Re: [RFC PATCH v4 14/28] Add support to access boot related data in the clear

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/21/2017 9:06 AM, Borislav Petkov wrote:
On Thu, Feb 16, 2017 at 09:45:09AM -0600, Tom Lendacky wrote:
Boot data (such as EFI related data) is not encrypted when the system is
booted and needs to be mapped decrypted.  Add support to apply the proper
attributes to the EFI page tables and to the early_memremap and memremap
APIs to identify the type of data being accessed so that the proper
encryption attribute can be applied.

So this doesn't even begin to explain *why* we need this. The emphasis
being on *why*.

Lemme guess? kexec? And because of efi_reuse_config?

Hmm... maybe I'm missing something here.  This doesn't have anything to
do with kexec or efi_reuse_config.  This has to do with the fact that
when a system boots the setup data and the EFI data are not encrypted.
Since it's not encrypted we need to be sure that any early_memremap()
and memremap() calls remove the encryption mask from the resulting
pagetable entry that is created so the data can be accessed properly.


If so, then that whole ad-hoc caching in parse_setup_data() needs to go.
Especially if efi_reuse_config() already sees those addresses so while
we're there, we could save them somewhere or whatnot. But not doing the
whole thing again in parse_setup_data().

Signed-off-by: Tom Lendacky <thomas.lendacky@xxxxxxx>
---
 arch/x86/include/asm/io.h      |    3 +
 arch/x86/include/asm/setup.h   |    8 +++
 arch/x86/kernel/setup.c        |   33 ++++++++++++
 arch/x86/mm/ioremap.c          |  111 ++++++++++++++++++++++++++++++++++++++++
 arch/x86/platform/efi/efi_64.c |   16 ++++--
 kernel/memremap.c              |   11 ++++
 mm/early_ioremap.c             |   18 +++++-
 7 files changed, 192 insertions(+), 8 deletions(-)

diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index 7afb0e2..833f7cc 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -381,4 +381,7 @@ extern int __must_check arch_phys_wc_add(unsigned long base,
 #define arch_io_reserve_memtype_wc arch_io_reserve_memtype_wc
 #endif

+extern bool arch_memremap_do_ram_remap(resource_size_t offset, size_t size);
+#define arch_memremap_do_ram_remap arch_memremap_do_ram_remap
+
 #endif /* _ASM_X86_IO_H */
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index ac1d5da..99998d9 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -63,6 +63,14 @@ static inline void x86_ce4100_early_setup(void) { }
 #include <asm/espfix.h>
 #include <linux/kernel.h>

+struct setup_data_attrs {
+	u64 paddr;
+	unsigned long size;
+};
+
+extern struct setup_data_attrs setup_data_list[];
+extern unsigned int setup_data_list_count;
+
 /*
  * This is set up by the setup-routine at boot-time
  */
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index bd5b9a7..d2234bf 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -148,6 +148,9 @@ int default_check_phys_apicid_present(int phys_apicid)

 struct boot_params boot_params;

+struct setup_data_attrs setup_data_list[32];
+unsigned int setup_data_list_count;
+
 /*
  * Machine setup..
  */
@@ -419,6 +422,32 @@ static void __init reserve_initrd(void)
 }
 #endif /* CONFIG_BLK_DEV_INITRD */

+static void __init update_setup_data_list(u64 pa_data, unsigned long size)
+{
+	unsigned int i;
+
+	for (i = 0; i < setup_data_list_count; i++) {
+		if (setup_data_list[i].paddr != pa_data)
+			continue;
+
+		setup_data_list[i].size = size;
+		break;
+	}
+}
+
+static void __init add_to_setup_data_list(u64 pa_data, unsigned long size)
+{
+	if (!sme_active())
+		return;
+
+	if (!WARN(setup_data_list_count == ARRAY_SIZE(setup_data_list),
+		  "exceeded maximum setup data list slots")) {
+		setup_data_list[setup_data_list_count].paddr = pa_data;
+		setup_data_list[setup_data_list_count].size = size;
+		setup_data_list_count++;
+	}
+}
+
 static void __init parse_setup_data(void)
 {
 	struct setup_data *data;
@@ -428,12 +457,16 @@ static void __init parse_setup_data(void)
 	while (pa_data) {
 		u32 data_len, data_type;

+		add_to_setup_data_list(pa_data, sizeof(*data));
+
 		data = early_memremap(pa_data, sizeof(*data));
 		data_len = data->len + sizeof(struct setup_data);
 		data_type = data->type;
 		pa_next = data->next;
 		early_memunmap(data, sizeof(*data));

+		update_setup_data_list(pa_data, data_len);
+
 		switch (data_type) {
 		case SETUP_E820_EXT:
 			e820__memory_setup_extended(pa_data, data_len);
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 2385e70..b0ff6bc 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -13,6 +13,7 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/mmiotrace.h>
+#include <linux/efi.h>

 #include <asm/cacheflush.h>
 #include <asm/e820/api.h>
@@ -21,6 +22,7 @@
 #include <asm/tlbflush.h>
 #include <asm/pgalloc.h>
 #include <asm/pat.h>
+#include <asm/setup.h>

 #include "physaddr.h"

@@ -419,6 +421,115 @@ void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)
 	iounmap((void __iomem *)((unsigned long)addr & PAGE_MASK));
 }

+/*
+ * Examine the physical address to determine if it is boot data. Check
+ * it against the boot params structure and EFI tables.
+ */
+static bool memremap_is_setup_data(resource_size_t phys_addr,
+				   unsigned long size)
+{
+	unsigned int i;
+	u64 paddr;
+
+	for (i = 0; i < setup_data_list_count; i++) {
+		if (phys_addr < setup_data_list[i].paddr)
+			continue;
+
+		if (phys_addr >= (setup_data_list[i].paddr +
+				  setup_data_list[i].size))
+			continue;
+
+		/* Address is within setup data range */
+		return true;
+	}
+
+	paddr = boot_params.efi_info.efi_memmap_hi;
+	paddr <<= 32;
+	paddr |= boot_params.efi_info.efi_memmap;
+	if (phys_addr == paddr)
+		return true;
+
+	paddr = boot_params.efi_info.efi_systab_hi;
+	paddr <<= 32;
+	paddr |= boot_params.efi_info.efi_systab;
+	if (phys_addr == paddr)
+		return true;
+
+	if (efi_table_address_match(phys_addr))
+		return true;
+
+	return false;
+}
+
+/*
+ * This function determines if an address should be mapped encrypted.
+ * Boot setup data, EFI data and E820 areas are checked in making this
+ * determination.
+ */
+static bool memremap_should_map_encrypted(resource_size_t phys_addr,
+					  unsigned long size)
+{
+	/*
+	 * SME is not active, return true:
+	 *   - For early_memremap_pgprot_adjust(), returning true or false
+	 *     results in the same protection value
+	 *   - For arch_memremap_do_ram_remap(), returning true will allow
+	 *     the RAM remap to occur instead of falling back to ioremap()
+	 */
+	if (!sme_active())
+		return true;
+
+	/* Check if the address is part of the setup data */
+	if (memremap_is_setup_data(phys_addr, size))
+		return false;
+
+	/* Check if the address is part of EFI boot/runtime data */
+	switch (efi_mem_type(phys_addr)) {

arch/x86/built-in.o: In function `memremap_should_map_encrypted':
/home/boris/kernel/alt-linux/arch/x86/mm/ioremap.c:487: undefined reference to `efi_mem_type'
make: *** [vmlinux] Error 1

That's a !CONFIG_EFI .config.

Missed that, I'll fix it.


+	case EFI_BOOT_SERVICES_DATA:
+	case EFI_RUNTIME_SERVICES_DATA:
+		return false;
+	default:
+		break;
+	}
+
+	/* Check if the address is outside kernel usable area */
+	switch (e820__get_entry_type(phys_addr, phys_addr + size - 1)) {
+	case E820_TYPE_RESERVED:
+	case E820_TYPE_ACPI:
+	case E820_TYPE_NVS:
+	case E820_TYPE_UNUSABLE:
+		return false;
+	default:
+		break;
+	}
+
+	return true;
+}
+
+/*
+ * Architecure function to determine if RAM remap is allowed.
+ */
+bool arch_memremap_do_ram_remap(resource_size_t phys_addr, unsigned long size)
+{
+	return memremap_should_map_encrypted(phys_addr, size);
+}
+
+/*
+ * Architecure override of __weak function to adjust the protection attributes
+ * used when remapping memory.
+ */
+pgprot_t __init early_memremap_pgprot_adjust(resource_size_t phys_addr,
+					     unsigned long size,
+					     pgprot_t prot)
+{
+	if (memremap_should_map_encrypted(phys_addr, size))
+		prot = pgprot_encrypted(prot);
+	else
+		prot = pgprot_decrypted(prot);
+
+	return prot;
+}
+
 #ifdef CONFIG_ARCH_USE_MEMREMAP_PROT
 /* Remap memory with encryption */
 void __init *early_memremap_encrypted(resource_size_t phys_addr,
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index 2ee7694..2d8674d 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -243,7 +243,7 @@ void efi_sync_low_kernel_mappings(void)

 int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 {
-	unsigned long pfn, text;
+	unsigned long pfn, text, pf;
 	struct page *page;
 	unsigned npages;
 	pgd_t *pgd;
@@ -251,7 +251,13 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 	if (efi_enabled(EFI_OLD_MEMMAP))
 		return 0;

-	efi_scratch.efi_pgt = (pgd_t *)__pa(efi_pgd);
+	/*
+	 * Since the PGD is encrypted, set the encryption mask so that when
+	 * this value is loaded into cr3 the PGD will be decrypted during
+	 * the pagetable walk.
+	 */
+	efi_scratch.efi_pgt = (pgd_t *)__sme_pa(efi_pgd);
+
 	pgd = efi_pgd;

 	/*
@@ -261,7 +267,8 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 	 * phys_efi_set_virtual_address_map().
 	 */
 	pfn = pa_memmap >> PAGE_SHIFT;
-	if (kernel_map_pages_in_pgd(pgd, pfn, pa_memmap, num_pages, _PAGE_NX | _PAGE_RW)) {
+	pf = _PAGE_NX | _PAGE_RW | _PAGE_ENC;
+	if (kernel_map_pages_in_pgd(pgd, pfn, pa_memmap, num_pages, pf)) {
 		pr_err("Error ident-mapping new memmap (0x%lx)!\n", pa_memmap);
 		return 1;
 	}
@@ -304,7 +311,8 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 	text = __pa(_text);
 	pfn = text >> PAGE_SHIFT;

-	if (kernel_map_pages_in_pgd(pgd, pfn, text, npages, _PAGE_RW)) {
+	pf = _PAGE_RW | _PAGE_ENC;
+	if (kernel_map_pages_in_pgd(pgd, pfn, text, npages, pf)) {
 		pr_err("Failed to map kernel text 1:1\n");
 		return 1;
 	}

Those changes should be in a separate patch IMHO.

I can break out the mapping changes from the EFI pagetable changes.

Thanks,
Tom





[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux