These patches resolve the irq0->inti2 override issue, and get the hpet working
on kvm.
They are dependent on Jes Sorensen's recent 0006-qemu-kvm-irq-routing.patch.
Override and HPET changes are sent as a series because HPET depends on the
override. Win2k8 expects the HPET interrupt on inti2, regardless of whether
an override exists in the BIOS. And the HPET spec states that in legacy mode,
timer interrupt is on inti2.
The irq0->inti2 override will always be used unless the kernel cannot do irq
routing (i.e., compatibility with old kernels). So if the kernel is capable,
userspace sets up irq0->inti2 via the irq routing interface, and adds the
irq0->inti2 override to the MADT interrupt source override table,
and the mp table (for the no-acpi case).
A couple of months ago, Marcelo was seeing RHEL5 guests complain of invalid
checksum with these patches, but later he couldn't reproduce it, and I'm not
seeing it now. While all guests still need to be fully tested, everything
appears to be in order. I've tested on win2k864, win2k832, RHEL5.3 32 bit,
and ubuntu 8.10 64 bit.
Signed-off-by: Beth Kon <eak@xxxxxxxxxx>
diff --git a/kvm/bios/rombios32.c b/kvm/bios/rombios32.c
index 8684987..07dda73 100755
--- a/kvm/bios/rombios32.c
+++ b/kvm/bios/rombios32.c
@@ -445,6 +445,9 @@ uint32_t cpuid_ext_features;
unsigned long ram_size;
uint64_t ram_end;
uint8_t bios_uuid[16];
+#ifdef BX_QEMU
+uint8_t irq0_override;
+#endif
#ifdef BX_USE_EBDA_TABLES
unsigned long ebda_cur_addr;
#endif
@@ -477,6 +480,7 @@ void wrmsr_smp(uint32_t index, uint64_t val)
#define QEMU_CFG_SIGNATURE 0x00
#define QEMU_CFG_ID 0x01
#define QEMU_CFG_UUID 0x02
+#define QEMU_CFG_IRQ0_OVERRIDE 0x0e
int qemu_cfg_port;
@@ -518,6 +522,18 @@ void uuid_probe(void)
memset(bios_uuid, 0, 16);
}
+#ifdef BX_QEMU
+void irq0_override_probe(void)
+{
+ if(qemu_cfg_port) {
+ qemu_cfg_select(QEMU_CFG_IRQ0_OVERRIDE);
+ qemu_cfg_read(&irq0_override, 1);
+ return;
+ }
+ memset(&irq0_override, 0, 1);
+}
+#endif
+
void cpu_probe(void)
{
uint32_t eax, ebx, ecx, edx;
@@ -1160,6 +1176,13 @@ static void mptable_init(void)
/* irqs */
for(i = 0; i < 16; i++) {
+#ifdef BX_QEMU
+ /* One entry per ioapic interrupt destination. Destination 2 is covered
+ * by irq0->inti2 override (i == 0). Source IRQ 2 is unused
+ */
+ if (irq0_override && i == 2)
+ continue;
+#endif
putb(&q, 3); /* entry type = I/O interrupt */
putb(&q, 0); /* interrupt type = vectored interrupt */
putb(&q, 0); /* flags: po=0, el=0 */
@@ -1167,7 +1190,12 @@ static void mptable_init(void)
putb(&q, 0); /* source bus ID = ISA */
putb(&q, i); /* source bus IRQ */
putb(&q, ioapic_id); /* dest I/O APIC ID */
- putb(&q, i); /* dest I/O APIC interrupt in */
+#ifdef BX_QEMU
+ if (irq0_override && i == 0)
+ putb(&q, 2); /* dest I/O APIC interrupt in */
+ else
+#endif
+ putb(&q, i); /* dest I/O APIC interrupt in */
}
/* patch length */
len = q - mp_config_table;
@@ -1550,16 +1578,18 @@ void acpi_bios_init(void)
addr = (addr + 7) & ~7;
madt_addr = addr;
+ madt = (void *)(addr);
madt_size = sizeof(*madt) +
sizeof(struct madt_processor_apic) * MAX_CPUS +
-#ifdef BX_QEMU
- sizeof(struct madt_io_apic) /* + sizeof(struct madt_int_override) */;
-#else
sizeof(struct madt_io_apic);
+#ifdef BX_QEMU
+ for (i = 0; i < 16; i++)
+ if (PCI_ISA_IRQ_MASK & (1U << i))
+ madt_size += sizeof(struct madt_int_override);
+ if (irq0_override)
+ madt_size += sizeof(struct madt_int_override);
#endif
- madt = (void *)(addr);
addr += madt_size;
-
#ifdef BX_QEMU
#ifdef HPET_WORKS_IN_KVM
addr = (addr + 7) & ~7;
@@ -1660,23 +1690,20 @@ void acpi_bios_init(void)
io_apic->io_apic_id = smp_cpus;
io_apic->address = cpu_to_le32(0xfec00000);
io_apic->interrupt = cpu_to_le32(0);
+ int_override = (struct madt_int_override*)(io_apic + 1);
#ifdef BX_QEMU
-#ifdef HPET_WORKS_IN_KVM
- io_apic++;
-
- int_override = (void *)io_apic;
- int_override->type = APIC_XRUPT_OVERRIDE;
- int_override->length = sizeof(*int_override);
- int_override->bus = cpu_to_le32(0);
- int_override->source = cpu_to_le32(0);
- int_override->gsi = cpu_to_le32(2);
- int_override->flags = cpu_to_le32(0);
-#endif
+ if (irq0_override) {
+ memset(int_override, 0, sizeof(*int_override));
+ int_override->type = APIC_XRUPT_OVERRIDE;
+ int_override->length = sizeof(*int_override);
+ int_override->source = 0;
+ int_override->gsi = 2;
+ int_override->flags = 0; /* conforms to bus specifications */
+ int_override++;
+ }
#endif
-
- int_override = (struct madt_int_override*)(io_apic + 1);
for ( i = 0; i < 16; i++ ) {
- if ( PCI_ISA_IRQ_MASK & (1U << i) ) {
+ if (PCI_ISA_IRQ_MASK & (1U << i)) {
memset(int_override, 0, sizeof(*int_override));
int_override->type = APIC_XRUPT_OVERRIDE;
int_override->length = sizeof(*int_override);
@@ -1688,7 +1715,6 @@ void acpi_bios_init(void)
continue;
}
int_override++;
- madt_size += sizeof(struct madt_int_override);
}
acpi_build_table_header((struct acpi_table_header *)madt,
"APIC", madt_size, 1);
@@ -2325,6 +2351,9 @@ void rombios32_init(uint32_t *s3_resume_vector, uint8_t *shutdown_flag)
if (bios_table_cur_addr != 0) {
+#ifdef BX_QEMU
+ irq0_override_probe();
+#endif
mptable_init();
uuid_probe();
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
