On Fri, 6 Sep 2019 at 09:33, Xiang Zheng <zhengxiang9@xxxxxxxxxx> wrote: > > From: Dongjiu Geng <gengdongjiu@xxxxxxxxxx> > > Add APEI/GHES detailed design document > > Signed-off-by: Dongjiu Geng <gengdongjiu@xxxxxxxxxx> > Signed-off-by: Xiang Zheng <zhengxiang9@xxxxxxxxxx> > --- > docs/specs/acpi_hest_ghes.txt | 88 +++++++++++++++++++++++++++++++++++ > 1 file changed, 88 insertions(+) > create mode 100644 docs/specs/acpi_hest_ghes.txt Hi; new documentation in docs/specs should be in rst format and listed in the contents page for the manual at docs/specs/index.rst, please. Conversion from plain text should hopefully be fairly straightforward. I've also provided some minor typo/grammar fixes below. > diff --git a/docs/specs/acpi_hest_ghes.txt b/docs/specs/acpi_hest_ghes.txt > new file mode 100644 > index 0000000000..690d4b2bd0 > --- /dev/null > +++ b/docs/specs/acpi_hest_ghes.txt > @@ -0,0 +1,88 @@ > +APEI tables generating and CPER record > +============================= > + > +Copyright (C) 2019 Huawei Corporation. > + > +Design Details: > +------------------- > + > + etc/acpi/tables etc/hardware_errors > + ==================== ========================================== > ++ +--------------------------+ +-----------------------+ > +| | HEST | | address | +--------------+ > +| +--------------------------+ | registers | | Error Status | > +| | GHES1 | | +---------------------+ | Data Block 1 | > +| +--------------------------+ +--------->| |error_block_address1 |----------->| +------------+ > +| | ................. | | | +---------------------+ | | CPER | > +| | error_status_address-----+-+ +------->| |error_block_address2 |--------+ | | CPER | > +| | ................. | | | +---------------------+ | | | .... | > +| | read_ack_register--------+-+ | | | .............. | | | | CPER | > +| | read_ack_preserve | | | +-----------------------+ | | +------------+ > +| | read_ack_write | | | +----->| |error_block_addressN |------+ | | Error Status | > ++ +--------------------------+ | | | | +---------------------+ | | | Data Block 2 | > +| | GHES2 | +-+-+----->| |read_ack_register1 | | +-->| +------------+ > ++ +--------------------------+ | | | +---------------------+ | | | CPER | > +| | ................. | | | +--->| |read_ack_register2 | | | | CPER | > +| | error_status_address-----+---+ | | | +---------------------+ | | | .... | > +| | ................. | | | | | ............. | | | | CPER | > +| | read_ack_register--------+-----+-+ | +---------------------+ | +-+------------+ > +| | read_ack_preserve | | +->| |read_ack_registerN | | | |.......... | > +| | read_ack_write | | | | +---------------------+ | | +------------+ > ++ +--------------------------| | | | | Error Status | > +| | ............... | | | | | Data Block N | > ++ +--------------------------+ | | +---->| +------------+ > +| | GHESN | | | | | CPER | > ++ +--------------------------+ | | | | CPER | > +| | ................. | | | | | .... | > +| | error_status_address-----+-----+ | | | CPER | > +| | ................. | | +-+------------+ > +| | read_ack_register--------+---------+ > +| | read_ack_preserve | > +| | read_ack_write | > ++ +--------------------------+ > + > +(1) QEMU generates the ACPI HEST table. This table goes in the current > + "etc/acpi/tables" fw_cfg blob. Each error source has different > + notification types. > + > +(2) A new fw_cfg blob called "etc/hardware_errors" is introduced. QEMU > + also need to populate this blob. The "etc/hardwre_errors" fw_cfg blob "needs". "hardware_errors". > + contains an address registers table and an Error Status Data Block table. > + > +(3) The address registers table contains N Error Block Address entries > + and N Read Ack Register entries, the size for each entry is 8-byte. ". The size". > + The Error Status Data Block table contains N Error Status Data Block > + entries, the size for each entry is 4096(0x1000) bytes. The total size ". The size" > + for "etc/hardware_errors" fw_cfg blob is (N * 8 * 2 + N * 4096) bytes. "for the" > + N is the kinds of hardware error sources. Not sure what you had in mind here. Possibly either "N is the number of kinds of hardware error sources" or "N is the number of hardware error sources" ? > + > +(4) QEMU generates the ACPI linker/loader script for the firmware, the ". The" > + firmware pre-allocates memory for "etc/acpi/tables", "etc/hardware_errors" > + and copies blobs content there. "blob contents" > + > +(5) QEMU generates N ADD_POINTER commands, which patch address in the "addresses" > + "error_status_address" fields of the HEST table with a pointer to the > + corresponding "address registers" in "etc/hardware_errors" blob. "in the" > + > +(6) QEMU generates N ADD_POINTER commands, which patch address in the "addresses" > + "read_ack_register" fields of the HEST table with a pointer to the > + corresponding "address registers" in "etc/hardware_errors" blob. "in the" > + > +(7) QEMU generates N ADD_POINTER commands for the firmware, which patch > + address in the " error_block_address" fields with a pointer to the "addresses". Stray extra space after open-quote. > + respective "Error Status Data Block" in "etc/hardware_errors" blob. "in the" > + > +(8) QEMU defines a third and write-only fw_cfg blob which is called > + "etc/hardware_errors_addr". Through that blob, the firmware can send back > + the guest-side allocation addresses to QEMU. The "etc/hardware_errors_addr" > + blob contains a 8-byte entry. QEMU generates a single WRITE_POINTER commands "command" > + for the firmware, the firmware will write back the start address of ". The" > + "etc/hardware_errors" blob to fw_cfg file "etc/hardware_errors_addr". "to the fw_cfg file" > + > +(9) When QEMU gets SIGBUS from the kernel, QEMU formats the CPER right into "a SIGBUS" > + guest memory, and then injects whatever interrupt (or assert whatever GPIO "or asserts" > + line) as a notification which is necessary for notifying the guest. > + > +(10) This notification (in virtual hardware) will be handled by guest kernel, "the guest kernel" > + guest APEI driver will read the CPER which is recorded by QEMU and do the "and the guest APEI driver" > + recovery. thanks -- PMM
