On Thu, Mar 14, 2019 at 08:11:17AM +0100, Cédric Le Goater wrote:
> On 3/14/19 3:32 AM, David Gibson wrote:
> > On Wed, Mar 13, 2019 at 10:40:19AM +0100, Cédric Le Goater wrote:
> >> On 2/26/19 6:24 AM, Paul Mackerras wrote:
> >>> On Fri, Feb 22, 2019 at 12:28:30PM +0100, Cédric Le Goater wrote:
> >>>> These controls will be used by the H_INT_SET_QUEUE_CONFIG and
> >>>> H_INT_GET_QUEUE_CONFIG hcalls from QEMU. They will also be used to
> >>>> restore the configuration of the XIVE EQs in the KVM device and to
> >>>> capture the internal runtime state of the EQs. Both 'get' and 'set'
> >>>> rely on an OPAL call to access from the XIVE interrupt controller the
> >>>> EQ toggle bit and EQ index which are updated by the HW when event
> >>>> notifications are enqueued in the EQ.
> >>>>
> >>>> The value of the guest physical address of the event queue is saved in
> >>>> the XIVE internal xive_q structure for later use. That is when
> >>>> migration needs to mark the EQ pages dirty to capture a consistent
> >>>> memory state of the VM.
> >>>>
> >>>> To be noted that H_INT_SET_QUEUE_CONFIG does not require the extra
> >>>> OPAL call setting the EQ toggle bit and EQ index to configure the EQ,
> >>>> but restoring the EQ state will.
> >>>
> >>> [snip]
> >>>
> >>>> +/* Layout of 64-bit eq attribute */
> >>>> +#define KVM_XIVE_EQ_PRIORITY_SHIFT 0
> >>>> +#define KVM_XIVE_EQ_PRIORITY_MASK 0x7
> >>>> +#define KVM_XIVE_EQ_SERVER_SHIFT 3
> >>>> +#define KVM_XIVE_EQ_SERVER_MASK 0xfffffff8ULL
> >>>> +
> >>>> +/* Layout of 64-bit eq attribute values */
> >>>> +struct kvm_ppc_xive_eq {
> >>>> + __u32 flags;
> >>>> + __u32 qsize;
> >>>> + __u64 qpage;
> >>>> + __u32 qtoggle;
> >>>> + __u32 qindex;
> >>>> + __u8 pad[40];
> >>>> +};
> >>>
> >>> This is confusing. What's the difference between an "eq attribute"
> >>> and an "eq attribute value"? Is the first actually a queue index or
> >>> a queue identifier?
> >>
> >> The "attribute" qualifier comes from the {get,set,has}_addr methods
> >> of the KVM device. But it is not a well chosen name for the group
> >> KVM_DEV_XIVE_GRP_EQ_CONFIG.
> >>
> >> I should be using "eq identifier" and "eq values" or "eq state".
> >
> > Yeah, that seems clearer.
> >
> >>> Also, the kvm_ppc_xive_eq is not 64 bits, so the comment above it is
> >>> wrong. Maybe you meant "64-byte"?
> >>
> >> That was a bad copy paste. I have padded the structure to twice the size
> >> of the XIVE END (the XIVE EQ descriptor in HW) which size is 32 bytes.
> >> I thought that one extra u64 was not enough room for future.
> >>
> >>>
> >>> [snip]
> >>>
> >>>> + page = gfn_to_page(kvm, gpa_to_gfn(kvm_eq.qpage));
> >>>> + if (is_error_page(page)) {
> >>>> + pr_warn("Couldn't get guest page for %llx!\n", kvm_eq.qpage);
> >>>> + return -ENOMEM;
> >>>> + }
> >>>> + qaddr = page_to_virt(page) + (kvm_eq.qpage & ~PAGE_MASK);
> >>>
> >>> Isn't this assuming that we can map the whole queue with a single
> >>> gfn_to_page? That would only be true if kvm_eq.qsize <= PAGE_SHIFT.
> >>> What happens if kvm_eq.qsize > PAGE_SHIFT?
> >>
> >> Ah yes. Theoretically, it should not happen because we only advertise
> >> 64K in the DT for the moment. I should at least add a check. So I will
> >> change the helper xive_native_validate_queue_size() to return -EINVAL
> >> for other page sizes.
> >
> > Ok.
> >
> >> Do you think it would be complex to support XIVE EQs using a page larger
> >> than the default one on the guest ?
> >
> > Hm. The queue has to be physically contiguous from the host point of
> > view, in order for the XIVE hardware to write to it, doesn't it? If
> > so then supporting queues bigger than the guest page size would be
> > very difficult.
>
> The queue is only *one* page.
Right, but it's one *host* page, right, which is by nature host
physically contiguous. If the guest page size is different a single
guest page might not be host physically contiguous.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
Attachment:
signature.asc
Description: PGP signature
