On Tue, Oct 02, 2018 at 06:00:16PM +1000, Paul Mackerras wrote:
> On Tue, Oct 02, 2018 at 05:00:09PM +1000, David Gibson wrote:
> > On Fri, Sep 28, 2018 at 07:45:49PM +1000, Paul Mackerras wrote:
> > > This adds a new hypercall, H_ENTER_NESTED, which is used by a nested
> > > hypervisor to enter one of its nested guests. The hypercall supplies
> > > register values in two structs. Those values are copied by the level 0
> > > (L0) hypervisor (the one which is running in hypervisor mode) into the
> > > vcpu struct of the L1 guest, and then the guest is run until an
> > > interrupt or error occurs which needs to be reported to L1 via the
> > > hypercall return value.
> > >
> > > Currently this assumes that the L0 and L1 hypervisors are the same
> > > endianness, and the structs passed as arguments are in native
> > > endianness. If they are of different endianness, the version number
> > > check will fail and the hcall will be rejected.
> > >
> > > Nested hypervisors do not support indep_threads_mode=N, so this adds
> > > code to print a warning message if the administrator has set
> > > indep_threads_mode=N, and treat it as Y.
> > >
> > > Signed-off-by: Paul Mackerras <paulus@xxxxxxxxxx>
> >
> > [snip]
> > > +/* Register state for entering a nested guest with H_ENTER_NESTED */
> > > +struct hv_guest_state {
> > > + u64 version; /* version of this structure layout */
> > > + u32 lpid;
> > > + u32 vcpu_token;
> > > + /* These registers are hypervisor privileged (at least for writing) */
> > > + u64 lpcr;
> > > + u64 pcr;
> > > + u64 amor;
> > > + u64 dpdes;
> > > + u64 hfscr;
> > > + s64 tb_offset;
> > > + u64 dawr0;
> > > + u64 dawrx0;
> > > + u64 ciabr;
> > > + u64 hdec_expiry;
> > > + u64 purr;
> > > + u64 spurr;
> > > + u64 ic;
> > > + u64 vtb;
> > > + u64 hdar;
> > > + u64 hdsisr;
> > > + u64 heir;
> > > + u64 asdr;
> > > + /* These are OS privileged but need to be set late in guest entry */
> > > + u64 srr0;
> > > + u64 srr1;
> > > + u64 sprg[4];
> > > + u64 pidr;
> > > + u64 cfar;
> > > + u64 ppr;
> > > +};
> >
> > I'm guessing the implication here is that most supervisor privileged
> > registers need to be set by the L1 to the L2 values, before making the
> > H_ENTER_NESTED call. Is that right?
>
> Right - the supervisor privileged registers that are here are the ones
> that the L1 guest needs to have valid at all times (e.g. sprgN), or
> that can get clobbered at any time (e.g. srr0/1), or that can't be
> set to guest values until just before guest entry (cfar, ppr), or that
> are not writable by the supervisor (purr, spurr, dpdes, ic, vtb).
>
> > [snip]
> > > +static int kvmppc_handle_nested_exit(struct kvm_vcpu *vcpu)
> > > +{
> > > + int r;
> > > + int srcu_idx;
> > > +
> > > + vcpu->stat.sum_exits++;
> > > +
> > > + /*
> > > + * This can happen if an interrupt occurs in the last stages
> > > + * of guest entry or the first stages of guest exit (i.e. after
> > > + * setting paca->kvm_hstate.in_guest to KVM_GUEST_MODE_GUEST_HV
> > > + * and before setting it to KVM_GUEST_MODE_HOST_HV).
> > > + * That can happen due to a bug, or due to a machine check
> > > + * occurring at just the wrong time.
> > > + */
> > > + if (vcpu->arch.shregs.msr & MSR_HV) {
> > > + pr_emerg("KVM trap in HV mode while nested!\n");
> > > + pr_emerg("trap=0x%x | pc=0x%lx | msr=0x%llx\n",
> > > + vcpu->arch.trap, kvmppc_get_pc(vcpu),
> > > + vcpu->arch.shregs.msr);
> > > + kvmppc_dump_regs(vcpu);
> > > + return RESUME_HOST;
> >
> > To make sure I'm understanding right here, RESUME_HOST will
> > effectively mean resume the L0, and RESUME_GUEST (without additional
> > processing) will mean resume the L2, right?
>
> RESUME_HOST means resume L1 in fact, and RESUME_GUEST means resume L2.
Hm, ok. A comment saying that might make this easier to read.
> We never go straight out from L2 to L0 because that would leave L1 in
> the middle of a hypercall and we would have to have some sort of extra
> state to record that fact. Instead, if we need to do anything like
> that (e.g. because of a signal pending for the task), we get to the
> point where the H_ENTER_NESTED is finished and the return code is
> stored in L1's r3 before exiting to the L0 userspace.
To clarify.. if an L2 is running, but the L1 vcpu it's running on is
descheduled by the L0, does that mean we have to force an L2 exit to
L1 before we can continued scheduling whatever else on the L0?
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
Attachment:
signature.asc
Description: PGP signature
