Re: [PATCH v5 1/8] iommu: Add APIs for multiple domains per device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 10 Jan 2019 11:00:20 +0800
Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx> wrote:

> Sharing a physical PCI device in a finer-granularity way
> is becoming a consensus in the industry. IOMMU vendors
> are also engaging efforts to support such sharing as well
> as possible. Among the efforts, the capability of support
> finer-granularity DMA isolation is a common requirement
> due to the security consideration. With finer-granularity
> DMA isolation, all DMA requests out of or to a subset of
> a physical PCI device can be protected by the IOMMU. As a
> result, there is a request in software to attach multiple
> domains to a physical PCI device. One example of such use
> model is the Intel Scalable IOV [1] [2]. The Intel vt-d
> 3.0 spec [3] introduces the scalable mode which enables
> PASID granularity DMA isolation.
> 
> This adds the APIs to support multiple domains per device.
> In order to ease the discussions, we call it 'a domain in
> auxiliary mode' or simply 'auxiliary domain' when multiple
> domains are attached to a physical device.
> 
> The APIs include:
> 
> * iommu_dev_has_feature(dev, IOMMU_DEV_FEAT_AUX)
>   - Check whether both IOMMU and device support IOMMU aux
>     domain feature. Below aux-domain specific interfaces
>     are available only after this returns true.
> 
> * iommu_dev_enable/disable_feature(dev, IOMMU_DEV_FEAT_AUX)
>   - Enable/disable device specific aux-domain feature.
> 
> * iommu_aux_attach_device(domain, dev)
>   - Attaches @domain to @dev in the auxiliary mode. Multiple
>     domains could be attached to a single device in the
>     auxiliary mode with each domain representing an isolated
>     address space for an assignable subset of the device.
> 
> * iommu_aux_detach_device(domain, dev)
>   - Detach @domain which has been attached to @dev in the
>     auxiliary mode.
> 
> * iommu_aux_get_pasid(domain, dev)
>   - Return ID used for finer-granularity DMA translation.
>     For the Intel Scalable IOV usage model, this will be
>     a PASID. The device which supports Scalable IOV needs
>     to write this ID to the device register so that DMA
>     requests could be tagged with a right PASID prefix.
> 
> This has been updated with the latest proposal from Joerg
> posted here [5].
> 
> Many people involved in discussions of this design.
> 
> Kevin Tian <kevin.tian@xxxxxxxxx>
> Liu Yi L <yi.l.liu@xxxxxxxxx>
> Ashok Raj <ashok.raj@xxxxxxxxx>
> Sanjay Kumar <sanjay.k.kumar@xxxxxxxxx>
> Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
> Alex Williamson <alex.williamson@xxxxxxxxxx>
> Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
> Joerg Roedel <joro@xxxxxxxxxx>
> 
> and some discussions can be found here [4] [5].
> 
> [1] https://software.intel.com/en-us/download/intel-scalable-io-virtualization-technical-specification
> [2] https://schd.ws/hosted_files/lc32018/00/LC3-SIOV-final.pdf
> [3] https://software.intel.com/en-us/download/intel-virtualization-technology-for-directed-io-architecture-specification
> [4] https://lkml.org/lkml/2018/7/26/4
> [5] https://www.spinics.net/lists/iommu/msg31874.html
> 
> Cc: Ashok Raj <ashok.raj@xxxxxxxxx>
> Cc: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
> Cc: Kevin Tian <kevin.tian@xxxxxxxxx>
> Cc: Liu Yi L <yi.l.liu@xxxxxxxxx>
> Suggested-by: Kevin Tian <kevin.tian@xxxxxxxxx>
> Suggested-by: Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
> Suggested-by: Joerg Roedel <jroedel@xxxxxxx>
> Signed-off-by: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>

One trivial comment inline.

> ---
>  drivers/iommu/iommu.c | 80 +++++++++++++++++++++++++++++++++++++++++++
>  include/linux/iommu.h | 61 +++++++++++++++++++++++++++++++++
>  2 files changed, 141 insertions(+)
> 
> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> index 3ed4db334341..9166b6145409 100644
> --- a/drivers/iommu/iommu.c
> +++ b/drivers/iommu/iommu.c
> @@ -2033,3 +2033,83 @@ int iommu_fwspec_add_ids(struct device *dev, u32 *ids, int num_ids)
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(iommu_fwspec_add_ids);
> +
> +/*
> + * Per device IOMMU features.
> + */
> +bool iommu_dev_has_feature(struct device *dev, enum iommu_dev_features feat)
> +{
> +	const struct iommu_ops *ops = dev->bus->iommu_ops;
> +
> +	if (ops && ops->dev_has_feat)
> +		return ops->dev_has_feat(dev, feat);
> +
> +	return false;
> +}
> +EXPORT_SYMBOL_GPL(iommu_dev_has_feature);
> +
> +int iommu_dev_enable_feature(struct device *dev, enum iommu_dev_features feat)
> +{
> +	const struct iommu_ops *ops = dev->bus->iommu_ops;
> +
> +	if (ops && ops->dev_enable_feat)
> +		return ops->dev_enable_feat(dev, feat);
> +
> +	return -ENODEV;
> +}
> +EXPORT_SYMBOL_GPL(iommu_dev_enable_feature);
> +
> +int iommu_dev_disable_feature(struct device *dev, enum iommu_dev_features feat)
> +{
> +	const struct iommu_ops *ops = dev->bus->iommu_ops;
> +
> +	if (ops && ops->dev_disable_feat)
> +		return ops->dev_disable_feat(dev, feat);
> +
> +	return -ENODEV;
> +}
> +EXPORT_SYMBOL_GPL(iommu_dev_disable_feature);
> +
> +/*
> + * Aux-domain specific attach/detach.
> + *
> + * Only works if iommu_dev_has_feature(dev, IOMMU_DEV_FEAT_AUX) returns true.
> + * Also, as long as domains are attached to a device through this interface,
> + * any tries to call iommu_attach_device() should fail (iommu_detach_device()
> + * can't fail, so we fail on the tryint to re-attach). This should make us safe

when trying to re-attach. (perhaps?)

> + * against a device being attached to a guest as a whole while there are still
> + * pasid users on it (aux and sva).
> + */
> +int iommu_aux_attach_device(struct iommu_domain *domain, struct device *dev)
> +{
> +	int ret = -ENODEV;
> +
> +	if (domain->ops->aux_attach_dev)
> +		ret = domain->ops->aux_attach_dev(domain, dev);
> +
> +	if (!ret)
> +		trace_attach_device_to_domain(dev);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(iommu_aux_attach_device);
> +
> +void iommu_aux_detach_device(struct iommu_domain *domain, struct device *dev)
> +{
> +	if (domain->ops->aux_detach_dev) {
> +		domain->ops->aux_detach_dev(domain, dev);
> +		trace_detach_device_from_domain(dev);
> +	}
> +}
> +EXPORT_SYMBOL_GPL(iommu_aux_detach_device);
> +
> +int iommu_aux_get_pasid(struct iommu_domain *domain, struct device *dev)
> +{
> +	int ret = -ENODEV;
> +
> +	if (domain->ops->aux_get_pasid)
> +		ret = domain->ops->aux_get_pasid(domain, dev);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(iommu_aux_get_pasid);
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index e90da6b6f3d1..f4c3d2a2cc87 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -156,6 +156,11 @@ struct iommu_resv_region {
>  	enum iommu_resv_type	type;
>  };
>  
> +/* Per device IOMMU features */
> +enum iommu_dev_features {
> +	IOMMU_DEV_FEAT_AUX,	/* Aux-domain feature */
> +};
> +
>  #ifdef CONFIG_IOMMU_API
>  
>  /**
> @@ -183,6 +188,10 @@ struct iommu_resv_region {
>   * @domain_window_enable: Configure and enable a particular window for a domain
>   * @domain_window_disable: Disable a particular window for a domain
>   * @of_xlate: add OF master IDs to iommu grouping
> + * @dev_has/enable/disable_feat: per device entries to check/enable/disable
> + *                               iommu specific features.
> + * @aux_attach/detach_dev: aux-domain specific attach/detach entries.
> + * @aux_get_pasid: get the pasid given an aux-domain
>   * @pgsize_bitmap: bitmap of all possible supported page sizes
>   */
>  struct iommu_ops {
> @@ -226,6 +235,16 @@ struct iommu_ops {
>  	int (*of_xlate)(struct device *dev, struct of_phandle_args *args);
>  	bool (*is_attach_deferred)(struct iommu_domain *domain, struct device *dev);
>  
> +	/* Per device IOMMU features */
> +	bool (*dev_has_feat)(struct device *dev, enum iommu_dev_features f);
> +	int (*dev_enable_feat)(struct device *dev, enum iommu_dev_features f);
> +	int (*dev_disable_feat)(struct device *dev, enum iommu_dev_features f);
> +
> +	/* Aux-domain specific attach/detach entries */
> +	int (*aux_attach_dev)(struct iommu_domain *domain, struct device *dev);
> +	void (*aux_detach_dev)(struct iommu_domain *domain, struct device *dev);
> +	int (*aux_get_pasid)(struct iommu_domain *domain, struct device *dev);
> +
>  	unsigned long pgsize_bitmap;
>  };
>  
> @@ -412,6 +431,13 @@ static inline void dev_iommu_fwspec_set(struct device *dev,
>  int iommu_probe_device(struct device *dev);
>  void iommu_release_device(struct device *dev);
>  
> +bool iommu_dev_has_feature(struct device *dev, enum iommu_dev_features feat);
> +int iommu_dev_enable_feature(struct device *dev, enum iommu_dev_features feat);
> +int iommu_dev_disable_feature(struct device *dev, enum iommu_dev_features feat);
> +int iommu_aux_attach_device(struct iommu_domain *domain, struct device *dev);
> +void iommu_aux_detach_device(struct iommu_domain *domain, struct device *dev);
> +int iommu_aux_get_pasid(struct iommu_domain *domain, struct device *dev);
> +
>  #else /* CONFIG_IOMMU_API */
>  
>  struct iommu_ops {};
> @@ -696,6 +722,41 @@ const struct iommu_ops *iommu_ops_from_fwnode(struct fwnode_handle *fwnode)
>  	return NULL;
>  }
>  
> +static inline bool
> +iommu_dev_has_feature(struct device *dev, enum iommu_dev_features feat)
> +{
> +	return false;
> +}
> +
> +static inline int
> +iommu_dev_enable_feature(struct device *dev, enum iommu_dev_features feat)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline int
> +iommu_dev_disable_feature(struct device *dev, enum iommu_dev_features feat)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline int
> +iommu_aux_attach_device(struct iommu_domain *domain, struct device *dev)
> +{
> +	return -ENODEV;
> +}
> +
> +static inline void
> +iommu_aux_detach_device(struct iommu_domain *domain, struct device *dev)
> +{
> +}
> +
> +static inline int
> +iommu_aux_get_pasid(struct iommu_domain *domain, struct device *dev)
> +{
> +	return -ENODEV;
> +}
> +
>  #endif /* CONFIG_IOMMU_API */
>  
>  #ifdef CONFIG_IOMMU_DEBUGFS





[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux