RE: [PATCH V2 6/8] mdev: introduce virtio device and its device ops

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: Jason Wang [mailto:jasowang@xxxxxxxxxx]
> Sent: Tuesday, September 24, 2019 9:54 PM
> 
> This patch implements basic support for mdev driver that supports
> virtio transport for kernel virtio driver.
> 
> Signed-off-by: Jason Wang <jasowang@xxxxxxxxxx>
> ---
>  include/linux/mdev.h        |   2 +
>  include/linux/virtio_mdev.h | 145
> ++++++++++++++++++++++++++++++++++++
>  2 files changed, 147 insertions(+)
>  create mode 100644 include/linux/virtio_mdev.h
> 
> diff --git a/include/linux/mdev.h b/include/linux/mdev.h
> index 3414307311f1..73ac27b3b868 100644
> --- a/include/linux/mdev.h
> +++ b/include/linux/mdev.h
> @@ -126,6 +126,8 @@ struct mdev_device *mdev_from_dev(struct device
> *dev);
> 
>  enum {
>  	MDEV_ID_VFIO = 1,
> +	MDEV_ID_VIRTIO = 2,
> +	MDEV_ID_VHOST = 3,
>  	/* New entries must be added here */
>  };
> 
> diff --git a/include/linux/virtio_mdev.h b/include/linux/virtio_mdev.h
> new file mode 100644
> index 000000000000..d1a40a739266
> --- /dev/null
> +++ b/include/linux/virtio_mdev.h
> @@ -0,0 +1,145 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Virtio mediated device driver
> + *
> + * Copyright 2019, Red Hat Corp.
> + *     Author: Jason Wang <jasowang@xxxxxxxxxx>
> + */
> +#ifndef _LINUX_VIRTIO_MDEV_H
> +#define _LINUX_VIRTIO_MDEV_H
> +
> +#include <linux/interrupt.h>
> +#include <linux/mdev.h>
> +#include <uapi/linux/vhost.h>
> +
> +#define VIRTIO_MDEV_DEVICE_API_STRING		"virtio-mdev"
> +#define VIRTIO_MDEV_VERSION 0x1

Just be curious. is this version identical to virtio spec version that below
callbacks are created for, or just irrelevant?

> +
> +struct virtio_mdev_callback {
> +	irqreturn_t (*callback)(void *data);
> +	void *private;
> +};
> +
> +/**
> + * struct vfio_mdev_device_ops - Structure to be registered for each
> + * mdev device to register the device to virtio-mdev module.
> + *
> + * @set_vq_address:		Set the address of virtqueue
> + *				@mdev: mediated device
> + *				@idx: virtqueue index
> + *				@desc_area: address of desc area
> + *				@driver_area: address of driver area
> + *				@device_area: address of device area
> + *				Returns integer: success (0) or error (< 0)
> + * @set_vq_num:		Set the size of virtqueue
> + *				@mdev: mediated device
> + *				@idx: virtqueue index
> + *				@num: the size of virtqueue
> + * @kick_vq:			Kick the virtqueue
> + *				@mdev: mediated device
> + *				@idx: virtqueue index
> + * @set_vq_cb:			Set the interrut calback function for
> + *				a virtqueue
> + *				@mdev: mediated device
> + *				@idx: virtqueue index
> + *				@cb: virtio-mdev interrupt callback
> structure
> + * @set_vq_ready:		Set ready status for a virtqueue
> + *				@mdev: mediated device
> + *				@idx: virtqueue index
> + *				@ready: ready (true) not ready(false)
> + * @get_vq_ready:		Get ready status for a virtqueue
> + *				@mdev: mediated device
> + *				@idx: virtqueue index
> + *				Returns boolean: ready (true) or not (false)
> + * @set_vq_state:		Set the state for a virtqueue
> + *				@mdev: mediated device
> + *				@idx: virtqueue index
> + *				@state: virtqueue state (last_avail_idx)
> + *				Returns integer: success (0) or error (< 0)
> + * @get_vq_state:		Get the state for a virtqueue
> + *				@mdev: mediated device
> + *				@idx: virtqueue index
> + *				Returns virtqueue state (last_avail_idx)
> + * @get_vq_align:		Get the virtqueue align requirement
> + *				for the device
> + *				@mdev: mediated device
> + *				Returns virtqueue algin requirement
> + * @get_features:		Get virtio features supported by the device
> + *				@mdev: mediated device
> + *				Returns the features support by the
> + *				device
> + * @get_features:		Set virtio features supported by the driver
> + *				@mdev: mediated device
> + *				@features: feature support by the driver
> + *				Returns integer: success (0) or error (< 0)
> + * @set_config_cb:		Set the config interrupt callback
> + *				@mdev: mediated device
> + *				@cb: virtio-mdev interrupt callback
> structure
> + * @get_device_id:		Get virtio device id
> + *				@mdev: mediated device
> + *				Returns u32: virtio device id
> + * @get_vendor_id:		Get virtio vendor id
> + *				@mdev: mediated device
> + *				Returns u32: virtio vendor id
> + * @get_status:		Get the device status
> + *				@mdev: mediated device
> + *				Returns u8: virtio device status
> + * @set_status:		Set the device status
> + *				@mdev: mediated device
> + *				@status: virtio device status
> + * @get_config:		Read from device specific confiugration
> space

configuration (and similar typos downward)

> + *				@mdev: mediated device
> + *				@offset: offset from the beginning of
> + *				configuration space
> + *				@buf: buffer used to read to
> + *				@len: the length to read from
> + *				configration space
> + * @set_config:		Write to device specific confiugration space
> + *				@mdev: mediated device
> + *				@offset: offset from the beginning of
> + *				configuration space
> + *				@buf: buffer used to write from
> + *				@len: the length to write to
> + *				configration space
> + * @get_version:		Get the version of virtio mdev device
> + *				@mdev: mediated device
> + *				Returns integer: version of the device
> + * @get_generation:		Get device generaton
> + *				@mdev: mediated device
> + *				Returns u32: device generation
> + */
> +struct virtio_mdev_device_ops {
> +	/* Virtqueue ops */
> +	int (*set_vq_address)(struct mdev_device *mdev,
> +			      u16 idx, u64 desc_area, u64 driver_area,
> +			      u64 device_area);
> +	void (*set_vq_num)(struct mdev_device *mdev, u16 idx, u32 num);
> +	void (*kick_vq)(struct mdev_device *mdev, u16 idx);
> +	void (*set_vq_cb)(struct mdev_device *mdev, u16 idx,
> +			  struct virtio_mdev_callback *cb);
> +	void (*set_vq_ready)(struct mdev_device *mdev, u16 idx, bool
> ready);
> +	bool (*get_vq_ready)(struct mdev_device *mdev, u16 idx);
> +	int (*set_vq_state)(struct mdev_device *mdev, u16 idx, u64 state);
> +	u64 (*get_vq_state)(struct mdev_device *mdev, u16 idx);
> +
> +	/* Device ops */
> +	u16 (*get_vq_align)(struct mdev_device *mdev);
> +	u64 (*get_features)(struct mdev_device *mdev);
> +	int (*set_features)(struct mdev_device *mdev, u64 features);
> +	void (*set_config_cb)(struct mdev_device *mdev,
> +			      struct virtio_mdev_callback *cb);
> +	u16 (*get_queue_max)(struct mdev_device *mdev);
> +	u32 (*get_device_id)(struct mdev_device *mdev);
> +	u32 (*get_vendor_id)(struct mdev_device *mdev);
> +	u8 (*get_status)(struct mdev_device *mdev);
> +	void (*set_status)(struct mdev_device *mdev, u8 status);
> +	void (*get_config)(struct mdev_device *mdev, unsigned int offset,
> +			   void *buf, unsigned int len);
> +	void (*set_config)(struct mdev_device *mdev, unsigned int offset,
> +			   const void *buf, unsigned int len);
> +	int (*get_version)(struct mdev_device *mdev);
> +	u32 (*get_generation)(struct mdev_device *mdev);
> +};

I'm not sure how stable above ops are. Does it make sense if defining
just two callbacks here, e.g. vq_ctrl and device_ctrl, and then let the
vendor driver to handle specific ops in each category (similar to how
ioctl works)?

Thanks
Kevin




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux