On Mon, 13 Aug 2018 17:48:08 -0400 Tony Krowiak <akrowiak@xxxxxxxxxxxxxxxxxx> wrote: > From: Tony Krowiak <akrowiak@xxxxxxxxxxxxx> > > Introduces two new sysfs attributes for the VFIO mediated > matrix device for assigning AP domains to and unassigning > AP domains from a mediated matrix device. The IDs of the > AP domains assigned to the mediated matrix device will be > stored in an AP queue mask (AQM). > > The bits in the AQM, from most significant to least > significant bit, correspond to AP queue index (APQI) 0 to > 255 (note that an APQI is synonymous with with a domain ID). > On some systems, the maximum allowable domain number may be > less than 255 - depending upon the host's AP configuration - > and assignment may be rejected if the input domain ID exceeds > the limit. > > When a domain is assigned, the bit corresponding to the APQI > will be set in the AQM. Likewise, when a domain is unassigned, > the bit corresponding to the APQI will be cleared from the AQM. > > In order to successfully assign a domain, the APQNs derived from > the domain ID being assigned and the adapter numbers of all > adapters previously assigned: > > 1. Must be bound to the vfio_ap device driver. > > 2. Must not be assigned to any other mediated matrix device. > > If there are no adapters assigned to the mdev, then there must > be an AP queue bound to the vfio_ap device driver with an > APQN containing the domain ID (i.e., APQI), otherwise all > adapters subsequently assigned will fail because there will be no > AP queues bound with an APQN containing the APQI. > > Assigning or un-assigning an AP domain will also be rejected if > a guest using the mediated matrix device is running. > > The relevant sysfs structures are: > > /sys/devices/vfio_ap/matrix/ > ...... [mdev_supported_types] > ......... [vfio_ap-passthrough] > ............ [devices] > ...............[$uuid] > .................. assign_domain > .................. unassign_domain > > To assign a domain to the $uuid mediated matrix device, > write the domain's ID to the assign_domain file. To > unassign a domain, write the domain's ID to the > unassign_domain file. The ID is specified using > conventional semantics: If it begins with 0x, the number > will be parsed as a hexadecimal (case insensitive) number; > if it begins with 0, it will be parsed as an octal number; > otherwise, it will be parsed as a decimal number. > > For example, to assign domain 173 (0xad) to the mediated matrix > device $uuid: > > echo 173 > assign_domain > > or > > echo 0255 > assign_domain > > or > > echo 0xad > assign_domain > > To unassign domain 173 (0xad): > > echo 173 > unassign_domain > > or > > echo 0255 > unassign_domain > > or > > echo 0xad > unassign_domain > > Signed-off-by: Tony Krowiak <akrowiak@xxxxxxxxxxxxx> > Reviewed-by: Halil Pasic <pasic@xxxxxxxxxxxxx> > Tested-by: Michael Mueller <mimu@xxxxxxxxxxxxx> > Tested-by: Farhan Ali <alifm@xxxxxxxxxxxxx> > Tested-by: Pierre Morel <pmorel@xxxxxxxxxxxxx> > Signed-off-by: Christian Borntraeger <borntraeger@xxxxxxxxxx> > --- > drivers/s390/crypto/vfio_ap_ops.c | 88 ++++++++++++++++++++++++++++++++++++- > 1 files changed, 87 insertions(+), 1 deletions(-) Looks sane to me.
