Re: [PATCH v2 1/8] arm64: KVM: Add invalidate_icache_range helper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marc,

On Fri, Oct 20, 2017 at 04:48:57PM +0100, Marc Zyngier wrote:
> We currently tightly couple dcache clean with icache invalidation,
> but KVM could do without the initial flush to PoU, as we've
> already flushed things to PoC.
> 
> Let's introduce invalidate_icache_range which is limited to
> invalidating the icache from the linear mapping (and thus
> has none of the userspace fault handling complexity), and
> wire it in KVM instead of flush_icache_range.
> 
> Reviewed-by: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
> Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
> ---
>  arch/arm64/include/asm/assembler.h  | 26 ++++++++++++++++++++++++++
>  arch/arm64/include/asm/cacheflush.h |  8 ++++++++
>  arch/arm64/include/asm/kvm_mmu.h    |  4 ++--
>  arch/arm64/mm/cache.S               | 26 ++++++++++++++++----------
>  4 files changed, 52 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
> index d58a6253c6ab..efdbecc8f2ef 100644
> --- a/arch/arm64/include/asm/assembler.h
> +++ b/arch/arm64/include/asm/assembler.h
> @@ -374,6 +374,32 @@ alternative_endif
>  	dsb	\domain
>  	.endm
>  
> +/*
> + * Macro to perform an instruction cache maintenance for the interval
> + * [start, end)
> + *
> + * 	start, end:	virtual addresses describing the region
> + *	label:		A label to branch to on user fault, none if
> + *			only used on a kernel address
> + * 	Corrupts:	tmp1, tmp2
> + */
> +	.macro invalidate_icache_by_line start, end, tmp1, tmp2, label=none
> +	icache_line_size \tmp1, \tmp2
> +	sub	\tmp2, \tmp1, #1
> +	bic	\tmp2, \start, \tmp2
> +9997:
> +	.if	(\label == none)
> +	ic	ivau, \tmp2			// invalidate I line PoU
> +	.else
> +USER(\label, ic	ivau, \tmp2)			// invalidate I line PoU
> +	.endif
> +	add	\tmp2, \tmp2, \tmp1
> +	cmp	\tmp2, \end
> +	b.lo	9997b
> +	dsb	ish
> +	isb
> +	.endm

Code looks fine to me, but I'd like to drop the \label == none case. See
below.

>  /*
>   * reset_pmuserenr_el0 - reset PMUSERENR_EL0 if PMUv3 present
>   */
> diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h
> index 76d1cc85d5b1..ad56406944c6 100644
> --- a/arch/arm64/include/asm/cacheflush.h
> +++ b/arch/arm64/include/asm/cacheflush.h
> @@ -52,6 +52,13 @@
>   *		- start  - virtual start address
>   *		- end    - virtual end address
>   *
> + *	invalidate_icache_range(start, end)
> + *
> + *		Invalidate the I-cache in the region described by start, end.
> + *		Linear mapping only!
> + *		- start  - virtual start address
> + *		- end    - virtual end address
> + *
>   *	__flush_cache_user_range(start, end)
>   *
>   *		Ensure coherency between the I-cache and the D-cache in the
> @@ -66,6 +73,7 @@
>   *		- size   - region size
>   */
>  extern void flush_icache_range(unsigned long start, unsigned long end);
> +extern void invalidate_icache_range(unsigned long start, unsigned long end);
>  extern void __flush_dcache_area(void *addr, size_t len);
>  extern void __inval_dcache_area(void *addr, size_t len);
>  extern void __clean_dcache_area_poc(void *addr, size_t len);
> diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
> index 8034b96fb3a4..56b3e03c85e7 100644
> --- a/arch/arm64/include/asm/kvm_mmu.h
> +++ b/arch/arm64/include/asm/kvm_mmu.h
> @@ -250,8 +250,8 @@ static inline void __invalidate_icache_guest_page(struct kvm_vcpu *vcpu,
>  		/* PIPT or VPIPT at EL2 (see comment in __kvm_tlb_flush_vmid_ipa) */
>  		void *va = page_address(pfn_to_page(pfn));
>  
> -		flush_icache_range((unsigned long)va,
> -				   (unsigned long)va + size);
> +		invalidate_icache_range((unsigned long)va,
> +					(unsigned long)va + size);
>  	}
>  }
>  
> diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S
> index 7f1dbe962cf5..8e71d237f85e 100644
> --- a/arch/arm64/mm/cache.S
> +++ b/arch/arm64/mm/cache.S
> @@ -60,16 +60,7 @@ user_alt 9f, "dc cvau, x4",  "dc civac, x4",  ARM64_WORKAROUND_CLEAN_CACHE
>  	b.lo	1b
>  	dsb	ish
>  
> -	icache_line_size x2, x3
> -	sub	x3, x2, #1
> -	bic	x4, x0, x3
> -1:
> -USER(9f, ic	ivau, x4	)		// invalidate I line PoU
> -	add	x4, x4, x2
> -	cmp	x4, x1
> -	b.lo	1b
> -	dsb	ish
> -	isb
> +	invalidate_icache_by_line x0, x1, x2, x3, 9f
>  	mov	x0, #0
>  1:
>  	uaccess_ttbr0_disable x1
> @@ -80,6 +71,21 @@ USER(9f, ic	ivau, x4	)		// invalidate I line PoU
>  ENDPROC(flush_icache_range)
>  ENDPROC(__flush_cache_user_range)
>  
> +/*
> + *	invalidate_icache_range(start,end)
> + *
> + *	Ensure that the I cache is invalid within specified region. This
> + *	assumes that this is done on the linear mapping. Do not use it
> + *	on a userspace range, as this may fault horribly.

I'm still not sure why we're not hooking up the user fault handling here.
In the worst case, we'd end up returning -EFAULT if we got passed a
faulting user address and there's already precedence for this with e.g.
flush_icache_range.

Will



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux