Hi all,
Today's linux-next merge of the kvm tree got a conflict in:
arch/powerpc/kernel/exceptions-64s.S
between commit:
1a6822d194c3 ("powerpc/64s: Use (start, size) rather than (start, end) for exception handlers")
from the powerpc tree and commit:
bc3551257af8 ("powerpc/64: Allow for relocation-on interrupts from guest to host")
from the kvm tree.
I fixed it up (I think - see below) and can carry the fix as necessary.
This is now fixed as far as linux-next is concerned, but any non trivial
conflicts should be mentioned to your upstream maintainer when your tree
is submitted for merging. You may also want to consider cooperating
with the maintainer of the conflicting tree to minimise any particularly
complex conflicts.
--
Cheers,
Stephen Rothwell
diff --cc arch/powerpc/kernel/exceptions-64s.S
index a6205a4a3574,34a04a5fa468..000000000000
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@@ -720,14 -720,10 +720,10 @@@ hardware_interrupt_hv
FTR_SECTION_ELSE
_MASKABLE_EXCEPTION_PSERIES(0x500, hardware_interrupt_common,
EXC_STD, SOFTEN_TEST_PR)
- do_kvm_0x500:
- KVM_HANDLER(PACA_EXGEN, EXC_STD, 0x500)
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-EXC_REAL_END(hardware_interrupt, 0x500, 0x600)
+EXC_REAL_END(hardware_interrupt, 0x500, 0x100)
-EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x4600)
+EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100)
.globl hardware_interrupt_relon_hv;
hardware_interrupt_relon_hv:
BEGIN_FTR_SECTION
@@@ -735,8 -731,10 +731,10 @@@
FTR_SECTION_ELSE
_MASKABLE_RELON_EXCEPTION_PSERIES(0x500, hardware_interrupt_common, EXC_STD, SOFTEN_TEST_PR)
ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE)
-EXC_VIRT_END(hardware_interrupt, 0x4500, 0x4600)
+EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100)
+ TRAMP_KVM(PACA_EXGEN, 0x500)
+ TRAMP_KVM_HV(PACA_EXGEN, 0x500)
EXC_COMMON_ASYNC(hardware_interrupt_common, 0x500, do_IRQ)
@@@ -884,35 -907,15 +907,15 @@@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE
b system_call_common ;
#endif
-EXC_REAL_BEGIN(system_call, 0xc00, 0xd00)
+EXC_REAL_BEGIN(system_call, 0xc00, 0x100)
- /*
- * If CONFIG_KVM_BOOK3S_64_HANDLER is set, save the PPR (on systems
- * that support it) before changing to HMT_MEDIUM. That allows the KVM
- * code to save that value into the guest state (it is the guest's PPR
- * value). Otherwise just change to HMT_MEDIUM as userspace has
- * already saved the PPR.
- */
- #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
- SET_SCRATCH0(r13)
- GET_PACA(r13)
- std r9,PACA_EXGEN+EX_R9(r13)
- OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR);
- HMT_MEDIUM;
- std r10,PACA_EXGEN+EX_R10(r13)
- OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r9, CPU_FTR_HAS_PPR);
- mfcr r9
- KVMTEST_PR(0xc00)
- GET_SCRATCH0(r13)
- #else
- HMT_MEDIUM;
- #endif
+ SYSCALL_KVMTEST
SYSCALL_PSERIES_1
SYSCALL_PSERIES_2_RFID
SYSCALL_PSERIES_3
-EXC_REAL_END(system_call, 0xc00, 0xd00)
+EXC_REAL_END(system_call, 0xc00, 0x100)
-EXC_VIRT_BEGIN(system_call, 0x4c00, 0x4d00)
+EXC_VIRT_BEGIN(system_call, 0x4c00, 0x100)
- HMT_MEDIUM
+ SYSCALL_KVMTEST
SYSCALL_PSERIES_1
SYSCALL_PSERIES_2_DIRECT
SYSCALL_PSERIES_3
@@@ -926,8 -929,8 +929,8 @@@ EXC_VIRT(single_step, 0x4d00, 0x100, 0x
TRAMP_KVM(PACA_EXGEN, 0xd00)
EXC_COMMON(single_step_common, 0xd00, single_step_exception)
-EXC_REAL_OOL_HV(h_data_storage, 0xe00, 0xe20)
-EXC_VIRT_OOL_HV(h_data_storage, 0x4e00, 0x4e20, 0xe00)
+EXC_REAL_OOL_HV(h_data_storage, 0xe00, 0x20)
- EXC_VIRT_NONE(0x4e00, 0x20)
++EXC_VIRT_OOL_HV(h_data_storage, 0x4e00, 0x20, 0xe00)
TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0xe00)
EXC_COMMON_BEGIN(h_data_storage_common)
mfspr r10,SPRN_HDAR
@@@ -942,8 -945,8 +945,8 @@@
b ret_from_except
-EXC_REAL_OOL_HV(h_instr_storage, 0xe20, 0xe40)
-EXC_VIRT_OOL_HV(h_instr_storage, 0x4e20, 0x4e40, 0xe20)
+EXC_REAL_OOL_HV(h_instr_storage, 0xe20, 0x20)
- EXC_VIRT_NONE(0x4e20, 0x20)
++EXC_VIRT_OOL_HV(h_instr_storage, 0x4e20, 0x20, 0xe20)
TRAMP_KVM_HV(PACA_EXGEN, 0xe20)
EXC_COMMON(h_instr_storage_common, 0xe20, unknown_exception)
