Re: [Qemu-devel] [kvm-unit-tests PATCH 3/4] arm/arm64: GICv2: add GICD_ITARGETSR testing

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andre,

On 23/11/2016 14:24, Auger Eric wrote:
> Hi,
> 
> On 18/11/2016 15:20, Andrew Jones wrote:
>> On Thu, Nov 17, 2016 at 05:57:51PM +0000, Andre Przywara wrote:
>>> Some tests for the ITARGETS registers.
>>> Bits corresponding to non-existent CPUs must be RAZ/WI.
>>> These registers must be byte-accessible, also check that accesses beyond
>>> the implemented IRQ limit are actually read-as-zero/write-ignore.
>>>
>>> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
>>> ---
>>>  arm/gic.c         | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
>>>  lib/arm/asm/gic.h |  1 +
>>>  2 files changed, 55 insertions(+)
>>>
>>> diff --git a/arm/gic.c b/arm/gic.c
>>> index a27da2c..02b1be1 100644
>>> --- a/arm/gic.c
>>> +++ b/arm/gic.c
>>> @@ -397,6 +397,57 @@ static bool test_priorities(int nr_irqs, void *priptr)
>>>  	return true;
>>>  }
>>>  
>>> +static bool test_targets(int nr_irqs)
>>> +{
>>> +	void *targetsptr = gicv2_dist_base() + GICD_ITARGETSR;
>>> +	u32 orig_targets;
>>> +	u32 cpu_mask;
>>> +	u32 pattern, reg;
>>> +
>>> +	orig_targets = readl(targetsptr + 32);
>>> +	report_prefix_push("ITARGETSR");
>>> +
>>> +	cpu_mask = (1 << nr_cpus) - 1;
>>
>> Shouldn't this be 1 << (nr_cpus - 1) ?
> original looks correct to me.
>>
>> Is this test always going to be gicv2-only? We should probably comment it,
>> if so. We don't want to risk this being run when nr_cpus can be larger
>> than 8.
>>
>>> +	cpu_mask |= cpu_mask << 8;
>>> +	cpu_mask |= cpu_mask << 16;
> Don't we miss the 4th byte mask?
> 
> Thanks
> 
> Eric
>>> +
>>> +	/* Check that bits for non implemented CPUs are RAZ/WI. */
>>> +	if (nr_cpus < 8) {
>>> +		writel(0xffffffff, targetsptr + 32);
>>> +		report("bits for %d non-existent CPUs masked",
>>> +		       !(readl(targetsptr + 32) & ~cpu_mask), 8 - nr_cpus);

yep on AMD overdrive with smp=4 I get:

FAIL: gicv2: mmio: ITARGETSR: bits for 4 non-existent CPUs masked

Thanks

Eric

>>> +	} else {
>>> +		report_skip("CPU masking (all CPUs implemented)");
>>> +	}
>>> +
>>> +	report("accesses beyond limit RAZ/WI",
>>> +	       test_readonly_32(targetsptr + nr_irqs, true));
>>> +
>>> +	pattern = 0x0103020f;
>>> +	writel(pattern, targetsptr + 32);
>>> +	reg = readl(targetsptr + 32);
>>> +	report("register content preserved (%08x => %08x)",
>>> +	       reg == (pattern & cpu_mask), pattern & cpu_mask, reg);
>>> +
>>> +	/*
>>> +	 * The TARGETS registers are byte accessible, do a byte-wide
>>> +	 * read and write of known content to check for this.
>>> +	 */
>>> +	reg = readb(targetsptr + 33);
>>> +	report("byte reads successful (0x%08x => 0x%02x)",
>>> +	       reg == (BYTE(pattern, 1) & cpu_mask),
>>> +	       pattern & cpu_mask, reg);
>>> +
>>> +	pattern = REPLACE_BYTE(pattern, 2, 0x04);
>>> +	writeb(BYTE(pattern, 2), targetsptr + 34);
>>> +	reg = readl(targetsptr + 32);
>>> +	report("byte writes successful (0x%02x => 0x%08x)",
>>> +	       reg == (pattern & cpu_mask), BYTE(pattern, 2), reg);
>>
>> Last patch also had a byte addressability test. Maybe we should make
>> a helper function?
>>
>>> +
>>> +	writel(orig_targets, targetsptr + 32);
>>> +	return true;
>>
>> Function can/should be void.
>>
>>> +}
>>> +
>>>  static int gic_test_mmio(int gic_version)
>>>  {
>>>  	u32 reg;
>>> @@ -436,6 +487,9 @@ static int gic_test_mmio(int gic_version)
>>>  
>>>  	test_priorities(nr_irqs, gic_dist_base + GICD_IPRIORITYR);
>>>  
>>> +	if (gic_version == 2)
>>> +		test_targets(nr_irqs);
>>> +
>>>  	return 0;
>>>  }
>>>  
>>> diff --git a/lib/arm/asm/gic.h b/lib/arm/asm/gic.h
>>> index cef748d..6f170cb 100644
>>> --- a/lib/arm/asm/gic.h
>>> +++ b/lib/arm/asm/gic.h
>>> @@ -14,6 +14,7 @@
>>>  #define GICD_IGROUPR			0x0080
>>>  #define GICD_ISENABLER			0x0100
>>>  #define GICD_IPRIORITYR			0x0400
>>> +#define GICD_ITARGETSR			0x0800
>>>  #define GICD_SGIR			0x0f00
>>>  #define GICD_ICPIDR2			0x0fe8
>>>  
>>> -- 
>>> 2.9.0
>>>
>>>
>>
>> Thanks,
>> drew
>>
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [KVM ARM]     [KVM ia64]     [KVM ppc]     [Virtualization Tools]     [Spice Development]     [Libvirt]     [Libvirt Users]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Questions]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux