On Tue, 3 Jul 2018 14:20:11 +0200 Halil Pasic <pasic@xxxxxxxxxxxxx> wrote: > On 07/03/2018 01:52 PM, Cornelia Huck wrote: > > On Tue, 3 Jul 2018 11:22:10 +0200 > > Halil Pasic <pasic@xxxxxxxxxxxxx> wrote: > > > [..] > >> > >> Let me try to invoke the DASD analogy. If one for some reason wants to detach > >> a DASD the procedure to follow seems to be (see > >> https://www.ibm.com/support/knowledgecenter/en/linuxonibm/com.ibm.linux.z.lgdd/lgdd_t_dasd_online.html) > >> the following: > >> 1) Unmount. > >> 2) Offline possibly using safe_offline. > >> 3) Detach. > >> > >> Detaching a disk that is currently doing I/O asks for trouble, so the admin is encouraged > >> to make sure there is no pending I/O. > > > > I don't think we can use dasd (block devices) as a good analogy for > > every kind of device (for starters, consider network devices). > > > > I did not use it for every kind of device. I used it for AP. I'm > under the impression you find the analogy inappropriate. If, could > you please explain why? I don't think block devices (which are designed to be more or less permanently accessed, e.g. by mounting a file system) have the same semantics as ap devices (which exist as a backend for crypto requests). Not everything that makes sense for a block device makes sense for other devices as well, and I don't think it makes sense here. > > >> In case of AP you can interpret my 'in use' as the queue is not empty. In my understanding > >> unbind is supposed to be hard (I used the word radical). That's why I compared it to pulling > >> a cable. So that's why I ask is there stuff the admin is supposed to do before doing the > >> unbind. > > > > Are you asking for a kind of 'quiescing' operation? I would hope that > > the crypto drivers already can deal with that via flushing the queue, > > not allowing new requests, or whatever. This is not the block device > > case. > > > > The current implementation of vfio-ap which is a crypto driver too certainly > can not deal 'with that'. Whether the rest of the drivers can, I don't > know. Maybe Tony can tell. If the current implementation of vfio-ap cannot deal with it (by cleaning up, blocking, etc.), it needs at the very least be documented so that it can be implemented later. I do not know what the SIE will or won't do to assist here (e.g., if you're removing it from some masks, the device will already be inaccessible to the guest). But the part you were referring to was talking about the existing host driver anyway, wasn't it? > > I'm aware of the fact that AP adapters are not block devices. But > as stated above I don't understand what is the big difference regarding > the unbind operation. > > > Anyway, this is an administrative issue. If you don't have a clear > > concept which devices are for host usage and which for guest usage, you > > already have problems. > > I'm trying to understand the whole solution. I agree, this is an administrative > issue. But the document is trying to address such administrative issues. I'd assume "know which devices are for the host and which devices are for the guests" to be a given, no? > > > > Speaking of administrative issues, is there libvirt support for vfio-ap > > under development? It would be helpful to validate the approach. > > I full-heartedly agree. I guess Tony will have to answer this one too. > > Regards, > Halil >
