On 4/24/19 11:10 AM, Singh, Brijesh wrote:
> The command is used for encrypting the guest memory region using the encryption
> context created with KVM_SEV_SEND_START.
>
> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> Cc: Ingo Molnar <mingo@xxxxxxxxxx>
> Cc: "H. Peter Anvin" <hpa@xxxxxxxxx>
> Cc: Paolo Bonzini <pbonzini@xxxxxxxxxx>
> Cc: "Radim Krčmář" <rkrcmar@xxxxxxxxxx>
> Cc: Joerg Roedel <joro@xxxxxxxxxx>
> Cc: Borislav Petkov <bp@xxxxxxx>
> Cc: Tom Lendacky <thomas.lendacky@xxxxxxx>
> Cc: x86@xxxxxxxxxx
> Cc: kvm@xxxxxxxxxxxxxxx
> Cc: linux-kernel@xxxxxxxxxxxxxxx
> Signed-off-by: Brijesh Singh <brijesh.singh@xxxxxxx>
> ---
> .../virtual/kvm/amd-memory-encryption.rst | 23 ++++
> arch/x86/kvm/svm.c | 128 +++++++++++++++++-
> include/uapi/linux/kvm.h | 9 ++
> 3 files changed, 157 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/virtual/kvm/amd-memory-encryption.rst b/Documentation/virtual/kvm/amd-memory-encryption.rst
> index 340ac4f87321..a0208e171489 100644
> --- a/Documentation/virtual/kvm/amd-memory-encryption.rst
> +++ b/Documentation/virtual/kvm/amd-memory-encryption.rst
> @@ -262,6 +262,29 @@ Returns: 0 on success, -negative on error
> __u32 amd_cert_len;
> };
>
> +11. KVM_SEV_SEND_UPDATE_DATA
> +----------------------------
> +
> +The KVM_SEV_SEND_UPDATE_DATA command can be used by the hypervisor to encrypt the
> +outgoing guest memory region with encryption context creating using KVM_SEV_SEND_START.
with the encryption context created using...
> +
> +Parameters (in): struct kvm_sev_send_update_data
> +
> +Returns: 0 on success, -negative on error
> +
> +::
> +
> + struct kvm_sev_launch_send_update_data {
> + __u64 hdr_uaddr; /* userspace address containing the packet header */
> + __u32 hdr_len;
> +
> + __u64 guest_uaddr; /* the source memory region to be encrypted */
> + __u32 guest_len;
> +
> + __u64 trans_uaddr; /* the destition memory region */
> + __u32 trans_len;
> + };
> +
> References
> ==========
>
> diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
> index 4c2a225ba546..a1cfd36d6195 100644
> --- a/arch/x86/kvm/svm.c
> +++ b/arch/x86/kvm/svm.c
> @@ -418,6 +418,7 @@ enum {
>
> static unsigned int max_sev_asid;
> static unsigned int min_sev_asid;
> +static unsigned long me_mask;
sev_me_mask ?
> static unsigned long *sev_asid_bitmap;
> #define __sme_page_pa(x) __sme_set(page_to_pfn(x) << PAGE_SHIFT)
>
> @@ -1216,15 +1217,21 @@ static int avic_ga_log_notifier(u32 ga_tag)
> static __init int sev_hardware_setup(void)
> {
> struct sev_user_data_status *status;
> + int eax, ebx;
> int rc;
>
> - /* Maximum number of encrypted guests supported simultaneously */
> - max_sev_asid = cpuid_ecx(0x8000001F);
> + /*
> + * Query the memory encryption information.
> + * EBX: Bit 0:5 Pagetable bit position used to indicate encryption (aka Cbit).
> + * ECX: Maximum number of encrypted guests supported simultaneously.
> + * EDX: Minimum ASID value that should be used for SEV guest.
> + */
> + cpuid(0x8000001f, &eax, &ebx, &max_sev_asid, &min_sev_asid);
>
> if (!max_sev_asid)
> return 1;
>
> - /* Minimum ASID value that should be used for SEV guest */
> + me_mask = 1UL << (ebx & 0x3f);
> min_sev_asid = cpuid_edx(0x8000001F);
You can remove this since you obtained it with the cpuid() call above.
>
> /* Initialize SEV ASID bitmap */
> @@ -7053,6 +7060,118 @@ static int sev_send_start(struct kvm *kvm, struct kvm_sev_cmd *argp)
> return ret;
> }
>
> +static int sev_send_update_data(struct kvm *kvm, struct kvm_sev_cmd *argp)
> +{
> + struct kvm_sev_info *sev = &to_kvm_svm(kvm)->sev_info;
> + struct sev_data_send_update_data *data;
> + struct kvm_sev_send_update_data params;
> + void *hdr = NULL, *trans_data = NULL;
> + struct page **guest_page = NULL;
> + unsigned long n;
> + int ret, offset;
> +
> + if (!sev_guest(kvm))
> + return -ENOTTY;
> +
> + if (copy_from_user(¶ms, (void __user *)(uintptr_t)argp->data,
> + sizeof(struct kvm_sev_send_update_data)))
> + return -EFAULT;
> +
> + data = kzalloc(sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + /* userspace wants to query either header or trans length */
> + if (!params.trans_len || !params.hdr_len)
> + goto cmd;
> +
> + ret = -EINVAL;
> + if (!params.trans_uaddr || !params.guest_uaddr ||
> + !params.guest_len || !params.hdr_uaddr)
> + goto e_free;
> +
> + /* Check if we are crossing the page boundry */
> + ret = -EINVAL;
> + offset = params.guest_uaddr & (PAGE_SIZE - 1);
> + if ((params.guest_len + offset > PAGE_SIZE))
> + goto e_free;
> +
> + ret = -ENOMEM;
> + hdr = kmalloc(params.hdr_len, GFP_KERNEL);
> + if (!hdr)
> + goto e_free;
> +
> + data->hdr_address = __psp_pa(hdr);
> + data->hdr_len = params.hdr_len;
> +
> + ret = -ENOMEM;
> + trans_data = kmalloc(params.trans_len, GFP_KERNEL);
> + if (!trans_data)
> + goto e_free;
> +
> + data->trans_address = __psp_pa(trans_data);
> + data->trans_len = params.trans_len;
> +
> + /* Pin guest memory */
> + ret = -EFAULT;
> + guest_page = sev_pin_memory(kvm, params.guest_uaddr & PAGE_MASK,
> + PAGE_SIZE, &n, 0);
> + if (!guest_page)
> + goto e_free;
> +
> + data->guest_address = __sme_page_pa(guest_page[0]) + offset;
If the C-bit needs to be set regardless below, then you don't need the
__sme version of this.
> + data->guest_len = params.guest_len;
> +
> + /*
> + * The SEND_UPDATE_DATA command requires C-bit to be always set.
> + * The __sme_page_pa() takes care of setting the C-bit only when SME
> + * is enabled on the host. But we need to set the C-bit regarless of
regardless
Thanks,
Tom
> + * the SME state.
> + */
> + data->guest_address |= me_mask;
> +
> + /* flush the caches to ensure that DRAM has recent contents */
> + sev_clflush_pages(guest_page, 1);
> +
> +cmd:
> + data->handle = sev->handle;
> + ret = sev_issue_cmd(kvm, SEV_CMD_SEND_UPDATE_DATA, data, &argp->error);
> +
> + /* userspace asked for header or trans length and FW responded with data */
> + if (!params.trans_len || !params.hdr_len) {
> + params.hdr_len = data->hdr_len;
> + params.trans_len = data->trans_len;
> + goto done;
> + }
> +
> + if (ret)
> + goto e_unpin;
> +
> + /* copy transport buffer to user space */
> + if (copy_to_user((void __user *)(uintptr_t)params.trans_uaddr,
> + trans_data, params.trans_len)) {
> + ret = -EFAULT;
> + goto e_unpin;
> + }
> +
> + /* copy packet header to userspace */
> + if (copy_to_user((void __user *)(uintptr_t)params.hdr_uaddr, hdr, params.hdr_len))
> + ret = -EFAULT;
> +
> +e_unpin:
> + sev_unpin_memory(kvm, guest_page, n);
> +done:
> + if (copy_to_user((void __user *)(uintptr_t)argp->data, ¶ms,
> + sizeof(struct kvm_sev_send_update_data)))
> + ret = -EFAULT;
> +e_free:
> + kfree(data);
> + kfree(trans_data);
> + kfree(hdr);
> +
> + return ret;
> +}
> +
> static int svm_mem_enc_op(struct kvm *kvm, void __user *argp)
> {
> struct kvm_sev_cmd sev_cmd;
> @@ -7097,6 +7216,9 @@ static int svm_mem_enc_op(struct kvm *kvm, void __user *argp)
> case KVM_SEV_SEND_START:
> r = sev_send_start(kvm, &sev_cmd);
> break;
> + case KVM_SEV_SEND_UPDATE_DATA:
> + r = sev_send_update_data(kvm, &sev_cmd);
> + break;
> default:
> r = -EINVAL;
> goto out;
> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> index f425418bec13..0bee91bba329 100644
> --- a/include/uapi/linux/kvm.h
> +++ b/include/uapi/linux/kvm.h
> @@ -1532,6 +1532,15 @@ struct kvm_sev_send_start {
> __u32 session_len;
> };
>
> +struct kvm_sev_send_update_data {
> + __u64 hdr_uaddr;
> + __u32 hdr_len;
> + __u64 guest_uaddr;
> + __u32 guest_len;
> + __u64 trans_uaddr;
> + __u32 trans_len;
> +};
> +
> #define KVM_DEV_ASSIGN_ENABLE_IOMMU (1 << 0)
> #define KVM_DEV_ASSIGN_PCI_2_3 (1 << 1)
> #define KVM_DEV_ASSIGN_MASK_INTX (1 << 2)
>
