Re: [PATCH V10 05/10] acpi: apei: handle SEA notification type for ARMv8

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Ard,


On 2/16/2017 11:32 AM, Ard Biesheuvel wrote:
On 15 February 2017 at 19:51, Tyler Baicar <tbaicar@xxxxxxxxxxxxxx> wrote:
ARM APEI extension proposal added SEA (Synchronous External Abort)
notification type for ARMv8.
Add a new GHES error source handling function for SEA. If an error
source's notification type is SEA, then this function can be registered
into the SEA exception handler. That way GHES will parse and report
SEA exceptions when they occur.
An SEA can interrupt code that had interrupts masked and is treated as
an NMI. To aid this the page of address space for mapping APEI buffers
while in_nmi() is always reserved, and ghes_ioremap_pfn_nmi() is
changed to use the helper methods to find the prot_t to map with in
the same way as ghes_ioremap_pfn_irq().

Signed-off-by: Tyler Baicar <tbaicar@xxxxxxxxxxxxxx>
Signed-off-by: Jonathan (Zhixiong) Zhang <zjzhang@xxxxxxxxxxxxxx>
Signed-off-by: Naveen Kaje <nkaje@xxxxxxxxxxxxxx>
---
  arch/arm64/Kconfig        |  2 ++
  arch/arm64/mm/fault.c     | 13 ++++++++
  drivers/acpi/apei/Kconfig | 14 +++++++++
  drivers/acpi/apei/ghes.c  | 77 +++++++++++++++++++++++++++++++++++++++++++----
  include/acpi/ghes.h       |  7 +++++
  5 files changed, 107 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 1117421..8557556 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig

@@ -498,6 +500,17 @@ static int do_sea(unsigned long addr, unsigned int esr, struct pt_regs *regs)
         pr_err("Synchronous External Abort: %s (0x%08x) at 0x%016lx\n",
                  fault_name(esr), esr, addr);

+       /*
+        * Synchronous aborts may interrupt code which had interrupts masked.
+        * Before calling out into the wider kernel tell the interested
+        * subsystems.
+        */
+       if(IS_ENABLED(HAVE_ACPI_APEI_SEA)) {
Missing space after 'if'
I'll add that in.
+               nmi_enter();
+               ghes_notify_sea();
+               nmi_exit();
+       }
+
         info.si_signo = SIGBUS;
         info.si_errno = 0;
         info.si_code  = 0;
diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig
index b0140c8..ef7f7bd 100644
--- a/drivers/acpi/apei/Kconfig
+++ b/drivers/acpi/apei/Kconfig
@@ -4,6 +4,20 @@ config HAVE_ACPI_APEI
  config HAVE_ACPI_APEI_NMI
         bool

+config HAVE_ACPI_APEI_SEA
HAVE_xxx Kconfig options are typically non user selectable, so I
suggest to drop the HAVE_ prefix here. Also, you should probably make
it 'default y' rather than select it elsewhere; this will still honour
the dependency on ARM64 && ACPI_APEI_GHES

Okay, I will drop the HAVE_ and add in the default y

Thanks,
Tyler

--
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.




[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux