Hi Anup,
We should add default (as below).
On 17-08-22 03:00 AM, Anup Patel wrote:
This patch adds Broadcom FlexRM low-level reset for
VFIO platform.
It will do the following:
1. Disable/Deactivate each FlexRM ring
2. Flush each FlexRM ring
The cleanup sequence for FlexRM rings is adapted from
Broadcom FlexRM mailbox driver.
Signed-off-by: Anup Patel <anup.patel@xxxxxxxxxxxx>
Reviewed-by: Oza Oza <oza.oza@xxxxxxxxxxxx>
Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
Reviewed-by: Eric Auger <eric.auger@xxxxxxxxxx>
---
drivers/vfio/platform/reset/Kconfig | 8 ++
drivers/vfio/platform/reset/Makefile | 1 +
.../vfio/platform/reset/vfio_platform_bcmflexrm.c | 100 +++++++++++++++++++++
3 files changed, 109 insertions(+)
create mode 100644 drivers/vfio/platform/reset/vfio_platform_bcmflexrm.c
diff --git a/drivers/vfio/platform/reset/Kconfig b/drivers/vfio/platform/reset/Kconfig
index 70cccc5..8833805 100644
--- a/drivers/vfio/platform/reset/Kconfig
+++ b/drivers/vfio/platform/reset/Kconfig
@@ -13,3 +13,11 @@ config VFIO_PLATFORM_AMDXGBE_RESET
Enables the VFIO platform driver to handle reset for AMD XGBE
If you don't know what to do here, say N.
+
+config VFIO_PLATFORM_BCMFLEXRM_RESET
+ tristate "VFIO support for Broadcom FlexRM reset"
+ depends on VFIO_PLATFORM && (ARCH_BCM_IPROC || COMPILE_TEST)
default ARCH_BCM_IPROC
+ help
+ Enables the VFIO platform driver to handle reset for Broadcom FlexRM
+
+ If you don't know what to do here, say N.
