[PATCH 25/27] x86/fpu: Add a fastpath to copy_fpstate_to_sigframe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If the CPU holds the FPU register for the current task then we can try to save
them directly to the userland stack frame. This has to be done with the
pagefault disabled because we can't fault (while the FPU registers are locked)
and therefore the operation might fail.
If it fails try the slowpath which can handle faults.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
---
 arch/x86/kernel/fpu/signal.c | 34 ++++++++++++++++++++++------------
 1 file changed, 22 insertions(+), 12 deletions(-)

diff --git a/arch/x86/kernel/fpu/signal.c b/arch/x86/kernel/fpu/signal.c
index f20e1d1fffa29..baf1588d7060c 100644
--- a/arch/x86/kernel/fpu/signal.c
+++ b/arch/x86/kernel/fpu/signal.c
@@ -144,8 +144,10 @@ static inline int copy_fpregs_to_sigframe(struct xregs_state __user *buf)
  *	buf == buf_fx for 64-bit frames and 32-bit fsave frame.
  *	buf != buf_fx for 32-bit frames with fxstate.
  *
- * Save the state to task's fpu->state and then copy it to the user frame
- * pointed by the aligned pointer 'buf_fx'.
+ * Try to save it directly to the user frame with disabled page fault handler.
+ * If this fails then do the slow path where the FPU state is first saved to
+ * task's fpu->state and then copy it to the user frame pointed by the aligned
+ * pointer 'buf_fx'.
  *
  * If this is a 32-bit frame with fxstate, put a fsave header before
  * the aligned state at 'buf_fx'.
@@ -159,6 +161,7 @@ int copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
 	struct xregs_state *xsave = &fpu->state.xsave;
 	struct task_struct *tsk = current;
 	int ia32_fxstate = (buf != buf_fx);
+	int ret = -EFAULT;
 
 	ia32_fxstate &= (IS_ENABLED(CONFIG_X86_32) ||
 			 IS_ENABLED(CONFIG_IA32_EMULATION));
@@ -174,22 +177,29 @@ int copy_fpstate_to_sigframe(void __user *buf, void __user *buf_fx, int size)
 	fpregs_lock();
 	/*
 	 * If we do not need to load the FPU registers at return to userspace
-	 * then the CPU has the current state and we need to save it. Otherwise
-	 * it is already done and we can skip it.
+	 * then the CPU has the current state. Try to save it directly to
+	 * userland's stack frame if it does not cause a pagefault. If it does,
+	 * try the slowpath.
 	 */
 	if (!test_thread_flag(TIF_NEED_FPU_LOAD)) {
-		copy_fpregs_to_fpstate(fpu);
+		pagefault_disable();
+		ret = copy_fpregs_to_sigframe(buf_fx);
+		pagefault_enable();
+		if (ret)
+			copy_fpregs_to_fpstate(fpu);
 		set_thread_flag(TIF_NEED_FPU_LOAD);
 	}
 	fpregs_unlock();
 
-	if (using_compacted_format()) {
-		if (copy_xstate_to_user(buf_fx, xsave, 0, size))
-			return -1;
-	} else {
-		fpstate_sanitize_xstate(fpu);
-		if (__copy_to_user(buf_fx, xsave, fpu_user_xstate_size))
-			return -1;
+	if (ret) {
+		if (using_compacted_format()) {
+			if (copy_xstate_to_user(buf_fx, xsave, 0, size))
+				return -1;
+		} else {
+			fpstate_sanitize_xstate(fpu);
+			if (__copy_to_user(buf_fx, xsave, fpu_user_xstate_size))
+				return -1;
+		}
 	}
 
 	/* Save the fsave header for the 32-bit frames. */
-- 
2.20.1




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux