[PATCH v9 05/22] KVM: s390: vsie: simulate VCPU SIE entry/exit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: David Hildenbrand <david@xxxxxxxxxx>

VCPU requests and VCPU blocking right now don't take care of the vSIE
(as it was not necessary until now). But we want to have VCPU requests
that will also be handled before running the vSIE again.

So let's simulate a SIE entry when entering the vSIE loop and check
for PROG_ flags. The existing infrastructure (e.g. exit_sie()) will then
detect that the SIE (in form of the vSIE execution loop) is running and
properly kick the vSIE CPU, resulting in it leaving the vSIE loop and
therefore the vSIE interception handler, allowing it to handle VCPU
requests.

E.g. if we want to modify the crycb of the VCPU and make sure that any
masks also get applied to the VSIE crycb shadow (which uses masks from the
VCPU crycb), we will need a way to hinder the vSIE from running and make
sure to process the updated crycb before reentering the vSIE again.

Signed-off-by: David Hildenbrand <david@xxxxxxxxxx>
Signed-off-by: Tony Krowiak <akrowiak@xxxxxxxxxxxxx>
Reviewed-by: Pierre Morel <pmorel@xxxxxxxxxxxxx>
---
 arch/s390/kvm/kvm-s390.c |    9 ++++++++-
 arch/s390/kvm/kvm-s390.h |    1 +
 arch/s390/kvm/vsie.c     |   20 ++++++++++++++++++--
 3 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 3b7a515..6df2d12 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -2655,18 +2655,25 @@ static void kvm_s390_vcpu_request(struct kvm_vcpu *vcpu)
 	exit_sie(vcpu);
 }
 
+bool kvm_s390_vcpu_sie_inhibited(struct kvm_vcpu *vcpu)
+{
+	return atomic_read(&vcpu->arch.sie_block->prog20) &
+	       (PROG_BLOCK_SIE | PROG_REQUEST);
+}
+
 static void kvm_s390_vcpu_request_handled(struct kvm_vcpu *vcpu)
 {
 	atomic_andnot(PROG_REQUEST, &vcpu->arch.sie_block->prog20);
 }
 
 /*
- * Kick a guest cpu out of SIE and wait until SIE is not running.
+ * Kick a guest cpu out of (v)SIE and wait until (v)SIE is not running.
  * If the CPU is not running (e.g. waiting as idle) the function will
  * return immediately. */
 void exit_sie(struct kvm_vcpu *vcpu)
 {
 	kvm_s390_set_cpuflags(vcpu, CPUSTAT_STOP_INT);
+	kvm_s390_vsie_kick(vcpu);
 	while (vcpu->arch.sie_block->prog0c & PROG_IN_SIE)
 		cpu_relax();
 }
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index 981e3ba..1f6e36c 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -290,6 +290,7 @@ void kvm_s390_set_tod_clock(struct kvm *kvm,
 void kvm_s390_vcpu_stop(struct kvm_vcpu *vcpu);
 void kvm_s390_vcpu_block(struct kvm_vcpu *vcpu);
 void kvm_s390_vcpu_unblock(struct kvm_vcpu *vcpu);
+bool kvm_s390_vcpu_sie_inhibited(struct kvm_vcpu *vcpu);
 void exit_sie(struct kvm_vcpu *vcpu);
 void kvm_s390_sync_request(int req, struct kvm_vcpu *vcpu);
 int kvm_s390_vcpu_setup_cmma(struct kvm_vcpu *vcpu);
diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
index 84c89cb..aa30b48 100644
--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -982,6 +982,17 @@ static int vsie_run(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 	struct kvm_s390_sie_block *scb_s = &vsie_page->scb_s;
 	int rc = 0;
 
+	/*
+	 * Simulate a SIE entry of the VCPU (see sie64a), so VCPU blocking
+	 * and VCPU requests can hinder the whole vSIE loop from running
+	 * and lead to an immediate exit. We do it at this point (not
+	 * earlier), so kvm_s390_vsie_kick() works correctly already.
+	 */
+	vcpu->arch.sie_block->prog0c |= PROG_IN_SIE;
+	barrier();
+	if (kvm_s390_vcpu_sie_inhibited(vcpu))
+		return 0;
+
 	while (1) {
 		rc = acquire_gmap_shadow(vcpu, vsie_page);
 		if (!rc)
@@ -997,10 +1008,14 @@ static int vsie_run(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 		if (rc == -EAGAIN)
 			rc = 0;
 		if (rc || scb_s->icptcode || signal_pending(current) ||
-		    kvm_s390_vcpu_has_irq(vcpu, 0))
+		    kvm_s390_vcpu_has_irq(vcpu, 0) ||
+		    kvm_s390_vcpu_sie_inhibited(vcpu))
 			break;
 	}
 
+	barrier();
+	vcpu->arch.sie_block->prog0c &= ~PROG_IN_SIE;
+
 	if (rc == -EFAULT) {
 		/*
 		 * Addressing exceptions are always presentes as intercepts.
@@ -1114,7 +1129,8 @@ int kvm_s390_handle_vsie(struct kvm_vcpu *vcpu)
 	if (unlikely(scb_addr & 0x1ffUL))
 		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
 
-	if (signal_pending(current) || kvm_s390_vcpu_has_irq(vcpu, 0))
+	if (signal_pending(current) || kvm_s390_vcpu_has_irq(vcpu, 0) ||
+	    kvm_s390_vcpu_sie_inhibited(vcpu))
 		return 0;
 
 	vsie_page = get_vsie_page(vcpu->kvm, scb_addr);
-- 
1.7.1




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux