Re: [PATCH 1/5] BIOS changes for irq0->inti2 override (v8)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 30, 2009 at 11:59:15PM -0400, Beth Kon wrote:
>  
> +#ifdef BX_QEMU
> +void irq0_override_probe(void)
> +{
> +    if(qemu_cfg_port) {
> +        qemu_cfg_select(QEMU_CFG_IRQ0_OVERRIDE);
> +        qemu_cfg_read(&irq0_override, 1);
> +        return;
Drop return here.

> +    }
> +}
> +#endif
> +
>  void cpu_probe(void)
>  {
>      uint32_t eax, ebx, ecx, edx;
> @@ -1153,7 +1168,14 @@ static void mptable_init(void)
>      putstr(&q, "0.1         "); /* vendor id */
>      putle32(&q, 0); /* OEM table ptr */
>      putle16(&q, 0); /* OEM table size */
> +#ifdef BX_QEMU
> +    if (irq0_override)
> +        putle16(&q, MAX_CPUS + 17); /* entry count */
> +    else
> +        putle16(&q, MAX_CPUS + 18); /* entry count */
> +#else
>      putle16(&q, MAX_CPUS + 18); /* entry count */
> +#endif
>      putle32(&q, 0xfee00000); /* local APIC addr */
>      putle16(&q, 0); /* ext table length */
>      putb(&q, 0); /* ext table checksum */
> @@ -1197,6 +1219,13 @@ static void mptable_init(void)
>  
>      /* irqs */
>      for(i = 0; i < 16; i++) {
> +#ifdef BX_QEMU
> +        /* One entry per ioapic interrupt destination. Destination 2 is covered
> +         * by irq0->inti2 override (i == 0). Source IRQ 2 is unused
> +         */
> +        if (irq0_override && i == 2)
> +            continue;
> +#endif
>          putb(&q, 3); /* entry type = I/O interrupt */
>          putb(&q, 0); /* interrupt type = vectored interrupt */
>          putb(&q, 0); /* flags: po=0, el=0 */
> @@ -1204,7 +1233,12 @@ static void mptable_init(void)
>          putb(&q, 0); /* source bus ID = ISA */
>          putb(&q, i); /* source bus IRQ */
>          putb(&q, ioapic_id); /* dest I/O APIC ID */
> -        putb(&q, i); /* dest I/O APIC interrupt in */
> +#ifdef BX_QEMU
> +        if (irq0_override && i == 0)
> +            putb(&q, 2); /* dest I/O APIC interrupt in */
> +        else
> +#endif
> +            putb(&q, i); /* dest I/O APIC interrupt in */
>      }
>      /* patch length */
>      len = q - mp_config_table;
> @@ -1768,23 +1802,21 @@ void acpi_bios_init(void)
>          io_apic->io_apic_id = smp_cpus;
>          io_apic->address = cpu_to_le32(0xfec00000);
>          io_apic->interrupt = cpu_to_le32(0);
> -#ifdef BX_QEMU
> -#ifdef HPET_WORKS_IN_KVM
>          io_apic++;
> -
> -        int_override = (void *)io_apic;
> -        int_override->type = APIC_XRUPT_OVERRIDE;
> -        int_override->length = sizeof(*int_override);
> -        int_override->bus = cpu_to_le32(0);
> -        int_override->source = cpu_to_le32(0);
> -        int_override->gsi = cpu_to_le32(2);
> -        int_override->flags = cpu_to_le32(0);
> -#endif
> +        int_override = (struct madt_int_override*)(io_apic);
> +#ifdef BX_QEMU
> +        if (irq0_override) {
> +            memset(int_override, 0, sizeof(*int_override));
> +            int_override->type = APIC_XRUPT_OVERRIDE;
> +            int_override->length = sizeof(*int_override);
> +            int_override->source = 0;
> +            int_override->gsi = 2;
> +            int_override->flags = 0; /* conforms to bus specifications */
> +            int_override++;
> +        }
>  #endif
> -
> -        int_override = (struct madt_int_override*)(io_apic + 1);
> -        for ( i = 0; i < 16; i++ ) {
> -            if ( PCI_ISA_IRQ_MASK & (1U << i) ) {
> +        for (i = 0; i < 16; i++) {
> +            if (PCI_ISA_IRQ_MASK & (1U << i)) {
>                  memset(int_override, 0, sizeof(*int_override));
>                  int_override->type   = APIC_XRUPT_OVERRIDE;
>                  int_override->length = sizeof(*int_override);
> @@ -2708,6 +2740,9 @@ void rombios32_init(uint32_t *s3_resume_vector, uint8_t *shutdown_flag)
>  
>      if (bios_table_cur_addr != 0) {
>  
> +#ifdef BX_QEMU
> +        irq0_override_probe();
> +#endif
>          mptable_init();
>  
>          smbios_init();
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
			Gleb.
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux