>
> > This patch adds virtio-pmem driver for KVM guest.
> >
> > Guest reads the persistent memory range information from Qemu over
> > VIRTIO and registers it on nvdimm_bus. It also creates a nd_region
> > object with the persistent memory range information so that existing
> > 'nvdimm/pmem' driver can reserve this into system memory map. This way
> > 'virtio-pmem' driver uses existing functionality of pmem driver to
> > register persistent memory compatible for DAX capable filesystems.
> >
> > This also provides function to perform guest flush over VIRTIO from
> > 'pmem' driver when userspace performs flush on DAX memory range.
> >
> > Signed-off-by: Pankaj Gupta <pagupta@xxxxxxxxxx>
> > ---
> > drivers/virtio/Kconfig | 9 ++
> > drivers/virtio/Makefile | 1 +
> > drivers/virtio/virtio_pmem.c | 190
> > +++++++++++++++++++++++++++++++++++++++
> > include/linux/virtio_pmem.h | 44 +++++++++
> > include/uapi/linux/virtio_ids.h | 1 +
> > include/uapi/linux/virtio_pmem.h | 40 +++++++++
> > 6 files changed, 285 insertions(+)
> > create mode 100644 drivers/virtio/virtio_pmem.c
> > create mode 100644 include/linux/virtio_pmem.h
> > create mode 100644 include/uapi/linux/virtio_pmem.h
> >
> > diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
> > index 3589764..a331e23 100644
> > --- a/drivers/virtio/Kconfig
> > +++ b/drivers/virtio/Kconfig
> > @@ -42,6 +42,15 @@ config VIRTIO_PCI_LEGACY
> >
> > If unsure, say Y.
> >
> > +config VIRTIO_PMEM
> > + tristate "Support for virtio pmem driver"
> > + depends on VIRTIO
> > + help
> > + This driver provides support for virtio based flushing interface
> > + for persistent memory range.
> > +
> > + If unsure, say M.
> > +
> > config VIRTIO_BALLOON
> > tristate "Virtio balloon driver"
> > depends on VIRTIO
> > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > index 3a2b5c5..cbe91c6 100644
> > --- a/drivers/virtio/Makefile
> > +++ b/drivers/virtio/Makefile
> > @@ -6,3 +6,4 @@ virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > virtio_pci-$(CONFIG_VIRTIO_PCI_LEGACY) += virtio_pci_legacy.o
> > obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
> > obj-$(CONFIG_VIRTIO_INPUT) += virtio_input.o
> > +obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o
> > diff --git a/drivers/virtio/virtio_pmem.c b/drivers/virtio/virtio_pmem.c
> > new file mode 100644
> > index 0000000..6200b5e
> > --- /dev/null
> > +++ b/drivers/virtio/virtio_pmem.c
> > @@ -0,0 +1,190 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * virtio_pmem.c: Virtio pmem Driver
> > + *
> > + * Discovers persistent memory range information
> > + * from host and provides a virtio based flushing
> > + * interface.
> > + */
> > +#include <linux/virtio.h>
> > +#include <linux/module.h>
> > +#include <linux/virtio_pmem.h>
> > +
> > +static struct virtio_device_id id_table[] = {
> > + { VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
> > + { 0 },
> > +};
> > +
> > + /* The interrupt handler */
> > +static void host_ack(struct virtqueue *vq)
> > +{
> > + unsigned int len;
> > + unsigned long flags;
> > + struct virtio_pmem_request *req;
> > + struct virtio_pmem *vpmem = vq->vdev->priv;
> > +
> > + spin_lock_irqsave(&vpmem->pmem_lock, flags);
> > + while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
> > + req->done = true;
> > + wake_up(&req->acked);
> > + }
> > + spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
>
> Honest question: why do you need to disable interrupts here?
To avoid interrupt for VQ trying to take same spinlock already taken by process
context and resulting in deadlock. Looks like interrupts are already disabled in
function call, see [1]. But still to protect with any future work.
[1]
vp_interrupt
vp_vring_interrupt
vring_interrupt
>
> > +}
> > + /* Initialize virt queue */
> > +static int init_vq(struct virtio_pmem *vpmem)
> > +{
> > + struct virtqueue *vq;
> > +
> > + /* single vq */
> > + vpmem->req_vq = vq = virtio_find_single_vq(vpmem->vdev,
> > + host_ack, "flush_queue");
> > + if (IS_ERR(vq))
> > + return PTR_ERR(vq);
> > + spin_lock_init(&vpmem->pmem_lock);
> > +
> > + return 0;
> > +};
> > +
> > + /* The request submission function */
> > +static int virtio_pmem_flush(struct device *dev)
> > +{
> > + int err;
> > + unsigned long flags;
> > + struct scatterlist *sgs[2], sg, ret;
> > + struct virtio_device *vdev = dev_to_virtio(dev->parent->parent);
> > + struct virtio_pmem *vpmem = vdev->priv;
> > + struct virtio_pmem_request *req = kmalloc(sizeof(*req), GFP_KERNEL);
>
> Not checking kmalloc() return.
Will add it.
>
> > +
> > + req->done = false;
> > + init_waitqueue_head(&req->acked);
> > + spin_lock_irqsave(&vpmem->pmem_lock, flags);
>
> Why do you need spin_lock_irqsave()? There are two points consider:
>
> 1. Will virtio_pmem_flush() ever be called with interrupts disabled?
> If yes, then it's broken since you should be using GFP_ATOMIC in the
> kmalloc() call and you can't call wait_event()
Yes, GFP_ATOMIC should be right thing.
>
> 2. If virtio_pmem_flush() is never called with interrupts disabled, do
> you really need to disable interrupts? If yes, why?
Same reason as discussed above. Data is shared between interrupt handler
and process context 'virtio-pmem_flush' function. To avoid a deadlock resulting
between interrupt context and process context on same spinlock.
>
> Another point to consider is whether or not virtio_pmem_flush()
> can be called from atomic context. nvdimm_flush() itself is called
> from a few atomic sites, but I can't tell if virtio_pmem_flush()
> will ever be called from those sites. If it can be called atomic
> context, then item 1 applies here. If you're sure it can't, then
> you should probably call might_sleep().
I think 'virtio_pmem_flush' can be called from atomic context.
Thanks,
Pankaj
>
> > +
> > + sg_init_one(&sg, req, sizeof(req));
> > + sgs[0] = &sg;
> > + sg_init_one(&ret, &req->ret, sizeof(req->ret));
> > + sgs[1] = &ret;
> > + err = virtqueue_add_sgs(vpmem->req_vq, sgs, 1, 1, req, GFP_ATOMIC);
> > + if (err) {
> > + dev_err(&vdev->dev, "failed to send command to virtio pmem device\n");
> > + spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
> > + return -ENOSPC;
> > + }
> > + virtqueue_kick(vpmem->req_vq);
> > + spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
> > +
> > + /* When host has read buffer, this completes via host_ack */
> > + wait_event(req->acked, req->done);
> > + err = req->ret;
> > + kfree(req);
> > +
> > + return err;
> > +};
> > +
> > +static int virtio_pmem_probe(struct virtio_device *vdev)
> > +{
> > + int err = 0;
> > + struct resource res;
> > + struct virtio_pmem *vpmem;
> > + struct nvdimm_bus *nvdimm_bus;
> > + struct nd_region_desc ndr_desc;
> > + int nid = dev_to_node(&vdev->dev);
> > + struct nd_region *nd_region;
> > +
> > + if (!vdev->config->get) {
> > + dev_err(&vdev->dev, "%s failure: config disabled\n",
> > + __func__);
> > + return -EINVAL;
> > + }
> > +
> > + vdev->priv = vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem),
> > + GFP_KERNEL);
> > + if (!vpmem) {
> > + err = -ENOMEM;
> > + goto out_err;
> > + }
> > +
> > + vpmem->vdev = vdev;
> > + err = init_vq(vpmem);
> > + if (err)
> > + goto out_err;
> > +
> > + virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> > + start, &vpmem->start);
> > + virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> > + size, &vpmem->size);
> > +
> > + res.start = vpmem->start;
> > + res.end = vpmem->start + vpmem->size-1;
> > + vpmem->nd_desc.provider_name = "virtio-pmem";
> > + vpmem->nd_desc.module = THIS_MODULE;
> > +
> > + vpmem->nvdimm_bus = nvdimm_bus = nvdimm_bus_register(&vdev->dev,
> > + &vpmem->nd_desc);
> > + if (!nvdimm_bus)
> > + goto out_vq;
> > +
> > + dev_set_drvdata(&vdev->dev, nvdimm_bus);
> > + memset(&ndr_desc, 0, sizeof(ndr_desc));
> > +
> > + ndr_desc.res = &res;
> > + ndr_desc.numa_node = nid;
> > + ndr_desc.flush = virtio_pmem_flush;
> > + set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
> > + nd_region = nvdimm_pmem_region_create(nvdimm_bus, &ndr_desc);
> > +
> > + if (!nd_region)
> > + goto out_nd;
> > +
> > + virtio_device_ready(vdev);
> > + return 0;
> > +out_nd:
> > + err = -ENXIO;
> > + nvdimm_bus_unregister(nvdimm_bus);
> > +out_vq:
> > + vdev->config->del_vqs(vdev);
> > +out_err:
> > + dev_err(&vdev->dev, "failed to register virtio pmem memory\n");
> > + return err;
> > +}
> > +
> > +static void virtio_pmem_remove(struct virtio_device *vdev)
> > +{
> > + struct virtio_pmem *vpmem = vdev->priv;
> > + struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
> > +
> > + nvdimm_bus_unregister(nvdimm_bus);
> > + vdev->config->del_vqs(vdev);
> > + kfree(vpmem);
> > +}
> > +
> > +#ifdef CONFIG_PM_SLEEP
> > +static int virtio_pmem_freeze(struct virtio_device *vdev)
> > +{
> > + /* todo: handle freeze function */
> > + return -EPERM;
> > +}
> > +
> > +static int virtio_pmem_restore(struct virtio_device *vdev)
> > +{
> > + /* todo: handle restore function */
> > + return -EPERM;
> > +}
> > +#endif
> > +
> > +
> > +static struct virtio_driver virtio_pmem_driver = {
> > + .driver.name = KBUILD_MODNAME,
> > + .driver.owner = THIS_MODULE,
> > + .id_table = id_table,
> > + .probe = virtio_pmem_probe,
> > + .remove = virtio_pmem_remove,
> > +#ifdef CONFIG_PM_SLEEP
> > + .freeze = virtio_pmem_freeze,
> > + .restore = virtio_pmem_restore,
> > +#endif
> > +};
> > +
> > +module_virtio_driver(virtio_pmem_driver);
> > +MODULE_DEVICE_TABLE(virtio, id_table);
> > +MODULE_DESCRIPTION("Virtio pmem driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/include/linux/virtio_pmem.h b/include/linux/virtio_pmem.h
> > new file mode 100644
> > index 0000000..0f83d9c
> > --- /dev/null
> > +++ b/include/linux/virtio_pmem.h
> > @@ -0,0 +1,44 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * virtio_pmem.h: virtio pmem Driver
> > + *
> > + * Discovers persistent memory range information
> > + * from host and provides a virtio based flushing
> > + * interface.
> > + */
> > +#ifndef _LINUX_VIRTIO_PMEM_H
> > +#define _LINUX_VIRTIO_PMEM_H
> > +
> > +#include <linux/virtio_ids.h>
> > +#include <linux/virtio_config.h>
> > +#include <uapi/linux/virtio_pmem.h>
> > +#include <linux/libnvdimm.h>
> > +#include <linux/spinlock.h>
> > +
> > +struct virtio_pmem_request {
> > + /* Host return status corresponding to flush request */
> > + int ret;
> > +
> > + /* Wait queue to process deferred work after ack from host */
> > + wait_queue_head_t acked;
> > + bool done;
> > +};
> > +
> > +struct virtio_pmem {
> > + struct virtio_device *vdev;
> > +
> > + /* Virtio pmem request queue */
> > + struct virtqueue *req_vq;
> > +
> > + /* nvdimm bus registers virtio pmem device */
> > + struct nvdimm_bus *nvdimm_bus;
> > + struct nvdimm_bus_descriptor nd_desc;
> > +
> > + /* Synchronize virtqueue data */
> > + spinlock_t pmem_lock;
> > +
> > + /* Memory region information */
> > + uint64_t start;
> > + uint64_t size;
> > +};
> > +#endif
> > diff --git a/include/uapi/linux/virtio_ids.h
> > b/include/uapi/linux/virtio_ids.h
> > index 6d5c3b2..3463895 100644
> > --- a/include/uapi/linux/virtio_ids.h
> > +++ b/include/uapi/linux/virtio_ids.h
> > @@ -43,5 +43,6 @@
> > #define VIRTIO_ID_INPUT 18 /* virtio input */
> > #define VIRTIO_ID_VSOCK 19 /* virtio vsock transport */
> > #define VIRTIO_ID_CRYPTO 20 /* virtio crypto */
> > +#define VIRTIO_ID_PMEM 25 /* virtio pmem */
> >
> > #endif /* _LINUX_VIRTIO_IDS_H */
> > diff --git a/include/uapi/linux/virtio_pmem.h
> > b/include/uapi/linux/virtio_pmem.h
> > new file mode 100644
> > index 0000000..c7c22a5
> > --- /dev/null
> > +++ b/include/uapi/linux/virtio_pmem.h
> > @@ -0,0 +1,40 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
> > + * anyone can use the definitions to implement compatible drivers/servers:
> > + *
> > + *
> > + * Redistribution and use in source and binary forms, with or without
> > + * modification, are permitted provided that the following conditions
> > + * are met:
> > + * 1. Redistributions of source code must retain the above copyright
> > + * notice, this list of conditions and the following disclaimer.
> > + * 2. Redistributions in binary form must reproduce the above copyright
> > + * notice, this list of conditions and the following disclaimer in the
> > + * documentation and/or other materials provided with the distribution.
> > + * 3. Neither the name of IBM nor the names of its contributors
> > + * may be used to endorse or promote products derived from this
> > software
> > + * without specific prior written permission.
> > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> > ``AS IS''
> > + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
> > THE
> > + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
> > PURPOSE
> > + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
> > + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
> > CONSEQUENTIAL
> > + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> > + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> > + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
> > STRICT
> > + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY
> > WAY
> > + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> > + * SUCH DAMAGE.
> > + *
> > + * Copyright (C) Red Hat, Inc., 2018-2019
> > + * Copyright (C) Pankaj Gupta <pagupta@xxxxxxxxxx>, 2018
> > + */
> > +#ifndef _UAPI_LINUX_VIRTIO_PMEM_H
> > +#define _UAPI_LINUX_VIRTIO_PMEM_H
> > +
> > +struct virtio_pmem_config {
> > + __le64 start;
> > + __le64 size;
> > +};
> > +#endif
>
>
>
