Laszlo, Thank you very much for your carefully review again and again. I am following your suggestion. 2017-06-03 20:01 GMT+08:00, Laszlo Ersek <lersek@xxxxxxxxxx>: > On 05/22/17 16:23, Laszlo Ersek wrote: >> Keeping some context: >> >> On 05/12/17 23:00, Laszlo Ersek wrote: >>> On 04/30/17 07:35, Dongjiu Geng wrote: > >> (68) In the code below, you are not taking an "OVMF header probe >> suppressor" into account. >> >> But, we have already planned to replace that quirk with a separate, >> dedicated allocation hint or command, so I'm not going to describe what >> an "OVMF header probe suppressor" is; instead, I'll describe the >> replacement for it. >> >> [...] > > So, the NOACPI allocation hint is a no-go at the moment, based on the > discussion in the following threads: > > http://mid.mail-archive.com/20170601112241.2580-1-ard.biesheuvel@xxxxxxxxxx > > http://mid.mail-archive.com/c76b36de-ebf9-c662-d454-0a95b43901e8@xxxxxxxxxx > > Therefore the header probe suppression remains necessary. > > In this case, it is not hard to do, you just have to reorder the > following two ADD_POINTER additions a bit: > >>>> + >>>> + bios_linker_loader_add_pointer(linker, >>>> GHES_ERRORS_FW_CFG_FILE, >>>> + sizeof(uint64_t) * i, >>>> sizeof(uint64_t), >>>> + GHES_ERRORS_FW_CFG_FILE, >>>> + MAX_ERROR_SOURCE_COUNT_V6 * >>>> sizeof(uint64_t) + >>>> + i * MAX_RAW_DATA_LENGTH); > > This one should be moved out to a separate loop, after the current loop. > >>>> + bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE, >>>> + address_registers_offset >>>> + + i * sizeof(AcpiGenericHardwareErrorSource), >>>> + sizeof(uint32_t), GHES_ERRORS_FW_CFG_FILE, >>>> + i * sizeof(uint64_t)); > > This one should be kept in the first (i.e., current) loop. > > The idea is, when you first point the HEST/GHES_n entries in > ACPI_BUILD_TABLE_FILE to the "address registers" in > GHES_ERRORS_FW_CFG_FILE, all those address registers will still be > zero-filled. This will fail the ACPI table header probe in > OvmfPkg/AcpiPlatformDxe, which is what we want. > > After this is done, the address registers in GHES_ERRORS_FW_CFG_FILE > should be pointed to the error status data blocks in the same fw_cfg > blob, in a separate loop. (Those error status data blocks will again be > zero-filled, so no ACPI table headers will be mistakenly recognized in > them.) > > Thanks > Laszlo > _______________________________________________ > kvmarm mailing list > kvmarm@xxxxxxxxxxxxxxxxxxxxx > https://lists.cs.columbia.edu/mailman/listinfo/kvmarm >
