Re: [Qemu-devel] [RFC v2 1/2] virtio: add pmem driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Apr 25, 2018 at 04:54:13PM +0530, Pankaj Gupta wrote:
> This patch adds virtio-pmem driver for KVM 
> guest. 
> 
> Guest reads the persistent memory range 
> information from Qemu over VIRTIO and registers 
> it on nvdimm_bus. It also creates a nd_region 
> object with the persistent memory range 
> information so that existing 'nvdimm/pmem' 
> driver can reserve this into system memory map. 
> This way 'virtio-pmem' driver uses existing 
> functionality of pmem driver to register persistent 
> memory compatible for DAX capable filesystems.
> 
> This also provides function to perform guest flush 
> over VIRTIO from 'pmem' driver when userspace 
> performs flush on DAX memory range.
> 
> Signed-off-by: Pankaj Gupta <pagupta@xxxxxxxxxx>
> ---
>  drivers/virtio/Kconfig           |  12 ++++
>  drivers/virtio/Makefile          |   1 +
>  drivers/virtio/virtio_pmem.c     | 118 +++++++++++++++++++++++++++++++++++++++
>  include/linux/libnvdimm.h        |   4 ++
>  include/uapi/linux/virtio_ids.h  |   1 +
>  include/uapi/linux/virtio_pmem.h |  58 +++++++++++++++++++
>  6 files changed, 194 insertions(+)
>  create mode 100644 drivers/virtio/virtio_pmem.c
>  create mode 100644 include/uapi/linux/virtio_pmem.h
> 
> diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
> index 3589764..879335d 100644
> --- a/drivers/virtio/Kconfig
> +++ b/drivers/virtio/Kconfig
> @@ -42,6 +42,18 @@ config VIRTIO_PCI_LEGACY
>  
>  	  If unsure, say Y.
>  
> +config VIRTIO_PMEM
> +	tristate "Virtio pmem driver"
> +	depends on VIRTIO
> +	help
> +	 This driver adds persistent memory range to nd_region and registers
> +	 with nvdimm bus. NVDIMM 'pmem' driver later allocates a persistent
> +	 memory range on the memory information added by this driver. In addition
> +	 to this, 'virtio-pmem' driver also provides a paravirt flushing interface
> +	 from guest to host.
> +
> +	 If unsure, say M.
> +
>  config VIRTIO_BALLOON
>  	tristate "Virtio balloon driver"
>  	depends on VIRTIO
> diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> index 3a2b5c5..cbe91c6 100644
> --- a/drivers/virtio/Makefile
> +++ b/drivers/virtio/Makefile
> @@ -6,3 +6,4 @@ virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
>  virtio_pci-$(CONFIG_VIRTIO_PCI_LEGACY) += virtio_pci_legacy.o
>  obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
>  obj-$(CONFIG_VIRTIO_INPUT) += virtio_input.o
> +obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o
> diff --git a/drivers/virtio/virtio_pmem.c b/drivers/virtio/virtio_pmem.c
> new file mode 100644
> index 0000000..0906d2d
> --- /dev/null
> +++ b/drivers/virtio/virtio_pmem.c
> @@ -0,0 +1,118 @@

SPDX license line?  See Documentation/process/license-rules.rst.

> +/* Virtio pmem Driver
> + *
> + * Discovers persitent memory range information

s/persitent/persistent/

> + * from host and provides a virtio based flushing
> + * interface.
> + */
> +
> +#include <linux/virtio.h>
> +#include <linux/swap.h>
> +#include <linux/workqueue.h>
> +#include <linux/delay.h>
> +#include <linux/slab.h>
> +#include <linux/module.h>
> +#include <linux/oom.h>
> +#include <linux/wait.h>
> +#include <linux/magic.h>
> +#include <linux/virtio_pmem.h>
> +#include <linux/libnvdimm.h>

Are all these headers really needed?  delay.h?  oom.h?

> +
> +static int init_vq(struct virtio_pmem *vpmem)
> +{
> +	struct virtqueue *vq;
> +
> +	/* single vq */
> +	vpmem->req_vq = vq = virtio_find_single_vq(vpmem->vdev,
> +				NULL, "flush_queue");
> +
> +	if (IS_ERR(vq))
> +		return PTR_ERR(vq);
> +
> +	return 0;
> +};
> +
> +static int virtio_pmem_probe(struct virtio_device *vdev)
> +{
> +	int err = 0;
> +	struct resource res;
> +	struct virtio_pmem *vpmem;
> +	struct nvdimm_bus *nvdimm_bus;
> +	struct nd_region_desc ndr_desc;
> +	int nid = dev_to_node(&vdev->dev);
> +	static struct nvdimm_bus_descriptor nd_desc;
> +
> +	if (!vdev->config->get) {
> +		dev_err(&vdev->dev, "%s failure: config disabled\n",
> +			__func__);
> +		return -EINVAL;
> +	}
> +
> +	vdev->priv = vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem),
> +			GFP_KERNEL);
> +	if (!vpmem) {
> +		err = -ENOMEM;
> +		goto out;
> +	}
> +
> +	vpmem->vdev = vdev;
> +	err = init_vq(vpmem);
> +	if (err)
> +		goto out;
> +
> +	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> +			start, &vpmem->start);
> +	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> +			size, &vpmem->size);
> +
> +	res.start = vpmem->start;
> +	res.end   = vpmem->start + vpmem->size-1;
> +
> +	memset(&nd_desc, 0, sizeof(nd_desc));
> +	nd_desc.provider_name = "virtio-pmem";
> +	nd_desc.module = THIS_MODULE;
> +	nvdimm_bus = nvdimm_bus_register(&vdev->dev, &nd_desc);
> +
> +	if (!nvdimm_bus)
> +		goto out_nd;
> +	dev_set_drvdata(&vdev->dev, nvdimm_bus);
> +
> +	memset(&ndr_desc, 0, sizeof(ndr_desc));
> +	ndr_desc.res = &res;
> +	ndr_desc.numa_node = nid;
> +	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
> +	set_bit(ND_REGION_VIRTIO, &ndr_desc.flags);
> +
> +	if (!nvdimm_pmem_region_create(nvdimm_bus, &ndr_desc))
> +		goto out_nd;
> +
> +	virtio_device_ready(vdev);
> +	return 0;
> +
> +out_nd:
> +	nvdimm_bus_unregister(nvdimm_bus);
> +out:
> +	dev_err(&vdev->dev, "failed to register virtio pmem memory\n");
> +	vdev->config->del_vqs(vdev);
> +	return err;
> +}
> +
> +static void virtio_pmem_remove(struct virtio_device *vdev)
> +{
> +	struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
> +
> +	nvdimm_bus_unregister(nvdimm_bus);
> +	vdev->config->del_vqs(vdev);
> +}
> +
> +static struct virtio_driver virtio_pmem_driver = {
> +	.driver.name		= KBUILD_MODNAME,
> +	.driver.owner		= THIS_MODULE,
> +	.id_table		= id_table,
> +	.probe			= virtio_pmem_probe,
> +	.remove			= virtio_pmem_remove,
> +};
> +
> +module_virtio_driver(virtio_pmem_driver);
> +MODULE_DEVICE_TABLE(virtio, id_table);
> +MODULE_DESCRIPTION("Virtio pmem driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/libnvdimm.h b/include/linux/libnvdimm.h
> index 097072c..b1b7f14 100644
> --- a/include/linux/libnvdimm.h
> +++ b/include/linux/libnvdimm.h
> @@ -58,6 +58,10 @@ enum {
>  	 * (ADR)
>  	 */
>  	ND_REGION_PERSIST_MEMCTRL = 2,
> +	/*
> +	 * region flag indicating to use VIRTIO flush interface for pmem
> +	 */
> +	ND_REGION_VIRTIO = 3,

Can you add a generic flush callback to libnvdimm instead?  That way
virtio and other drivers can hook in without hardcoding knowledge of
these drivers into libnvdimm.

>  
>  	/* mark newly adjusted resources as requiring a label update */
>  	DPA_RESOURCE_ADJUSTED = 1 << 0,
> diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
> index 6d5c3b2..5ebd049 100644
> --- a/include/uapi/linux/virtio_ids.h
> +++ b/include/uapi/linux/virtio_ids.h
> @@ -43,5 +43,6 @@
>  #define VIRTIO_ID_INPUT        18 /* virtio input */
>  #define VIRTIO_ID_VSOCK        19 /* virtio vsock transport */
>  #define VIRTIO_ID_CRYPTO       20 /* virtio crypto */
> +#define VIRTIO_ID_PMEM         21 /* virtio pmem */
>  
>  #endif /* _LINUX_VIRTIO_IDS_H */
> diff --git a/include/uapi/linux/virtio_pmem.h b/include/uapi/linux/virtio_pmem.h
> new file mode 100644
> index 0000000..2ec27cb
> --- /dev/null
> +++ b/include/uapi/linux/virtio_pmem.h
> @@ -0,0 +1,58 @@
> +/* Virtio pmem Driver
> + *
> + * Discovers persitent memory range information

s/persitent/persistent/

> + * from host and provides a virtio based flushing
> + * interface.
> + */
> +
> +#ifndef _LINUX_VIRTIO_PMEM_H
> +#define _LINUX_VIRTIO_PMEM_H
> +
> +#include <linux/types.h>
> +#include <linux/virtio_types.h>
> +#include <linux/virtio_ids.h>
> +#include <linux/virtio_config.h>
> +#include <linux/virtio_ring.h>
> +
> +
> +struct virtio_pmem_config {
> +
> +	uint64_t start;
> +	uint64_t size;
> +};
> +
> +struct virtio_pmem {
> +
> +	struct virtio_device *vdev;
> +	struct virtqueue *req_vq;
> +
> +	uint64_t start;
> +	uint64_t size;
> +} __packed;

This is a userspace API header file, it should contain definitions that
userspace programs need.  struct virtio_pmem is a kernel-internal struct
that should not be in the uapi headers.

Only define virtio spec structs in this header file (e.g. config space,
request structs, etc).

> +static struct virtio_device_id id_table[] = {
> +	{ VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
> +	{ 0 },
> +};

Why is static variable in the header file?

> +
> +void virtio_pmem_flush(struct device *dev)

This only implements flush command submission, not completion.  Maybe
the next patch will implement that but it's a little strange to only see
half of the flush operation.

Please put the whole flush operation in one patch so it can be reviewed
easily.  At this point I don't know if you've forgotten to implement
wait for completion.

> +{

Why is this function body in the header file?

> +	struct scatterlist sg;
> +	struct virtio_device *vdev  = dev_to_virtio(dev->parent->parent);
> +	struct virtio_pmem   *vpmem = vdev->priv;
> +	char *buf = "FLUSH";

I'm surprised this compiles without a warning.  String literals should
be constant but the char pointer isn't constant.

> +	int err;
> +
> +	sg_init_one(&sg, buf, sizeof(buf));
> +
> +	err = virtqueue_add_outbuf(vpmem->req_vq, &sg, 1, buf, GFP_KERNEL);
> +
> +	if (err) {
> +		dev_err(&vdev->dev, "failed to send command to virtio pmem device\n");
> +		return;
> +	}
> +
> +	virtqueue_kick(vpmem->req_vq);

Is any locking necessary?  Two CPUs must not invoke virtio_pmem_flush()
at the same time.  Not sure if anything guarantees this, maybe you're
relying on libnvdimm but I haven't checked.

> +};
> +
> +#endif
> -- 
> 2.9.3
> 
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux