[PATCH 27/29] KVM: VMX: Use RAX as the scratch register during vCPU-run

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Prepare for making __vmx_vcpu_run() callable from C code.  That means
returning the result in RAX.  Since RAX will be used to return the
result, use it as the scratch register as well to make the code readable
and to document that the scratch register is more more less arbitrary.

Signed-off-by: Sean Christopherson <sean.j.christopherson@xxxxxxxxx>
---
 arch/x86/kvm/vmx/vmenter.S | 82 +++++++++++++++++++-------------------
 1 file changed, 41 insertions(+), 41 deletions(-)

diff --git a/arch/x86/kvm/vmx/vmenter.S b/arch/x86/kvm/vmx/vmenter.S
index 0a0d6f2c1e8c..45e3e381d41d 100644
--- a/arch/x86/kvm/vmx/vmenter.S
+++ b/arch/x86/kvm/vmx/vmenter.S
@@ -102,31 +102,31 @@ ENTRY(__vmx_vcpu_run)
 	lea -WORD_SIZE(%_ASM_SP), %_ASM_ARG2
 	call vmx_update_host_rsp
 
-	/* Load @regs to RCX. */
-	mov (%_ASM_SP), %_ASM_CX
+	/* Load @regs to RAX. */
+	mov (%_ASM_SP), %_ASM_AX
 
 	/* Check if vmlaunch or vmresume is needed */
 	cmpb $0, %bl
 
 	/* Load guest registers.  Don't clobber flags. */
-	mov VCPU_RAX(%_ASM_CX), %_ASM_AX
-	mov VCPU_RBX(%_ASM_CX), %_ASM_BX
-	mov VCPU_RDX(%_ASM_CX), %_ASM_DX
-	mov VCPU_RSI(%_ASM_CX), %_ASM_SI
-	mov VCPU_RDI(%_ASM_CX), %_ASM_DI
-	mov VCPU_RBP(%_ASM_CX), %_ASM_BP
+	mov VCPU_RBX(%_ASM_AX), %_ASM_BX
+	mov VCPU_RCX(%_ASM_AX), %_ASM_CX
+	mov VCPU_RDX(%_ASM_AX), %_ASM_DX
+	mov VCPU_RSI(%_ASM_AX), %_ASM_SI
+	mov VCPU_RDI(%_ASM_AX), %_ASM_DI
+	mov VCPU_RBP(%_ASM_AX), %_ASM_BP
 #ifdef CONFIG_X86_64
-	mov VCPU_R8 (%_ASM_CX),  %r8
-	mov VCPU_R9 (%_ASM_CX),  %r9
-	mov VCPU_R10(%_ASM_CX), %r10
-	mov VCPU_R11(%_ASM_CX), %r11
-	mov VCPU_R12(%_ASM_CX), %r12
-	mov VCPU_R13(%_ASM_CX), %r13
-	mov VCPU_R14(%_ASM_CX), %r14
-	mov VCPU_R15(%_ASM_CX), %r15
+	mov VCPU_R8 (%_ASM_AX),  %r8
+	mov VCPU_R9 (%_ASM_AX),  %r9
+	mov VCPU_R10(%_ASM_AX), %r10
+	mov VCPU_R11(%_ASM_AX), %r11
+	mov VCPU_R12(%_ASM_AX), %r12
+	mov VCPU_R13(%_ASM_AX), %r13
+	mov VCPU_R14(%_ASM_AX), %r14
+	mov VCPU_R15(%_ASM_AX), %r15
 #endif
-	/* Load guest RCX.  This kills the vmx_vcpu pointer! */
-	mov VCPU_RCX(%_ASM_CX), %_ASM_CX
+	/* Load guest RAX.  This kills the vmx_vcpu pointer! */
+	mov VCPU_RAX(%_ASM_AX), %_ASM_AX
 
 	/* Enter guest mode */
 	call vmx_vmenter
@@ -134,29 +134,29 @@ ENTRY(__vmx_vcpu_run)
 	/* Jump on VM-Fail. */
 	jbe 2f
 
-	/* Temporarily save guest's RCX. */
-	push %_ASM_CX
+	/* Temporarily save guest's RAX. */
+	push %_ASM_AX
 
-	/* Reload @regs to RCX. */
-	mov WORD_SIZE(%_ASM_SP), %_ASM_CX
+	/* Reload @regs to RAX. */
+	mov WORD_SIZE(%_ASM_SP), %_ASM_AX
 
-	/* Save all guest registers, including RCX from the stack */
-	mov %_ASM_AX,   VCPU_RAX(%_ASM_CX)
-	mov %_ASM_BX,   VCPU_RBX(%_ASM_CX)
-	__ASM_SIZE(pop) VCPU_RCX(%_ASM_CX)
-	mov %_ASM_DX,   VCPU_RDX(%_ASM_CX)
-	mov %_ASM_SI,   VCPU_RSI(%_ASM_CX)
-	mov %_ASM_DI,   VCPU_RDI(%_ASM_CX)
-	mov %_ASM_BP,   VCPU_RBP(%_ASM_CX)
+	/* Save all guest registers, including RAX from the stack */
+	__ASM_SIZE(pop) VCPU_RAX(%_ASM_AX)
+	mov %_ASM_BX,   VCPU_RBX(%_ASM_AX)
+	mov %_ASM_CX,   VCPU_RCX(%_ASM_AX)
+	mov %_ASM_DX,   VCPU_RDX(%_ASM_AX)
+	mov %_ASM_SI,   VCPU_RSI(%_ASM_AX)
+	mov %_ASM_DI,   VCPU_RDI(%_ASM_AX)
+	mov %_ASM_BP,   VCPU_RBP(%_ASM_AX)
 #ifdef CONFIG_X86_64
-	mov %r8,  VCPU_R8 (%_ASM_CX)
-	mov %r9,  VCPU_R9 (%_ASM_CX)
-	mov %r10, VCPU_R10(%_ASM_CX)
-	mov %r11, VCPU_R11(%_ASM_CX)
-	mov %r12, VCPU_R12(%_ASM_CX)
-	mov %r13, VCPU_R13(%_ASM_CX)
-	mov %r14, VCPU_R14(%_ASM_CX)
-	mov %r15, VCPU_R15(%_ASM_CX)
+	mov %r8,  VCPU_R8 (%_ASM_AX)
+	mov %r9,  VCPU_R9 (%_ASM_AX)
+	mov %r10, VCPU_R10(%_ASM_AX)
+	mov %r11, VCPU_R11(%_ASM_AX)
+	mov %r12, VCPU_R12(%_ASM_AX)
+	mov %r13, VCPU_R13(%_ASM_AX)
+	mov %r14, VCPU_R14(%_ASM_AX)
+	mov %r15, VCPU_R15(%_ASM_AX)
 #endif
 
 	/* Clear EBX to indicate VM-Exit (as opposed to VM-Fail). */
@@ -177,7 +177,7 @@ ENTRY(__vmx_vcpu_run)
 	xor %r14d, %r14d
 	xor %r15d, %r15d
 #endif
-	xor %eax, %eax
+	xor %ecx, %ecx
 	xor %edx, %edx
 	xor %esi, %esi
 	xor %edi, %edi
@@ -190,9 +190,9 @@ ENTRY(__vmx_vcpu_run)
 	/* VM-Fail.  Out-of-line to avoid a taken Jcc after VM-Exit. */
 2:	mov $1, %ebx
 	/*
-	 * RCX holds a guest value and it's not cleared in the common
+	 * RAX holds a guest value and it's not cleared in the common
 	 * exit path as VM-Exit reloads it with the vcpu_vmx pointer.
 	 */
-	xor %ecx, %ecx
+	xor %eax, %eax
 	jmp 1b
 ENDPROC(__vmx_vcpu_run)
-- 
2.20.1




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux