Re: [PATCH v1 9/9] smaples: add vfio-mdev-pci driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 24 Jun 2019 08:20:38 +0000
"Liu, Yi L" <yi.l.liu@xxxxxxxxx> wrote:

> Hi Alex,
> 
> > From: Alex Williamson [mailto:alex.williamson@xxxxxxxxxx]
> > Sent: Friday, June 21, 2019 11:58 PM
> > To: Liu, Yi L <yi.l.liu@xxxxxxxxx>
> > Subject: Re: [PATCH v1 9/9] smaples: add vfio-mdev-pci driver
> > 
> > On Fri, 21 Jun 2019 10:23:10 +0000
> > "Liu, Yi L" <yi.l.liu@xxxxxxxxx> wrote:
> >   
> > > Hi Alex,
> > >  
> > > > From: Alex Williamson [mailto:alex.williamson@xxxxxxxxxx]
> > > > Sent: Friday, June 21, 2019 5:08 AM
> > > > To: Liu, Yi L <yi.l.liu@xxxxxxxxx>
> > > > Subject: Re: [PATCH v1 9/9] smaples: add vfio-mdev-pci driver
> > > >
> > > > On Thu, 20 Jun 2019 13:00:34 +0000
> > > > "Liu, Yi L" <yi.l.liu@xxxxxxxxx> wrote:
> > > >  
> > > > > Hi Alex,
> > > > >  
> > > > > > From: Alex Williamson [mailto:alex.williamson@xxxxxxxxxx]
> > > > > > Sent: Thursday, June 20, 2019 12:27 PM
> > > > > > To: Liu, Yi L <yi.l.liu@xxxxxxxxx>
> > > > > > Subject: Re: [PATCH v1 9/9] smaples: add vfio-mdev-pci driver
> > > > > >
> > > > > > On Sat,  8 Jun 2019 21:21:11 +0800
> > > > > > Liu Yi L <yi.l.liu@xxxxxxxxx> wrote:
> > > > > >  
> > > > > > > This patch adds sample driver named vfio-mdev-pci. It is to wrap
> > > > > > > a PCI device as a mediated device. For a pci device, once bound
> > > > > > > to vfio-mdev-pci driver, user space access of this device will
> > > > > > > go through vfio mdev framework. The usage of the device follows
> > > > > > > mdev management method. e.g. user should create a mdev before
> > > > > > > exposing the device to user-space.  
> > > [...]  
> > > > >  
> > > > > > However, the patch below just makes the mdev interface behave
> > > > > > correctly, I can't make it work on my system because commit
> > > > > > 7bd50f0cd2fd ("vfio/type1: Add domain at(de)taching group helpers")  
> > > > >
> > > > > What error did you encounter. I tested the patch with a device in a
> > > > > singleton iommu group. I'm also searching a proper machine with
> > > > > multiple devices in an iommu group and test it.  
> > > >
> > > > In vfio_iommu_type1, iommu backed mdev devices use the
> > > > iommu_attach_device() interface, which includes:
> > > >
> > > >         if (iommu_group_device_count(group) != 1)
> > > >                 goto out_unlock;
> > > >
> > > > So it's impossible to use with non-singleton groups currently.  
> > >
> > > Hmmm, I think it is no longer good to use iommu_attach_device() for iommu
> > > backed mdev devices now. In this flow, the purpose here is to attach a device
> > > to a domain and no need to check whether the device is in a singleton iommu
> > > group. I think it would be better to use __iommu_attach_device() instead of
> > > iommu_attach_device().  
> > 
> > That's a static and unexported, it's intentionally not an exposed
> > interface.  We can't attach devices in the same group to separate
> > domains allocated through iommu_domain_alloc(), this would violate the
> > iommu group isolation principles.  
> 
> Go it. :-) Then not good to expose such interface. But to support devices in
> non-singleton iommu group, we need to have a new interface which doesn't
> count the devices but attach all the devices.

We have iommu_attach_group(), we just need to track which groups are
attached.
 
> > > Also I found a potential mutex lock issue if using iommu_attach_device().
> > > In vfio_iommu_attach_group(), it uses iommu_group_for_each_dev() to loop
> > > all the devices in the group. It holds group->mutex. And then  
> > vfio_mdev_attach_domain()  
> > > calls iommu_attach_device() which also tries to get group->mutex. This would be
> > > an issue. If you are fine with it, I may post another patch for it. :-)  
> > 
> > Gack, yes, please send a patch.  
> 
> Would do it, may be together with the support of vfio-mdev-pci on devices in
> non-singleton iommu group.
> 
> >   
> > > > > > used iommu_attach_device() rather than iommu_attach_group() for non-aux
> > > > > > mdev iommu_device.  Is there a requirement that the mdev parent device
> > > > > > is in a singleton iommu group?  
> > > > >
> > > > > I don't think there should have such limitation. Per my understanding,
> > > > > vfio-mdev-pci should also be able to bind to devices which shares
> > > > > iommu group with other devices. vfio-pci works well for such devices.
> > > > > And since the two drivers share most of the codes, I think vfio-mdev-pci
> > > > > should naturally support it as well.  
> > > >
> > > > Yes, the difference though is that vfio.c knows when devices are in the
> > > > same group, which mdev vfio.c only knows about the non-iommu backed
> > > > group, not the group that is actually used for the iommu backing.  So
> > > > we either need to enlighten vfio.c or further abstract those details in
> > > > vfio_iommu_type1.c.  
> > >
> > > Not sure if it is necessary to introduce more changes to vfio.c or
> > > vfio_iommu_type1.c. If it's only for the scenario which two devices share an
> > > iommu_group, I guess it could be supported by using __iommu_attach_device()
> > > which has no device counting for the group. But maybe I missed something
> > > here. It would be great if you can elaborate a bit for it. :-)  
> > 
> > We need to use the group semantics, there's a reason
> > __iommu_attach_device() is not exposed, it's an internal helper.  I
> > think there's no way around that we need to somewhere track the actual
> > group we're attaching to and have the smarts to re-use it for other
> > devices in the same group.  
> 
> Hmmm, exposing __iommu_attach_device() is not good, let's forget it. :-)
> 
> > > > > > If this is a simplification, then
> > > > > > vfio-mdev-pci should not bind to devices where this is violated since
> > > > > > there's no way to use the device.  Can we support it though?  
> > > > >
> > > > > yeah, I think we need to support it.
> > > > >  
> > > > > > If I have two devices in the same group and bind them both to
> > > > > > vfio-mdev-pci, I end up with three groups, one for each mdev device and
> > > > > > the original physical device group.  vfio.c works with the mdev groups
> > > > > > and will try to match both groups to the container.  vfio_iommu_type1.c
> > > > > > also works with the mdev groups, except for the point where we actually
> > > > > > try to attach a group to a domain, which is the only window where we use
> > > > > > the iommu_device rather than the provided group, but we don't record
> > > > > > that anywhere.  Should struct vfio_group have a pointer to a reference
> > > > > > counted object that tracks the actual iommu_group attached, such that
> > > > > > we can determine that the group is already attached to the domain and
> > > > > > not try to attach again?  
> > > > >
> > > > > Agreed, we need to avoid such duplicated attach. Instead of adding
> > > > > reference counted object in vfio_group. I'm also considering the logic
> > > > > below:  
> > >
> > > Re-walked the code, I find the duplicated attach will happen on the vfio-mdev-pci
> > > device as vfio_mdev_attach_domain() only attaches the parent devices of
> > > iommu backed mdevs instead of all the devices within the physical iommu_group.
> > > While for a vfio-pci device, it will use iommu_attach_group() which attaches all the
> > > devices within the iommu backed group. The same with detach,
> > > vfio_mdev_detach_domain() detaches selective devices instead of all devices  
> > within  
> > > the iommu backed group.  
> > 
> > Yep, that's not good, for the non-aux case we need to follow the usual
> > group semantics or else we're limited to singleton groups.  
> 
> yep.
> 
> >   
> > > > >     /*
> > > > >       * Do this check in vfio_iommu_type1_attach_group(), after mdev_group
> > > > >       * is initialized.
> > > > >       */
> > > > >     if (vfio_group->mdev_group) {
> > > > >          /*
> > > > >            * vfio_group->mdev_group is true means vfio_group->iommu_group
> > > > >            * is not the actual iommu_group which is going to be attached to
> > > > >            * domain. To avoid duplicate iommu_group attach, needs to check if
> > > > >            * the actual iommu_group. vfio_get_parent_iommu_group() is a
> > > > >            * newly added helper function which returns the actual attach
> > > > >            * iommu_group going to be attached for this mdev group.
> > > > >               */
> > > > >          p_iommu_group = vfio_get_parent_iommu_group(
> > > > >                                                                          vfio_group->iommu_group);
> > > > >          list_for_each_entry(d, &iommu->domain_list, next) {
> > > > >                  if (find_iommu_group(d, p_iommu_group)) {
> > > > >                          mutex_unlock(&iommu->lock);
> > > > >                          // skip group attach;
> > > > >                  }
> > > > >          }  
> > > >
> > > > We don't currently create a struct vfio_group for the parent, only for
> > > > the mdev iommu group.  The iommu_attach for an iommu backed mdev
> > > > doesn't leave any traces of where it is actually attached, we just
> > > > count on retracing our steps for the detach.  That's why I'm thinking
> > > > we need an object somewhere to track it and it needs to be reference
> > > > counted so that if both a vfio-mdev-pci device and a vfio-pci device
> > > > are using it, we leave it in place if either one is removed.  
> > >
> > > Hmmm, here we are talking about tracking in iommu_group level though
> > > no good idea on where the object should  be placed yet. However, we may
> > > need to tack in device level as I mentioned in above paragraph. If not,
> > > there may be sequence issue. e.g. if vfio-mdev-pci device is attached
> > > firstly, then the object will be initialized, and when vfio-pci device is
> > > attached, we will find the attach should be skipped and just inc the ref count.
> > > But actually it should not be skipped since the vfio-mdev-pci attach does not
> > > attach all devices within the iommu backed group.  
> > 
> > We can't do that though, the entire group needs to be attached.  
> 
> Agree, may be getting another interface which is similar with
> iommu_attach_device(), but works for devices which is in non-singleton
> groups. So the attach for iommu backed mdev will also result in a sound
> attach to all the devices which share iommu group with the parent device.

iommu_attach_group()...

> This is just like vfio-pci devices. For the object for tracking purpose may be
> as below:
> 
> struct vfio_iommu_object {
> 	struct iommu_group *group;
> 	struct kref kref;
> };
> 
> And I think it should be per-domain and per-iommu backed group since
> aux-domain support allows a iommu backed group to be attached to
> multiple domains. I'm considering if it is ok to have a list in vfio_domain.
> Before each domain attach, vfio should do a check in the list if the iommu
> backed group has been attached already. For vfio-pci devices, use its iommu
> group to do a search in the list. For vfio-mdev-pci devices, use its parent
> devices iommu group to do a search. Thus avoid duplicate attach. Thoughts?

vfio_iommu_type1 already creates a struct vfio_iommu per container,
which includes a linked list of struct vfio_domain objects, where each
vfio_domain has a list of struct vfio_group objects.  So we need to
include the iommu device iommu group in that latter list somehow.
Thanks,

Alex



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux