Re: [PATCH v6 19/27] kvm: Adapt assembly for PIE support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 31, 2019 at 11:24:26AM -0800, Thomas Garnier wrote:
> Change the assembly code to use only relative references of symbols for the
> kernel to be PIE compatible. The new __ASM_MOVABS macro is used to
> get the address of a symbol on both 32 and 64-bit with PIE support.
> 
> Position Independent Executable (PIE) support will allow to extend the
> KASLR randomization range below 0xffffffff80000000.
> 
> Signed-off-by: Thomas Garnier <thgarnie@xxxxxxxxxxxx>
> ---
>  arch/x86/include/asm/kvm_host.h | 8 ++++++--
>  arch/x86/kernel/kvm.c           | 6 ++++--
>  arch/x86/kvm/svm.c              | 4 ++--
>  arch/x86/kvm/vmx/vmx.c          | 2 +-
>  4 files changed, 13 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index 4660ce90de7f..fdb3307d5fe1 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -1498,9 +1498,13 @@ asmlinkage void kvm_spurious_fault(void);
>  	".pushsection .fixup, \"ax\" \n" \
>  	"667: \n\t" \
>  	cleanup_insn "\n\t"		      \
> -	"cmpb $0, kvm_rebooting \n\t"	      \
> +	"cmpb $0, kvm_rebooting" __ASM_SEL(, (%%rip)) " \n\t" \
>  	"jne 668b \n\t"      		      \
> -	__ASM_SIZE(push) " $666b \n\t"	      \
> +	__ASM_SIZE(push) "$0 \n\t"		\
> +	__ASM_SIZE(push) "%%" _ASM_AX " \n\t"		\
> +	_ASM_MOVABS " $666b, %%" _ASM_AX "\n\t"	\
> +	_ASM_MOV " %%" _ASM_AX ", " __ASM_SEL(4, 8) "(%%" _ASM_SP ") \n\t" \
> +	__ASM_SIZE(pop) "%%" _ASM_AX " \n\t"		\

This blob isn't very intuitive to begin with, and the extra stack
shenanigans are a bit much when PIE is disabled.  What about breaking
out the behavior to separate helper macros to keep the simpler code
for non-PIE and to make the code somewhat self-documenting?  E.g.:

#ifndef CONFIG_X86_PIE
#define KVM_PUSH_FAULTING_INSN_RIP	 __ASM_SIZE(push) " $666b \n\t"
#else
#define KVM_PUSH_FAULTING_INSN_RIP					   \
	__ASM_SIZE(push) "$0 \n\t"					   \
	__ASM_SIZE(push) "%%" _ASM_AX " \n\t"				   \
	_ASM_MOVABS " $666b, %%" _ASM_AX "\n\t"				   \
	_ASM_MOV " %%" _ASM_AX ", " __ASM_SEL(4, 8) "(%%" _ASM_SP ") \n\t" \
	__ASM_SIZE(pop) "%%" _ASM_AX " \n\t"
#endif

#define ____kvm_handle_fault_on_reboot(insn, cleanup_insn)	\
	"666: " insn "\n\t" \
	"668: \n\t"                           \
	".pushsection .fixup, \"ax\" \n" \
	"667: \n\t" \
	cleanup_insn "\n\t"		      \
	"cmpb $0, kvm_rebooting" __ASM_SEL(, (%%rip)) " \n\t" \
	"jne 668b \n\t"      		      \
	KVM_PUSH_FAULTING_INSN_RIP		\
	"jmp kvm_spurious_fault \n\t"	      \
	".popsection \n\t" \
	_ASM_EXTABLE(666b, 667b)

>  	"jmp kvm_spurious_fault \n\t"	      \
>  	".popsection \n\t" \
>  	_ASM_EXTABLE(666b, 667b)
> diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
> index 5c93a65ee1e5..f6eb02004e43 100644
> --- a/arch/x86/kernel/kvm.c
> +++ b/arch/x86/kernel/kvm.c

This change to arch/x86/kernel/kvm.c should be done in a separate patch
as it affects the kernel itself when running as a guest under KVM,
whereas arch/x86/kvm/**/* and arch/x86/include/asm/kvm_host.h affect
KVM as a host, i.e. the KVM module.  Case in point, the below bug causes
a kernel panic when running as a KVM guest but has no impact on the KVM
module.

> @@ -826,8 +826,10 @@ asm(
>  ".global __raw_callee_save___kvm_vcpu_is_preempted;"
>  ".type __raw_callee_save___kvm_vcpu_is_preempted, @function;"
>  "__raw_callee_save___kvm_vcpu_is_preempted:"
> -"movq	__per_cpu_offset(,%rdi,8), %rax;"
> -"cmpb	$0, " __stringify(KVM_STEAL_TIME_preempted) "+steal_time(%rax);"
> +"leaq	__per_cpu_offset(%rip), %rax;"
> +"movq	(%rax,%rdi,8), %rax;"
> +"addq	" __stringify(KVM_STEAL_TIME_preempted) "+steal_time(%rip), %rax;"

This is wrong, it's directly accessing the per-cpu offset of 'steal_time'
as a virtual address, e.g. without PIE enabled:

    0xffffffff8104820b <+11>:    add    0x7efccffe(%rip),%rax        # 0x15210 <steal_time+16>

This results in kernel panics due to unhandled page faults:

    [    0.001453] BUG: unable to handle kernel paging request at 0000000000015210
    [    0.001453] #PF error: [normal kernel read fault]

I think you want something like the following, except that the whole
point of handcoded assembly is to avoid modifying registers other than
RAX, i.e. modifying RDI is a no-no.

    "leaq   " __stringify(KVM_STEAL_TIME_preempted) "+steal_time(%rip), %rdi;"
    "cmpb   $0, (%rax,%rdi,1);"


And similar to the comment on ____kvm_handle_fault_on_reboot(), what
about wrapping the PIE-specific version in an ifdef?

> +"cmpb	$0, (%rax);"
>  "setne	%al;"
>  "ret;"
>  ".popsection");
> diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
> index f13a3a24d360..26abb82b1b67 100644
> --- a/arch/x86/kvm/svm.c
> +++ b/arch/x86/kvm/svm.c
> @@ -706,12 +706,12 @@ static u32 svm_msrpm_offset(u32 msr)
>  
>  static inline void clgi(void)
>  {
> -	asm volatile (__ex("clgi"));
> +	asm volatile (__ex("clgi") : :);
>  }
>  
>  static inline void stgi(void)
>  {
> -	asm volatile (__ex("stgi"));
> +	asm volatile (__ex("stgi") : :);
>  }
>  
>  static inline void invlpga(unsigned long addr, u32 asid)
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index 4341175339f3..3275761a7375 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -2161,7 +2161,7 @@ static void vmclear_local_loaded_vmcss(void)
>   */
>  static void kvm_cpu_vmxoff(void)
>  {
> -	asm volatile (__ex("vmxoff"));
> +	asm volatile (__ex("vmxoff") :::);
>  
>  	intel_pt_handle_vmx(0);
>  	cr4_clear_bits(X86_CR4_VMXE);
> -- 
> 2.20.1.495.gaa96b0ce6b-goog
> 



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux