On 29/07/19 13:56, Anup Patel wrote: > This series adds initial KVM RISC-V support. Currently, we are able to boot > RISC-V 64bit Linux Guests with multiple VCPUs. > > Few key aspects of KVM RISC-V added by this series are: > 1. Minimal possible KVM world-switch which touches only GPRs and few CSRs. > 2. Full Guest/VM switch is done via vcpu_get/vcpu_put infrastructure. > 3. KVM ONE_REG interface for VCPU register access from user-space. > 4. PLIC emulation is done in user-space. In-kernel PLIC emulation, will > be added in future. > 5. Timer and IPI emuation is done in-kernel. > 6. MMU notifiers supported. > 7. FP lazy save/restore supported. > 8. SBI v0.1 emulation for KVM Guest available. > > More feature additions and enhancments will follow after this series and > eventually KVM RISC-V will be at-par with other architectures. This looks clean and it shouldn't take long to have it merged. Please sort out the MAINTAINERS additions. It would also be nice if tools/testing/selftests/kvm/ worked with RISC-V from the beginning; there have been recent ARM and s390 ports that you can take some inspiration from. Paolo > This series is based upon KVM pre-patches sent by Atish earlier > (https://lkml.org/lkml/2019/7/26/1271) and it can be found in > riscv_kvm_v1 branch at: > https//github.com/avpatel/linux.git > > Our work-in-progress KVMTOOL RISC-V port can be found in riscv_v1 branch at: > https//github.com/avpatel/kvmtool.git > > We need OpenSBI with RISC-V hypervisor extension support which can be > found in hyp_ext_changes_v1 branch at: > https://github.com/riscv/opensbi.git > > The QEMU RISC-V hypervisor emulation is done by Alistair and is available > in riscv-hyp-work.next branch at: > https://github.com/alistair23/qemu.git > > To play around with KVM RISC-V, here are few reference commands: > 1) To cross-compile KVMTOOL: > $ make lkvm-static > 2) To launch RISC-V Host Linux: > $ qemu-system-riscv64 -monitor null -cpu rv64,h=true -M virt \ > -m 512M -display none -serial mon:stdio \ > -kernel opensbi/build/platform/qemu/virt/firmware/fw_jump.elf \ > -device loader,file=build-riscv64/arch/riscv/boot/Image,addr=0x80200000 \ > -initrd ./rootfs_kvm_riscv64.img \ > -append "root=/dev/ram rw console=ttyS0 earlycon=sbi" > 3) To launch RISC-V Guest Linux with 9P rootfs: > $ ./apps/lkvm-static run -m 128 -c2 --console serial \ > -p "console=ttyS0 earlycon=uart8250,mmio,0x3f8" -k ./apps/Image --debug > 4) To launch RISC-V Guest Linux with initrd: > $ ./apps/lkvm-static run -m 128 -c2 --console serial \ > -p "console=ttyS0 earlycon=uart8250,mmio,0x3f8" -k ./apps/Image \ > -i ./apps/rootfs.img --debug > > Anup Patel (13): > KVM: RISC-V: Add KVM_REG_RISCV for ONE_REG interface > RISC-V: Add hypervisor extension related CSR defines > RISC-V: Add initial skeletal KVM support > RISC-V: KVM: Implement VCPU create, init and destroy functions > RISC-V: KVM: Implement VCPU interrupts and requests handling > RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls > RISC-V: KVM: Implement VCPU world-switch > RISC-V: KVM: Handle MMIO exits for VCPU > RISC-V: KVM: Handle WFI exits for VCPU > RISC-V: KVM: Implement VMID allocator > RISC-V: KVM: Implement stage2 page table programming > RISC-V: KVM: Implement MMU notifiers > RISC-V: Enable VIRTIO drivers in RV64 and RV32 defconfig > > Atish Patra (3): > RISC-V: KVM: Add timer functionality > RISC-V: KVM: FP lazy save/restore > RISC-V: KVM: Add SBI v0.1 support > > arch/riscv/Kconfig | 2 + > arch/riscv/Makefile | 2 + > arch/riscv/configs/defconfig | 23 +- > arch/riscv/configs/rv32_defconfig | 13 + > arch/riscv/include/asm/csr.h | 58 ++ > arch/riscv/include/asm/kvm_host.h | 232 ++++++ > arch/riscv/include/asm/kvm_vcpu_timer.h | 32 + > arch/riscv/include/asm/pgtable-bits.h | 1 + > arch/riscv/include/uapi/asm/kvm.h | 74 ++ > arch/riscv/kernel/asm-offsets.c | 148 ++++ > arch/riscv/kvm/Kconfig | 34 + > arch/riscv/kvm/Makefile | 14 + > arch/riscv/kvm/main.c | 64 ++ > arch/riscv/kvm/mmu.c | 904 ++++++++++++++++++++++++ > arch/riscv/kvm/tlb.S | 42 ++ > arch/riscv/kvm/vcpu.c | 817 +++++++++++++++++++++ > arch/riscv/kvm/vcpu_exit.c | 553 +++++++++++++++ > arch/riscv/kvm/vcpu_sbi.c | 118 ++++ > arch/riscv/kvm/vcpu_switch.S | 367 ++++++++++ > arch/riscv/kvm/vcpu_timer.c | 106 +++ > arch/riscv/kvm/vm.c | 107 +++ > arch/riscv/kvm/vmid.c | 130 ++++ > drivers/clocksource/timer-riscv.c | 6 + > include/clocksource/timer-riscv.h | 14 + > include/uapi/linux/kvm.h | 1 + > 25 files changed, 3857 insertions(+), 5 deletions(-) > create mode 100644 arch/riscv/include/asm/kvm_host.h > create mode 100644 arch/riscv/include/asm/kvm_vcpu_timer.h > create mode 100644 arch/riscv/include/uapi/asm/kvm.h > create mode 100644 arch/riscv/kvm/Kconfig > create mode 100644 arch/riscv/kvm/Makefile > create mode 100644 arch/riscv/kvm/main.c > create mode 100644 arch/riscv/kvm/mmu.c > create mode 100644 arch/riscv/kvm/tlb.S > create mode 100644 arch/riscv/kvm/vcpu.c > create mode 100644 arch/riscv/kvm/vcpu_exit.c > create mode 100644 arch/riscv/kvm/vcpu_sbi.c > create mode 100644 arch/riscv/kvm/vcpu_switch.S > create mode 100644 arch/riscv/kvm/vcpu_timer.c > create mode 100644 arch/riscv/kvm/vm.c > create mode 100644 arch/riscv/kvm/vmid.c > create mode 100644 include/clocksource/timer-riscv.h > > -- > 2.17.1 >
