Re: [PATCH 8/8] vfio/mdev: Improve the create/remove sequence

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 22 Mar 2019 18:20:35 -0500
Parav Pandit <parav@xxxxxxxxxxxx> wrote:

> There are five problems with current code structure.
> 1. mdev device is placed on the mdev bus before it is created in the
> vendor driver. Once a device is placed on the mdev bus without creating
> its supporting underlying vendor device, an open() can get triggered by
> userspace on partially initialized device.
> Below ladder diagram highlight it.
> 
>       cpu-0                                       cpu-1
>       -----                                       -----
>    create_store()
>      mdev_create_device()
>        device_register()
>           ...
>          vfio_mdev_probe()
>          ...creates char device
>                                         vfio_mdev_open()
>                                           parent->ops->open(mdev)
>                                             vfio_ap_mdev_open()
>                                               matrix_mdev = NULL
>         [...]
>         parent->ops->create()
>           vfio_ap_mdev_create()
>             mdev_set_drvdata(mdev, matrix_mdev);
>             /* Valid pointer set above */
> 
> 2. Current creation sequence is,
>    parent->ops_create()
>    groups_register()
> 
> Remove sequence is,
>    parent->ops->remove()
>    groups_unregister()
> However, remove sequence should be exact mirror of creation sequence.
> Once this is achieved, all users of the mdev will be terminated first
> before removing underlying vendor device.
> (Follow standard linux driver model).
> At that point vendor's remove() ops shouldn't failed because device is
> taken off the bus that should terminate the users.
> 
> 3. Additionally any new mdev driver that wants to work on mdev device
> during probe() routine registered using mdev_register_driver() needs to
> get stable mdev structure.
> 
> 4. In following sequence, child devices created while removing mdev parent
> device can be left out, or it may lead to race of removing half
> initialized child mdev devices.
> 
> issue-1:
> --------
>        cpu-0                         cpu-1
>        -----                         -----
>                                   mdev_unregister_device()
>                                      device_for_each_child()
>                                         mdev_device_remove_cb()
>                                             mdev_device_remove()
> create_store()
>   mdev_device_create()                   [...]
>        device_register()
>                                   parent_remove_sysfs_files()
>                                   /* BUG: device added by cpu-0
>                                    * whose parent is getting removed.
>                                    */
> 
> issue-2:
> --------
>        cpu-0                         cpu-1
>        -----                         -----
> create_store()
>   mdev_device_create()                   [...]
>        device_register()
> 
>        [...]                      mdev_unregister_device()
>                                      device_for_each_child()
>                                         mdev_device_remove_cb()
>                                             mdev_device_remove()
> 
>        mdev_create_sysfs_files()
>        /* BUG: create is adding
>         * sysfs files for a device
>         * which is undergoing removal.
>         */
>                                  parent_remove_sysfs_files()

In both cases above, it looks like the device will hold a reference to
the parent, so while there is a race, the parent object isn't released.

> 
> 5. Below crash is observed when user initiated remove is in progress
> and mdev_unregister_driver() completes parent unregistration.
> 
>        cpu-0                         cpu-1
>        -----                         -----
> remove_store()
>    mdev_device_remove()
>    active = false;
>                                   mdev_unregister_device()
>                                     remove type
>    [...]
>    mdev_remove_ops() crashes.
> 
> This is similar race like create() racing with mdev_unregister_device().

Not sure I catch this, the device should have a reference to the
parent, and we don't specifically clear parent->ops, so what's getting
removed that causes this oops?  Is .remove pointing at bad text
regardless?

