Re: [PATCH/RFC v4 1/2] reset: Add support for dedicated reset controls

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

On 9/19/18 3:16 PM, Geert Uytterhoeven wrote:
> Hi Eric,
> 
> On Wed, Sep 19, 2018 at 2:09 PM Auger Eric <eric.auger@xxxxxxxxxx> wrote:
>> On 9/17/18 6:39 PM, Geert Uytterhoeven wrote:
>>> In some SoCs multiple hardware blocks may share a reset control.
>>> The existing reset control API for shared resets will only assert such a
>>> reset when the drivers for all hardware blocks agree.
>>> The existing exclusive reset control API still allows to assert such a
>>> reset, but that impacts all other hardware blocks sharing the reset.
>>>
>>> Sometimes a driver needs to reset a specific hardware block, and be 100%
>>> sure it has no impact on other hardware blocks.  This is e.g. the case
>>> for virtualization with device pass-through, where the host wants to
>>> reset any exported device before and after exporting it for use by the
>>> guest, for isolation.
>>>
>>> Hence a new flag for dedicated resets is added to the internal methods,
>>> with a new public reset_control_get_dedicated() method, to obtain an
>>> exclusive handle to a reset that is dedicated to one specific hardware
>>> block.
>>>
>>> This supports both DT-based and lookup-based reset controls.
>>>
>>> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
>>> ---
>>> v4:
>>>   - New.
>>>
>>> Notes:
>>>   - Dedicated lookup-based reset controls were not tested,
>>>   - Several internal functions now take 3 boolean flags, and should
>>>     probably be converted to take a bitmask instead,
>>>   - I think __device_reset() should call __reset_control_get() with
>>>     dedicated=true.  However, that will impact existing users,
>>
>> why should it?
> 
> device_reset{,_optional}() are supposed to reset the passed device.
> If the reset is not dedicated, doing so will reset other devices, too.
ok, that's not obvious too me but I am not familiar enough with the API
and existing callers.
> 
>>> --- a/drivers/reset/core.c
>>> +++ b/drivers/reset/core.c
>>> @@ -459,9 +459,38 @@ static void __reset_control_put_internal(struct reset_control *rstc)
>>>       kref_put(&rstc->refcnt, __reset_control_release);
>>>  }
>>>
>>> +static bool __of_reset_is_dedicated(const struct device_node *node,
>>> +                                 const struct of_phandle_args args)
>>> +{
>>> +     struct of_phandle_args args2;
>>> +     struct device_node *node2;
>>> +     int index, ret;
>>> +
>>> +     for_each_node_with_property(node2, "resets") {
>>> +             if (node == node2)
>>> +                     continue;
>>> +
>>> +             for (index = 0; ; index++) {
>>> +                     ret = of_parse_phandle_with_args(node2, "resets",
>>> +                                                      "#reset-cells", index,
>>> +                                                      &args2);
>>> +                     if (ret)
>>> +                             break;
>>> +
>>> +                     if (args2.np == args.np &&
>>> +                         args2.args_count == args.args_count &&
>>> +                         !memcmp(args2.args, args.args,
>>> +                                 args.args_count * sizeof(args.args[0])))
>>> +                             return false;
>> You need to call of_node_put(args2.np) (see of_parse_phandle_with_args
>> kernel doc)
> 
> Thanks, nice catch!
> 
>> Isn't it sufficient to check device_node handles are equal?
> 
> That would make it work with #reset-cells == 0 only.
> If #reset-cells > 0, the reset line specifier includes extra arguments.
> 
> On the Renesas SoCs I'm using, there's a single reset controller, so
> args.np is always the same.  The actual reset line is specified by
> args.args[0].  See the "resets" properties in e.g.
> https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/tree/arch/arm64/boot/dts/renesas/r8a7795.dtsi
OK get it now. Thank you for the explanations.

Best Regards

Eric
> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds
> 



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux