Bugs item #2506814, was opened at 2009-01-14 11:38 Message generated for change (Comment added) made by mellen You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2506814&group_id=180599 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: Fabio Coatti (cova) Assigned to: Nobody/Anonymous (nobody) Summary: TAP network lockup after some traffic Initial Comment: Hi all, we are experiencing severe network troubles using kvm+tap networking. basically, after some network load (we have yet to identify the exact amount of traffic if one exist) network stops working. During lockups, With tcpdump we can see arp requests on guest interface, then on tap, brX and physical interfaces on host system. the arp answers can be seen, with tcpdump, only on physical host interface and bridge (brX), but not on tap device. Basically it seems that packets coming from external network get lost in tap device on the way to guest (kvm). Looking at tap data with ifconfig, the only weird thing is the TX packets overrun count that is > 0. every time the network stops working, overrun count increases. This has been observed with several kvm releases (for sure, 76/77/78/79/80/81/82) and with different kernels (tried with some versions among 2.6.25.X, 26.X, 27.X, 28) both on guest and host side. we tried several network drivers (virtio, e1000, rtl) and all shows the same problem. Only 100Mbit drivers seems to be unaffected so far. (only virtio has acceptable performance) (btw: on host machine we have vlan on top of ethX devices) cpu number on guest makes no difference. we tried with vanilla kernel provided kvm modules and with kvm package provided modules. guest: 32 bit host: 64 bit host machine: 2 x Quad-Core AMD Opteron(tm) Processor 2352 16GB, gentoo. Of course I can provide more details or perform other tests and try patches, if someone can give me some hints and advices they will be most welcome. Thanks. ---------------------------------------------------------------------- Comment By: Tais M. Hansen (mellen) Date: 2009-05-07 10:39 Message: Just happened again. Seems like it stops generating interrupts on virtio devices: 10: 3001 51199 IO-APIC-fasteoi virtio1, virtio2 11: 7694835 8468134 IO-APIC-fasteoi virtio0 doing an /bin/ls froze the guest for a minute or so until a CTRL-C got through. After /bin/ls: 10: 3001 51220 IO-APIC-fasteoi virtio1, virtio2 11: 7694835 8468134 IO-APIC-fasteoi virtio0 kvm_stat: efer_reload 0 0 exits 19150288617 1082 fpu_reload 119767301 34 halt_exits 544721221 194 halt_wakeup 300187634 141 host_state_reload 837279034 259 hypercalls 4991133618 0 insn_emulation 4797940911 709 insn_emulation_fail 0 0 invlpg 0 0 io_exits 281254462 65 irq_exits 173205458 0 irq_window 0 0 largepages 0 0 mmio_exits 720457 0 mmu_cache_miss 290275800 0 mmu_flooded 289036380 0 mmu_pde_zapped 170308104 0 mmu_pte_updated 6239297430 0 mmu_pte_write 20470585377 0 mmu_recycled 0 0 mmu_shadow_zapped 335324686 0 pf_fixed 8324827214 0 pf_guest 2229555421 0 remote_tlb_flush 283772247 0 request_irq 0 0 signal_exits 6 0 tlb_flush 5334530556 66 ... but there are 6 other guests on this host running just fine. Can't connect gdb to the kvm's gdbserver. It just says "Remote 'g' packet reply is too long: ...." Issuing system_reset stalled for a minute, then rebooted the guest. After reboot, guest is find again. ---------------------------------------------------------------------- Comment By: Tais M. Hansen (mellen) Date: 2009-05-06 17:07 Message: I'm curious about the status of this issue? I'm experiencing the same problem apparently randomly on guests. Restarting the network interface does not seem to fix the problem. Only a reboot (or system_reset in kvm/qemu console) solves it. Last time it happened was on a host with kvm-84 and guest with kernel 2.6.27 using virtio-net. Leading up to the stall it had a traffic load of about 5 mbit constantly up and down for just over 2 hours with one 12 mbit spikes. I did not check interface counters or network traces at the time. ---------------------------------------------------------------------- Comment By: Fabio Coatti (cova) Date: 2009-01-14 14:24 Message: It seems quite similar indeed, but ip link set eth up/down on guest side seems to have no effect. Besides that, looking at the thread you pointed me, I can see another difference: sniffing on tap device in my case shows only outgoing packets (i.e. leaving kvm guest). So it can be the very same issue, but some differences are present. At least, we are seeing this on newer kernels and kvm revisions :) ---------------------------------------------------------------------- Comment By: Mark McLoughlin (markmc) Date: 2009-01-14 12:19 Message: Does ifup/ifdown in the guest fix the hang? If so, it sounds like the issue discussed in this long thread: http://www.mail-archive.com/kvm@xxxxxxxxxxxxxxx/msg06774.html We still haven't got to the bottom of it. ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=893831&aid=2506814&group_id=180599 -- To unsubscribe from this list: send the line "unsubscribe kvm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
