On 17/05/2019 20:04, Pierre Morel wrote:
On 17/05/2019 18:41, Alex Williamson wrote:
On Fri, 17 May 2019 18:16:50 +0200
Pierre Morel <pmorel@xxxxxxxxxxxxx> wrote:
We implement the capability interface for VFIO_IOMMU_GET_INFO.
When calling the ioctl, the user must specify
VFIO_IOMMU_INFO_CAPABILITIES to retrieve the capabilities and
must check in the answer if capabilities are supported.
The iommu get_attr callback will be used to retrieve the specific
attributes and fill the capabilities.
Currently two Z-PCI specific capabilities will be queried and
filled by the underlying Z specific s390_iommu:
VFIO_IOMMU_INFO_CAP_QFN for the PCI query function attributes
and
VFIO_IOMMU_INFO_CAP_QGRP for the PCI query function group.
Other architectures may add new capabilities in the same way
after enhancing the architecture specific IOMMU driver.
Signed-off-by: Pierre Morel <pmorel@xxxxxxxxxxxxx>
---
drivers/vfio/vfio_iommu_type1.c | 122
+++++++++++++++++++++++++++++++++++++++-
1 file changed, 121 insertions(+), 1 deletion(-)
diff --git a/drivers/vfio/vfio_iommu_type1.c
b/drivers/vfio/vfio_iommu_type1.c
index d0f731c..9435647 100644
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -1658,6 +1658,97 @@ static int
vfio_domains_have_iommu_cache(struct vfio_iommu *iommu)
return ret;
}
+static int vfio_iommu_type1_zpci_fn(struct iommu_domain *domain,
+ struct vfio_info_cap *caps, size_t size)
+{
+ struct vfio_iommu_type1_info_pcifn *info_fn;
+ int ret;
+
+ info_fn = kzalloc(size, GFP_KERNEL);
+ if (!info_fn)
+ return -ENOMEM;
+
+ ret = iommu_domain_get_attr(domain, DOMAIN_ATTR_ZPCI_FN,
+ &info_fn->response);
What ensures that the 'struct clp_rsp_query_pci' returned from this
get_attr remains consistent with a 'struct vfio_iommu_pci_function'?
Why does the latter contains so many reserved fields (beyond simply
alignment) for a user API? What fields of these structures are
actually useful to userspace? Should any fields not be exposed to the
user? Aren't BAR sizes redundant to what's available through the vfio
PCI API? I'm afraid that simply redefining an internal structure as
the API leaves a lot to be desired too. Thanks,
Alex
Hi Alex,
I simply used the structure returned by the firmware to be sure to be
consistent with future evolutions and facilitate the copy from CLP and
to userland.
If you prefer, and I understand that this is the case, I can define a
specific VFIO_IOMMU structure with only the fields relevant to the user,
leaving future enhancement of the user's interface being implemented in
another kernel patch when the time has come.
In fact, the struct will have all defined fields I used but not the BAR
size and address (at least for now because there are special cases we do
not support yet with bars).
All the reserved fields can go away.
Is it more conform to your idea?
Also I have 2 interfaces:
s390_iommu.get_attr <-I1-> VFIO_IOMMU <-I2-> userland
Do you prefer:
- 2 different structures, no CLP raw structure
- the CLP raw structure for I1 and a VFIO specific structure for I2
Hi Alex,
I am back again on this.
This solution here above seems to me the best one but in this way I must
include S390 specific include inside the iommu_type1, which is AFAIU not
a good thing.
It seems that the powerpc architecture use a solution with a dedicated
VFIO_IOMMU, the vfio_iommu_spar_tce.
Wouldn't it be a solution for s390 too, to use the vfio_iommu_type1 as a
basis to have a s390 dedicated solution.
Then it becomes easier to have on one side the s390_iommu interface,
S390 specific, and on the other side a VFIO interface without a blind
copy of the firmware values.
Do you think it is a viable solution?
Thanks,
Pierre
- the same VFIO structure for both I1 and I2
Thank you if you could give me a direction for this.
Thanks for the comments, and thanks a lot to have answered so quickly.
Pierre
--
Pierre Morel
Linux/KVM/QEMU in Böblingen - Germany
