This series adds initial KVM RISC-V support. Currently, we are able to boot RISC-V 64bit Linux Guests with multiple VCPUs. Few key aspects of KVM RISC-V added by this series are: 1. Minimal possible KVM world-switch which touches only GPRs and few CSRs. 2. Full Guest/VM switch is done via vcpu_get/vcpu_put infrastructure. 3. KVM ONE_REG interface for VCPU register access from user-space. 4. PLIC emulation is done in user-space. 5. Timer and IPI emuation is done in-kernel. 6. MMU notifiers supported. 7. FP lazy save/restore supported. 8. SBI v0.1 emulation for KVM Guest available. Here's a brief TODO list which we will work upon after this series: 1. Implement recursive stage2 page table programing 2. SBI v0.2 emulation in-kernel 3. SBI v0.2 hart hotplug emulation in-kernel 4. In-kernel PLIC emulation 5. ..... and more ..... This series can be found in riscv_kvm_v7 branch at: https//github.com/avpatel/linux.git Our work-in-progress KVMTOOL RISC-V port can be found in riscv_v1 branch at: https//github.com/avpatel/kvmtool.git We need OpenSBI with RISC-V hypervisor extension support which can be found in hyp_ext_changes_v1 branch at: https://github.com/riscv/opensbi.git The QEMU RISC-V hypervisor emulation is done by Alistair and is available in riscv-hyp-work.next branch at: https://github.com/alistair23/qemu.git To play around with KVM RISC-V, refer KVM RISC-V wiki at: https://github.com/kvm-riscv/howto/wiki https://github.com/kvm-riscv/howto/wiki/KVM-RISCV64-on-QEMU Changes since v6: - Rebased patches on Linux-5.3-rc7 - Added "return_handled" in struct kvm_mmio_decode to ensure that kvm_riscv_vcpu_mmio_return() updates SEPC only once - Removed trap_stval parameter from kvm_riscv_vcpu_unpriv_read() - Updated git repo URL in MAINTAINERS entry Changes since v5: - Renamed KVM_REG_RISCV_CONFIG_TIMEBASE register to KVM_REG_RISCV_CONFIG_TBFREQ register in ONE_REG interface - Update SPEC in kvm_riscv_vcpu_mmio_return() for MMIO exits - Use switch case instead of illegal instruction opcode table for simplicity - Improve comments in stage2_remote_tlb_flush() for a potential remote TLB flush optimization - Handle all unsupported SBI calls in default case of kvm_riscv_vcpu_sbi_ecall() function - Fixed kvm_riscv_vcpu_sync_interrupts() for software interrupts - Improved unprivilege reads to handle traps due to Guest stage1 page table - Added separate patch to document RISC-V specific things in Documentation/virt/kvm/api.txt Changes since v4: - Rebased patches on Linux-5.3-rc5 - Added Paolo's Acked-by and Reviewed-by - Updated mailing list in MAINTAINERS entry Changes since v3: - Moved patch for ISA bitmap from KVM prep series to this series - Make vsip_shadow as run-time percpu variable instead of compile-time - Flush Guest TLBs on all Host CPUs whenever we run-out of VMIDs Changes since v2: - Removed references of KVM_REQ_IRQ_PENDING from all patches - Use kvm->srcu within in-kernel KVM run loop - Added percpu vsip_shadow to track last value programmed in VSIP CSR - Added comments about irqs_pending and irqs_pending_mask - Used kvm_arch_vcpu_runnable() in-place-of kvm_riscv_vcpu_has_interrupt() in system_opcode_insn() - Removed unwanted smp_wmb() in kvm_riscv_stage2_vmid_update() - Use kvm_flush_remote_tlbs() in kvm_riscv_stage2_vmid_update() - Use READ_ONCE() in kvm_riscv_stage2_update_hgatp() for vmid Changes since v1: - Fixed compile errors in building KVM RISC-V as module - Removed unused kvm_riscv_halt_guest() and kvm_riscv_resume_guest() - Set KVM_CAP_SYNC_MMU capability only after MMU notifiers are implemented - Made vmid_version as unsigned long instead of atomic - Renamed KVM_REQ_UPDATE_PGTBL to KVM_REQ_UPDATE_HGATP - Renamed kvm_riscv_stage2_update_pgtbl() to kvm_riscv_stage2_update_hgatp() - Configure HIDELEG and HEDELEG in kvm_arch_hardware_enable() - Updated ONE_REG interface for CSR access to user-space - Removed irqs_pending_lock and use atomic bitops instead - Added separate patch for FP ONE_REG interface - Added separate patch for updating MAINTAINERS file Anup Patel (16): KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface RISC-V: Add bitmap reprensenting ISA features common across CPUs RISC-V: Add hypervisor extension related CSR defines RISC-V: Add initial skeletal KVM support RISC-V: KVM: Implement VCPU create, init and destroy functions RISC-V: KVM: Implement VCPU interrupts and requests handling RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls RISC-V: KVM: Implement VCPU world-switch RISC-V: KVM: Handle MMIO exits for VCPU RISC-V: KVM: Handle WFI exits for VCPU RISC-V: KVM: Implement VMID allocator RISC-V: KVM: Implement stage2 page table programming RISC-V: KVM: Implement MMU notifiers RISC-V: KVM: Document RISC-V specific parts of KVM API. RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig RISC-V: KVM: Add MAINTAINERS entry Atish Patra (5): RISC-V: Export few kernel symbols RISC-V: KVM: Add timer functionality RISC-V: KVM: FP lazy save/restore RISC-V: KVM: Implement ONE REG interface for FP registers RISC-V: KVM: Add SBI v0.1 support Documentation/virt/kvm/api.txt | 141 +++- MAINTAINERS | 10 + arch/riscv/Kconfig | 2 + arch/riscv/Makefile | 2 + arch/riscv/configs/defconfig | 11 + arch/riscv/configs/rv32_defconfig | 11 + arch/riscv/include/asm/csr.h | 58 ++ arch/riscv/include/asm/hwcap.h | 26 + arch/riscv/include/asm/kvm_host.h | 255 ++++++ arch/riscv/include/asm/kvm_vcpu_timer.h | 30 + arch/riscv/include/asm/pgtable-bits.h | 1 + arch/riscv/include/uapi/asm/kvm.h | 104 +++ arch/riscv/kernel/asm-offsets.c | 148 ++++ arch/riscv/kernel/cpufeature.c | 79 +- arch/riscv/kernel/smp.c | 2 +- arch/riscv/kernel/time.c | 1 + arch/riscv/kvm/Kconfig | 34 + arch/riscv/kvm/Makefile | 14 + arch/riscv/kvm/main.c | 92 +++ arch/riscv/kvm/mmu.c | 911 +++++++++++++++++++++ arch/riscv/kvm/tlb.S | 43 + arch/riscv/kvm/vcpu.c | 998 ++++++++++++++++++++++++ arch/riscv/kvm/vcpu_exit.c | 616 +++++++++++++++ arch/riscv/kvm/vcpu_sbi.c | 104 +++ arch/riscv/kvm/vcpu_switch.S | 376 +++++++++ arch/riscv/kvm/vcpu_timer.c | 113 +++ arch/riscv/kvm/vm.c | 86 ++ arch/riscv/kvm/vmid.c | 123 +++ drivers/clocksource/timer-riscv.c | 8 + include/clocksource/timer-riscv.h | 16 + include/uapi/linux/kvm.h | 1 + 31 files changed, 4405 insertions(+), 11 deletions(-) create mode 100644 arch/riscv/include/asm/kvm_host.h create mode 100644 arch/riscv/include/asm/kvm_vcpu_timer.h create mode 100644 arch/riscv/include/uapi/asm/kvm.h create mode 100644 arch/riscv/kvm/Kconfig create mode 100644 arch/riscv/kvm/Makefile create mode 100644 arch/riscv/kvm/main.c create mode 100644 arch/riscv/kvm/mmu.c create mode 100644 arch/riscv/kvm/tlb.S create mode 100644 arch/riscv/kvm/vcpu.c create mode 100644 arch/riscv/kvm/vcpu_exit.c create mode 100644 arch/riscv/kvm/vcpu_sbi.c create mode 100644 arch/riscv/kvm/vcpu_switch.S create mode 100644 arch/riscv/kvm/vcpu_timer.c create mode 100644 arch/riscv/kvm/vm.c create mode 100644 arch/riscv/kvm/vmid.c create mode 100644 include/clocksource/timer-riscv.h -- 2.17.1
