0xc0000/0x8c00 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02 pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00 pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to compatibility, channel 1 wired to comp wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK> wd0: 16-sector PIO, LBA48, 38912MB, 79691776 sectors wd0(pciide0:0:0): using PIO mode 0, DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.9.> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO mode 0 piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 1 int 4 (irq 10) iic0 at piixpm0 iic0: addr 0x18 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0 words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 0 iic0: addr 0x1a 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0 words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 0 iic0: addr 0x4c 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0 words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 0 iic0: addr 0x4e 00=d0 01=d0 02=d0 03=d0 04=d0 05=d0 06=d0 07=d0 08=d0 words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 0 vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ne3 at pci0 dev 3 function 0 "Realtek 8029" rev 0x00: apic 1 int 12 (irq 11), address 00:16:3e:00:00:35 unknown vendor 0x1af4 product 0x1002 (class memory subclass RAM, rev 0x00) at pci0 dev 4 function 0 not configured unknown vendor 0x1af4 product 0x1003 (class prehistoric unknown subclass 0xff, rev 0x00) at pci0 dev 5 function 0 not configu isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pmsi0 at pckbc0 (aux slot) pckbc0: unable to establish interrupt for aux slot wsmouse0 at pmsi0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: density unknown fd1 at fdc0 drive 1: density unknown mtrr: Pentium Pro MTRR support u>> OpenBSD/i386 BOOT 3.02 boot> booting hd0a:/bsd: 6039964+1059784 [52+336688+318896]=0x7657ec entry point at 0x200120 - --------------------------------------------------------------------------- If I start the VM with the --no-acpi option, OpenBSD boots without problems, but I obtain timeouts of the network interface and this host loses the connectivity with the rest of the network maintaining the option model=ne2k_pci (same configuration used for KVM-62) when start the VM. Some idea of which can be the problem? Thanks in advance. Regards, Daniel [1] https://bugs.launchpad.net/ubuntu/+source/kvm/+bug/359447 - -- Fingerprint: BFB3 08D6 B4D1 31B2 72B9 29CE 6696 BF1B 14E6 1D37 Powered by Debian GNU/Linux Squeeze - Linux user #188.598 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAkpg228ACgkQZpa/GxTmHTeBawCdFL9Sj4+JomzRv1ulqqpw46JV MucAnixZ1IIkkZNs/+je0CZ+hxuzqJaf =4mxY -----END PGP SIGNATURE----- -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