> mtty mtty: MDEV: Registered
> iommu: Adding device 83b8f4f2-509f-382f-3c1e-e6bfe0fa1001 to group 57
> vfio_mdev 83b8f4f2-509f-382f-3c1e-e6bfe0fa1001: MDEV: group_id = 57
> mdev_device_remove sleep started
> mtty mtty: MDEV: Unregistering
> mtty_dev: Unloaded!
> BUG: unable to handle kernel paging request at ffffffffc027d668
> PGD af9818067 P4D af9818067 PUD af981a067 PMD 8583c3067 PTE 0
> Oops: 0000 [#1] SMP PTI
> CPU: 15 PID: 3517 Comm: bash Kdump: loaded Not tainted 5.0.0-rc7-vdevbus+ #2
> Hardware name: Supermicro SYS-6028U-TR4+/X10DRU-i+, BIOS 2.0b 08/09/2016
> RIP: 0010:mdev_device_remove_ops+0x1a/0x50 [mdev]
> Call Trace:
>  mdev_device_remove+0xef/0x130 [mdev]
>  remove_store+0x77/0xa0 [mdev]
>  kernfs_fop_write+0x113/0x1a0
>  __vfs_write+0x33/0x1b0
>  ? rcu_read_lock_sched_held+0x64/0x70
>  ? rcu_sync_lockdep_assert+0x2a/0x50
>  ? __sb_start_write+0x121/0x1b0
>  ? vfs_write+0x17c/0x1b0
>  vfs_write+0xad/0x1b0
>  ? trace_hardirqs_on_thunk+0x1a/0x1c
>  ksys_write+0x55/0xc0
>  do_syscall_64+0x5a/0x210
> 
> Therefore, mdev core is improved in following ways to overcome above
> issues.
> 
> 1. Before placing mdev devices on the bus, perform vendor drivers
> creation which supports the mdev creation.
> This ensures that mdev specific all necessary fields are initialized
> before a given mdev can be accessed by bus driver.
> 
> 2. During remove flow, first remove the device from the bus. This
> ensures that any bus specific devices and data is cleared.
> Once device is taken of the mdev bus, perform remove() of mdev from the
> vendor driver.
> 
> 3. Linux core device model provides way to register and auto unregister
> the device sysfs attribute groups at dev->groups.
> Make use of this groups to let core create the groups and simplify code
> to avoid explicit groups creation and removal.
> 
> 4. Wait for any ongoing mdev create() and remove() to finish before
> unregistering parent device using srcu. This continues to allow multiple
> create and remove to progress in parallel. At the same time guard parent
> removal while parent is being access by create() and remove callbacks.

So there should be 4-5 separate patches here?  Wishful thinking?

> Fixes: 7b96953bc640 ("vfio: Mediated device Core driver")
> Signed-off-by: Parav Pandit <parav@xxxxxxxxxxxx>
> ---
>  drivers/vfio/mdev/mdev_core.c    | 142 +++++++++++++++++++++------------------
>  drivers/vfio/mdev/mdev_private.h |   7 +-
>  drivers/vfio/mdev/mdev_sysfs.c   |   6 +-
>  3 files changed, 84 insertions(+), 71 deletions(-)
> 
> diff --git a/drivers/vfio/mdev/mdev_core.c b/drivers/vfio/mdev/mdev_core.c
> index 944a058..8fe0ed1 100644
> --- a/drivers/vfio/mdev/mdev_core.c
> +++ b/drivers/vfio/mdev/mdev_core.c
> @@ -84,6 +84,7 @@ static void mdev_release_parent(struct kref *kref)
>  						  ref);
>  	struct device *dev = parent->dev;
>  
> +	cleanup_srcu_struct(&parent->unreg_srcu);
>  	kfree(parent);
>  	put_device(dev);
>  }
> @@ -103,56 +104,30 @@ static inline void mdev_put_parent(struct mdev_parent *parent)
>  		kref_put(&parent->ref, mdev_release_parent);
>  }
>  
> -static int mdev_device_create_ops(struct kobject *kobj,
> -				  struct mdev_device *mdev)
> +static int mdev_device_must_remove(struct mdev_device *mdev)

Naming is off here, mdev_device_remove_common()?

>  {
> -	struct mdev_parent *parent = mdev->parent;
> +	struct mdev_parent *parent;
> +	struct mdev_type *type;
>  	int ret;
>  
> -	ret = parent->ops->create(kobj, mdev);
> -	if (ret)
> -		return ret;
> +	type = to_mdev_type(mdev->type_kobj);
>  
> -	ret = sysfs_create_groups(&mdev->dev.kobj,
> -				  parent->ops->mdev_attr_groups);
> +	mdev_remove_sysfs_files(&mdev->dev, type);
> +	device_del(&mdev->dev);
> +	parent = mdev->parent;
> +	ret = parent->ops->remove(mdev);
>  	if (ret)
> -		parent->ops->remove(mdev);
> +		dev_err(&mdev->dev, "Remove failed: err=%d\n", ret);

Let the caller decide whether to be verbose with the error, parent
removal might want to warn, sysfs remove might just return an error.

>  
> +	/* Balances with device_initialize() */
> +	put_device(&mdev->dev);
>  	return ret;
>  }
>  
> -/*
> - * mdev_device_remove_ops gets called from sysfs's 'remove' and when parent
> - * device is being unregistered from mdev device framework.
> - * - 'force_remove' is set to 'false' when called from sysfs's 'remove' which
> - *   indicates that if the mdev device is active, used by VMM or userspace
> - *   application, vendor driver could return error then don't remove the device.
> - * - 'force_remove' is set to 'true' when called from mdev_unregister_device()
> - *   which indicate that parent device is being removed from mdev device
> - *   framework so remove mdev device forcefully.
> - */
> -static int mdev_device_remove_ops(struct mdev_device *mdev, bool force_remove)
> -{
> -	struct mdev_parent *parent = mdev->parent;
> -	int ret;
> -
> -	/*
> -	 * Vendor driver can return error if VMM or userspace application is
> -	 * using this mdev device.
> -	 */
> -	ret = parent->ops->remove(mdev);
> -	if (ret && !force_remove)
> -		return ret;
> -
> -	sysfs_remove_groups(&mdev->dev.kobj, parent->ops->mdev_attr_groups);
> -	return 0;
> -}

Seems like there's easily a separate patch in pushing the create/remove
ops into the calling function and separating for the iterator callback,
that would make this easier to review.

> -
>  static int mdev_device_remove_cb(struct device *dev, void *data)
>  {
>  	if (dev_is_mdev(dev))
> -		mdev_device_remove(dev, true);
> -
> +		mdev_device_must_remove(to_mdev_device(dev));
>  	return 0;
>  }
>  
> @@ -194,6 +169,7 @@ int mdev_register_device(struct device *dev, const struct mdev_parent_ops *ops)
>  	}
>  
>  	kref_init(&parent->ref);
> +	init_srcu_struct(&parent->unreg_srcu);
>  
>  	parent->dev = dev;
>  	parent->ops = ops;
> @@ -214,6 +190,7 @@ int mdev_register_device(struct device *dev, const struct mdev_parent_ops *ops)
>  	if (ret)
>  		dev_warn(dev, "Failed to create compatibility class link\n");
>  
> +	rcu_assign_pointer(parent->self, parent);
>  	list_add(&parent->next, &parent_list);
>  	mutex_unlock(&parent_list_lock);
>  
> @@ -244,21 +221,36 @@ void mdev_unregister_device(struct device *dev)
>  
>  	mutex_lock(&parent_list_lock);
>  	parent = __find_parent_device(dev);
> -
>  	if (!parent) {
>  		mutex_unlock(&parent_list_lock);
>  		return;
>  	}
> +	list_del(&parent->next);
> +	mutex_unlock(&parent_list_lock);
> +
>  	dev_info(dev, "MDEV: Unregistering\n");
>  
> -	list_del(&parent->next);
> +	/* Publish that this mdev parent is unregistering. So any new
> +	 * create/remove cannot start on this parent anymore by user.
> +	 */

Comment style, we're not in netdev.

> +	rcu_assign_pointer(parent->self, NULL);
> +
> +	/*
> +	 * Wait for any active create() or remove() mdev ops on the parent
> +	 * to complete.
> +	 */
> +	synchronize_srcu(&parent->unreg_srcu);
> +
> +	/* At this point it is confirmed that any pending user initiated
> +	 * create or remove callbacks accessing the parent are completed.
> +	 * It is safe to remove the parent now.
> +	 */
>  	class_compat_remove_link(mdev_bus_compat_class, dev, NULL);
>  
>  	device_for_each_child(dev, NULL, mdev_device_remove_cb);
>  
>  	parent_remove_sysfs_files(parent);
>  
> -	mutex_unlock(&parent_list_lock);
>  	mdev_put_parent(parent);
>  }
>  EXPORT_SYMBOL(mdev_unregister_device);
> @@ -278,14 +270,24 @@ static void mdev_device_release(struct device *dev)
>  int mdev_device_create(struct kobject *kobj, struct device *dev, uuid_le uuid)
>  {
>  	int ret;
> +	struct mdev_parent *valid_parent;
>  	struct mdev_device *mdev, *tmp;
>  	struct mdev_parent *parent;
>  	struct mdev_type *type = to_mdev_type(kobj);
> +	int srcu_idx;
>  
>  	parent = mdev_get_parent(type->parent);
>  	if (!parent)
>  		return -EINVAL;
>  
> +	srcu_idx = srcu_read_lock(&parent->unreg_srcu);
> +	valid_parent = srcu_dereference(parent->self, &parent->unreg_srcu);
> +	if (!valid_parent) {
> +		/* parent is undergoing unregistration */
> +		ret = -ENODEV;
> +		goto mdev_fail;
> +	}
> +
>  	mutex_lock(&mdev_list_lock);
>  
>  	/* Check for duplicate */
> @@ -310,68 +312,76 @@ int mdev_device_create(struct kobject *kobj, struct device *dev, uuid_le uuid)
>  
>  	mdev->parent = parent;
>  
> +	device_initialize(&mdev->dev);
>  	mdev->dev.parent  = dev;
>  	mdev->dev.bus     = &mdev_bus_type;
>  	mdev->dev.release = mdev_device_release;
> +	mdev->dev.groups = type->parent->ops->mdev_attr_groups;
>  	dev_set_name(&mdev->dev, "%pUl", uuid.b);
>  
> -	ret = device_register(&mdev->dev);
> +	ret = type->parent->ops->create(kobj, mdev);
>  	if (ret)
> -		goto mdev_fail;
> +		goto create_fail;
>  
> -	ret = mdev_device_create_ops(kobj, mdev);
> +	ret = device_add(&mdev->dev);

Separating device_initialize() and device_add() also looks like a
separate patch, then the srcu could be added at the end.  Thanks,

Alex

>  	if (ret)
> -		goto create_fail;
> +		goto dev_fail;
>  
>  	ret = mdev_create_sysfs_files(&mdev->dev, type);
> -	if (ret) {
> -		mdev_device_remove_ops(mdev, true);
> -		goto create_fail;
> -	}
> +	if (ret)
> +		goto sysfs_fail;
>  
>  	mdev->type_kobj = kobj;
>  	mdev->active = true;
>  	dev_dbg(&mdev->dev, "MDEV: created\n");
> +	srcu_read_unlock(&parent->unreg_srcu, srcu_idx);
>  
>  	return 0;
>  
> +sysfs_fail:
> +	device_del(&mdev->dev);
> +dev_fail:
> +	type->parent->ops->remove(mdev);
>  create_fail:
> -	device_unregister(&mdev->dev);
> +	put_device(&mdev->dev);
>  mdev_fail:
> +	srcu_read_unlock(&parent->unreg_srcu, srcu_idx);
>  	mdev_put_parent(parent);
>  	return ret;
>  }
>  
> -int mdev_device_remove(struct device *dev, bool force_remove)
> +int mdev_device_remove(struct device *dev)
>  {
> +	struct mdev_parent *valid_parent;
>  	struct mdev_device *mdev;
>  	struct mdev_parent *parent;
> -	struct mdev_type *type;
> +	int srcu_idx;
>  	int ret;
>  
>  	mdev = to_mdev_device(dev);
> +	parent = mdev->parent;
> +	srcu_idx = srcu_read_lock(&parent->unreg_srcu);
> +	valid_parent = srcu_dereference(parent->self, &parent->unreg_srcu);
> +	if (!valid_parent) {
> +		srcu_read_unlock(&parent->unreg_srcu, srcu_idx);
> +		/* parent is undergoing unregistration */
> +		return -ENODEV;
> +	}
> +
> +	mutex_lock(&mdev_list_lock);
>  	if (!mdev->active) {
>  		mutex_unlock(&mdev_list_lock);
> -		return -EAGAIN;
> +		srcu_read_unlock(&parent->unreg_srcu, srcu_idx);
> +		return -ENODEV;
>  	}
> -
>  	mdev->active = false;
>  	mutex_unlock(&mdev_list_lock);
>  
> -	type = to_mdev_type(mdev->type_kobj);
> -	parent = mdev->parent;
> -
> -	ret = mdev_device_remove_ops(mdev, force_remove);
> -	if (ret) {
> -		mdev->active = true;
> -		return ret;
> -	}
> +	ret = mdev_device_must_remove(mdev);
> +	srcu_read_unlock(&parent->unreg_srcu, srcu_idx);
>  
> -	mdev_remove_sysfs_files(dev, type);
> -	device_unregister(dev);
>  	mdev_put_parent(parent);
> -
> -	return 0;
> +	return ret;
>  }
>  
>  static int __init mdev_init(void)
> diff --git a/drivers/vfio/mdev/mdev_private.h b/drivers/vfio/mdev/mdev_private.h
> index 84b2b6c..3d17db9 100644
> --- a/drivers/vfio/mdev/mdev_private.h
> +++ b/drivers/vfio/mdev/mdev_private.h
> @@ -23,6 +23,11 @@ struct mdev_parent {
>  	struct list_head next;
>  	struct kset *mdev_types_kset;
>  	struct list_head type_list;
> +	/* Protects unregistration to wait until create/remove
> +	 * are completed.
> +	 */
> +	struct srcu_struct unreg_srcu;
> +	struct mdev_parent __rcu *self;
>  };
>  
>  struct mdev_device {
> @@ -58,6 +63,6 @@ struct mdev_type {
>  void mdev_remove_sysfs_files(struct device *dev, struct mdev_type *type);
>  
>  int  mdev_device_create(struct kobject *kobj, struct device *dev, uuid_le uuid);
> -int  mdev_device_remove(struct device *dev, bool force_remove);
> +int  mdev_device_remove(struct device *dev);
>  
>  #endif /* MDEV_PRIVATE_H */
> diff --git a/drivers/vfio/mdev/mdev_sysfs.c b/drivers/vfio/mdev/mdev_sysfs.c
> index c782fa9..68a8191 100644
> --- a/drivers/vfio/mdev/mdev_sysfs.c
> +++ b/drivers/vfio/mdev/mdev_sysfs.c
> @@ -236,11 +236,9 @@ static ssize_t remove_store(struct device *dev, struct device_attribute *attr,
>  	if (val && device_remove_file_self(dev, attr)) {
>  		int ret;
>  
> -		ret = mdev_device_remove(dev, false);
> -		if (ret) {
> -			device_create_file(dev, attr);
> +		ret = mdev_device_remove(dev);
> +		if (ret)
>  			return ret;
> -		}
>  	}
>  
>  	return count;




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux