On Thu, Apr 25, 2019 at 03:07:35PM +0800, Like Xu wrote: > On 2019/4/25 14:30, Xiaoyao Li wrote: > >>>Besides, the problem of simply using cpuid_exc(0x1f) in Sean's codes is > >>>that we cannot assmue the reserved bits 31:16 of ECX is always 0 for the > >>>future generation. It doesn't matter if future CPUs use 31:16 for other things since this code only cares about whether or not CPUID.1F exists. The check entry->eax >= 0x1f ensures that CPUID.1F will return zeros if the leaf does *NOT* exist, ergo the check against CPUID.1F.ECX only needs to look for a non-zero value. CPUID.1F.ECX is the logical choice for detecting support because it is guaranteed to be non-zero if the leaf actually exists (because bits 15:8 will be non-zero). Whether or not bits 31:16 are non-zero is irrelevant. > >> > >>It's true cause the statement in public spec is not "Reserved = 0" but > >>"Bits 31 - 16: Reserved". > >> > >>> > >>>In my opinion, Sean's codes is OK and much simple and clear. > >> > >>If the host cpuid.0.eax is greater than 0x1f but actually it doesn't > >>have multi-chip packaging technology and we may want to expose > >>entry->eax to some value smaller than 0x1f but greater than 0x14, much > >>effort needs to apply on Sean's code. > >> > >>My improvement is good to overwrite cpuid.0.eax in future usage > >>from the perspective of kvm feature setting not just from value check. > > > >Alright, there is something wrong in your code that you haven't realised. > > > >When you do > > entry->eax = min(entry->eax, (u32)(f_intel_pt ? 0x14 : 0xd)); > > > >it changes the entry->eax if entry->eax > 0x14. So you cannot directly use > >cpuid_ecx(0x1f). At least, you need to cache the value of entry->eax, like: > > > > u32 max_leaf = entry->eax; > > entry->eax = min(entry->eax, (u32)(f_intel_pt ? 0x14 : 0xd)); > > > > //...leaf between 0x14 and 0x1f > > > > if (max_leaf >= 0x1f && (cpuid_ecx(0x1f) & 0x0000ff00)) > > entry->eax = 0x1f; > > The cache value make no sense on this. Xiaoyao is pointing out that by limiting entry->eax to 0x14 (or 0xd), then it can't be used to detect support for CPUID.1F since KVM will have lost the required information. > >However, handling in increasing order in totally wrong. Since it's to report the > >max the leaf supported, we should handle in descending order, which is what Sean > >does. > > There is no need to check "entry->eax >= 0x1f" before "setting entry->eax = > 0x1f" if and only if cpuid_ecx(0x1f) meets requirements. entry->eax absolutely needs to be checked, otherwise you have no idea what CPUID leaf is actually being consumed. For example, a CPU with a maximum basic CPUID leaf of 0xB will report information that is indistinguishable from the actual CPUID.1F, i.e. KVM will incorrectly think the CPU supports CPUID.1F regardless of what heuristic is used to detect a "valid" CPUID.1F if it only looks at the result of CPUID.1F. > An increasing manner helps to overwrite this value on demand in a flat code > flow (easy to understand and maintain) not an if-else_if-else flow. Maybe in the future the code will need to be refactored as more cases are added, but for now an if-else is quite readable. Worry about the future when it happens. :-)
