From: Alexander Duyck <alexander.h.duyck@xxxxxxxxx> Hardware-realized virtio_pci devices can implement SR-IOV, so this patch enables its use. The device in question is an upcoming Intel NIC that implements both a virtio_net PF and virtio_net VFs. These are hardware realizations of what has been up to now been a software interface. The device in question has the following 4-part PCI IDs: PF: vendor: 1af4 device: 1041 subvendor: 8086 subdevice: 15fe VF: vendor: 1af4 device: 1041 subvendor: 8086 subdevice: 05fe The patch currently needs no check for device ID, because the callback will never be made for devices that do not assert the capability or when run on a platform incapable of SR-IOV. One reason for this patch is because the hardware requires the vendor ID of a VF to be the same as the vendor ID of the PF that created it. So it seemed logical to simply have a fully-functioning virtio_net PF create the VFs. This patch makes that possible. Signed-off-by: Mark Rustad <mark.d.rustad@xxxxxxxxx> Signed-off-by: Alexander Duyck <alexander.h.duyck@xxxxxxxxx> --- v4: Dropped call to pci_disable_sriov in virtio_pci_remove function drivers/virtio/virtio_pci_common.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c index 48d4d1cf1cb6..27ab090163b4 100644 --- a/drivers/virtio/virtio_pci_common.c +++ b/drivers/virtio/virtio_pci_common.c @@ -596,6 +596,9 @@ static void virtio_pci_remove(struct pci_dev *pci_dev) #ifdef CONFIG_PM_SLEEP .driver.pm = &virtio_pci_pm_ops, #endif +#ifdef CONFIG_PCI_IOV + .sriov_configure = pci_sriov_configure_unmanaged, +#endif }; module_pci_driver(virtio_pci_driver);
