Re: Re: kvm_intel fails to load on Conroe CPUs running Linux 4.12

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 07/08/17 18:50, Paolo Bonzini wrote:
Given the rarity of your machine I'm currently leaning towards _not_
reverting the change.  I'll check another non-Xeon Core 2 tomorrow that
is from December 2008 (IIRC).  If that one also lacks vNMI, or if I get
other reports, I suppose I will have to reconsider that.

afraid I've the same issue with 4.12, kvm_intel doesn't load and won't (but does on 4.11) on my Dell XPS M1210 with a Core 2 Duo T7200 from April 2007.

cpuinfo and vmxcap output attached

Thanks,

Niall
processor	: 0
vendor_id	: GenuineIntel
cpu family	: 6
model		: 15
model name	: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz
stepping	: 6
microcode	: 0xc7
cpu MHz		: 1000.000
cache size	: 4096 KB
physical id	: 0
siblings	: 2
core id		: 0
cpu cores	: 2
apicid		: 0
initial apicid	: 0
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow dtherm
bugs		:
bogomips	: 3994.63
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 6
model		: 15
model name	: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz
stepping	: 6
microcode	: 0xc7
cpu MHz		: 1000.000
cache size	: 4096 KB
physical id	: 0
siblings	: 2
core id		: 1
cpu cores	: 2
apicid		: 1
initial apicid	: 1
fpu		: yes
fpu_exception	: yes
cpuid level	: 10
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow dtherm
bugs		:
bogomips	: 3994.45
clflush size	: 64
cache_alignment	: 64
address sizes	: 36 bits physical, 48 bits virtual
power management:

Basic VMX Information
  Hex: 0x1a040000000007
  Revision                                 7
  VMCS size                                1024
  VMCS restricted to 32 bit addresses      no
  Dual-monitor support                     yes
  VMCS memory type                         6
  INS/OUTS instruction information         no
  IA32_VMX_TRUE_*_CTLS support             no
pin-based controls
  External interrupt exiting               yes
  NMI exiting                              yes
  Virtual NMIs                             no
  Activate VMX-preemption timer            no
  Process posted interrupts                no
primary processor-based controls
  Interrupt window exiting                 yes
  Use TSC offsetting                       yes
  HLT exiting                              yes
  INVLPG exiting                           yes
  MWAIT exiting                            yes
  RDPMC exiting                            yes
  RDTSC exiting                            yes
  CR3-load exiting                         forced
  CR3-store exiting                        forced
  CR8-load exiting                         yes
  CR8-store exiting                        yes
  Use TPR shadow                           yes
  NMI-window exiting                       no
  MOV-DR exiting                           yes
  Unconditional I/O exiting                yes
  Use I/O bitmaps                          yes
  Monitor trap flag                        no
  Use MSR bitmaps                          yes
  MONITOR exiting                          yes
  PAUSE exiting                            yes
  Activate secondary control               no
secondary processor-based controls
  Virtualize APIC accesses                 no
  Enable EPT                               no
  Descriptor-table exiting                 no
  Enable RDTSCP                            no
  Virtualize x2APIC mode                   no
  Enable VPID                              no
  WBINVD exiting                           no
  Unrestricted guest                       no
  APIC register emulation                  no
  Virtual interrupt delivery               no
  PAUSE-loop exiting                       no
  RDRAND exiting                           no
  Enable INVPCID                           no
  Enable VM functions                      no
  VMCS shadowing                           no
  Enable ENCLS exiting                     no
  RDSEED exiting                           no
  Enable PML                               no
  EPT-violation #VE                        no
  Conceal non-root operation from PT       no
  Enable XSAVES/XRSTORS                    no
  Mode-based execute control (XS/XU)       no
  TSC scaling                              no
VM-Exit controls
  Save debug controls                      forced
  Host address-space size                  yes
  Load IA32_PERF_GLOBAL_CTRL               no
  Acknowledge interrupt on exit            yes
  Save IA32_PAT                            no
  Load IA32_PAT                            no
  Save IA32_EFER                           no
  Load IA32_EFER                           no
  Save VMX-preemption timer value          no
  Clear IA32_BNDCFGS                       no
  Conceal VM exits from PT                 no
VM-Entry controls
  Load debug controls                      forced
  IA-32e mode guest                        yes
  Entry to SMM                             yes
  Deactivate dual-monitor treatment        yes
  Load IA32_PERF_GLOBAL_CTRL               no
  Load IA32_PAT                            no
  Load IA32_EFER                           no
  Load IA32_BNDCFGS                        no
  Conceal VM entries from PT               no
Miscellaneous data
  Hex: 0x403c0
  VMX-preemption timer scale (log2)        0
  Store EFER.LMA into IA-32e mode guest control no
  HLT activity state                       yes
  Shutdown activity state                  yes
  Wait-for-SIPI activity state             yes
  IA32_SMBASE support                      no
  Number of CR3-target values              4
  MSR-load/store count recommendation      0
  IA32_SMM_MONITOR_CTL[2] can be set to 1  no
  VMWRITE to VM-exit information fields    no
  Inject event with insn length=0          no
  MSEG revision identifier                 0
VPID and EPT capabilities
  Hex: 0x0
  Execute-only EPT translations            no
  Page-walk length 4                       no
  Paging-structure memory type UC          no
  Paging-structure memory type WB          no
  2MB EPT pages                            no
  1GB EPT pages                            no
  INVEPT supported                         no
  EPT accessed and dirty flags             no
  Single-context INVEPT                    no
  All-context INVEPT                       no
  INVVPID supported                        no
  Individual-address INVVPID               no
  Single-context INVVPID                   no
  All-context INVVPID                      no
  Single-context-retaining-globals INVVPID no
VM Functions
  Hex: 0x0
  EPTP Switching                           no

[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux