Hi Gregory,
On 7/11/19 4:31 PM, Gregory CLEMENT wrote:
> The VFIO reset hook is called every time a platform device is passed
> to a guest or removed from a guest.
>
> When the XHCI device is unbound from the host, the host driver
> disables the XHCI clocks/phys/regulators so when the device is passed
> to the guest it becomes dis-functional.
>
> This initial implementation uses the VFIO reset hook to enable the
> XHCI clocks/phys on behalf of the guest.
the platform reset module must also make sure there are no more DMA
requests and interrupts that can be sent by the device anymore.
>
> Ported from Marvell LSP code originally written by Yehuda Yitschak
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
> ---
> drivers/vfio/platform/reset/Kconfig | 8 +++
> drivers/vfio/platform/reset/Makefile | 2 +
> .../vfio/platform/reset/vfio_platform_xhci.c | 60 +++++++++++++++++++
> 3 files changed, 70 insertions(+)
> create mode 100644 drivers/vfio/platform/reset/vfio_platform_xhci.c
>
> diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
> index 392e3c09def0..14f620fd250d 100644
> --- a/drivers/vfio/platform/reset/Kconfig
> +++ b/drivers/vfio/platform/reset/Kconfig
> @@ -22,3 +22,11 @@ config VFIO_PLATFORM_BCMFLEXRM_RESET
> Enables the VFIO platform driver to handle reset for Broadcom FlexRM
>
> If you don't know what to do here, say N.
> +
> +config VFIO_PLATFORM_XHCI_RESET
> + tristate "VFIO support for USB XHCI reset"
> + depends on VFIO_PLATFORM
> + help
> + Enables the VFIO platform driver to handle reset for USB XHCI
> +
> + If you don't know what to do here, say N.
> diff --git a/drivers/vfio/platform/reset/Makefile b/drivers/vfio/platform/reset/Makefile
> index 7294c5ea122e..d84c4d3dc041 100644
> --- a/drivers/vfio/platform/reset/Makefile
> +++ b/drivers/vfio/platform/reset/Makefile
> @@ -1,7 +1,9 @@
> # SPDX-License-Identifier: GPL-2.0
> vfio-platform-calxedaxgmac-y := vfio_platform_calxedaxgmac.o
> vfio-platform-amdxgbe-y := vfio_platform_amdxgbe.o
> +vfio-platform-xhci-y := vfio_platform_xhci.o
>
> obj-$(CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET) += vfio-platform-calxedaxgmac.o
> obj-$(CONFIG_VFIO_PLATFORM_AMDXGBE_RESET) += vfio-platform-amdxgbe.o
> obj-$(CONFIG_VFIO_PLATFORM_BCMFLEXRM_RESET) += vfio_platform_bcmflexrm.o
> +obj-$(CONFIG_VFIO_PLATFORM_XHCI_RESET) += vfio-platform-xhci.o
> diff --git a/drivers/vfio/platform/reset/vfio_platform_xhci.c b/drivers/vfio/platform/reset/vfio_platform_xhci.c
> new file mode 100644
> index 000000000000..7b75a04402ee
> --- /dev/null
> +++ b/drivers/vfio/platform/reset/vfio_platform_xhci.c
> @@ -0,0 +1,60 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * VFIO platform driver specialized for XHCI reset
> + *
> + * Copyright 2016 Marvell Semiconductors, Inc.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
io, init, kernel should be removable (noticed init and kernel.h also are
in other reset modules though)
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/usb/phy.h>
> +
> +#include "../vfio_platform_private.h"
> +
> +#define MAX_XHCI_CLOCKS 4
Where does this number come from?
>From Documentation/devicetree/bindings/usb/usb-xhci.txt I understand
there are max 2 clocks, "core" and "reg" (I don't have any specific
knowledge on the device though).
> +#define MAX_XHCI_PHYS 2
not used
> +
> +int vfio_platform_xhci_reset(struct vfio_platform_device *vdev)
> +{
> + struct device *dev = vdev->device;
> + struct device_node *np = dev->of_node;
> + struct usb_phy *usb_phy;
> + struct clk *clk;
> + int ret, i;
> +
> + /*
> + * Compared to the native driver, no need to handle the
> + * deferred case, because the resources are already
> + * there
> + */
> + for (i = 0; i < MAX_XHCI_CLOCKS; i++) {
> + clk = of_clk_get(np, i);
> + if (!IS_ERR(clk)) {
> + ret = clk_prepare_enable(clk);
> + if (ret)
> + return -ENODEV;
return ret?
> + }
> + }
> +
> + usb_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0);
> + if (!IS_ERR(usb_phy)) {
> + ret = usb_phy_init(usb_phy);
> + if (ret)
> + return -ENODEV;
return ret?
> + }
> +
> + return 0;
> +}
> +
> +module_vfio_reset_handler("generic-xhci", vfio_platform_xhci_reset);
> +
> +MODULE_AUTHOR("Yehuda Yitschak");
> +MODULE_DESCRIPTION("Reset support for XHCI vfio platform device");
> +MODULE_LICENSE("GPL");
>
Thanks
Eric
