On Tue, Nov 08, 2016 at 12:17:15PM -0600, Wei Huang wrote:
> From: Christopher Covington <cov@xxxxxxxxxxxxxx>
>
> Calculate the numbers of cycles per instruction (CPI) implied by ARM
> PMU cycle counter values. The code includes a strict checking facility
> intended for the -icount option in TCG mode in the configuration file.
>
> Signed-off-by: Christopher Covington <cov@xxxxxxxxxxxxxx>
> Signed-off-by: Wei Huang <wei@xxxxxxxxxx>
> ---
> arm/pmu.c | 101 +++++++++++++++++++++++++++++++++++++++++++++++++++++-
> arm/unittests.cfg | 14 ++++++++
> 2 files changed, 114 insertions(+), 1 deletion(-)
>
> diff --git a/arm/pmu.c b/arm/pmu.c
> index d5e3ac3..09aff89 100644
> --- a/arm/pmu.c
> +++ b/arm/pmu.c
> @@ -15,6 +15,7 @@
> #include "libcflat.h"
>
> #define PMU_PMCR_E (1 << 0)
> +#define PMU_PMCR_C (1 << 2)
> #define PMU_PMCR_N_SHIFT 11
> #define PMU_PMCR_N_MASK 0x1f
> #define PMU_PMCR_ID_SHIFT 16
> @@ -75,6 +76,23 @@ static inline void pmccfiltr_write(uint32_t value)
> pmselr_write(PMU_CYCLE_IDX);
> pmxevtyper_write(value);
> }
> +
> +/*
> + * Extra instructions inserted by the compiler would be difficult to compensate
> + * for, so hand assemble everything between, and including, the PMCR accesses
> + * to start and stop counting.
> + */
> +static inline void loop(int i, uint32_t pmcr)
> +{
> + asm volatile(
> + " mcr p15, 0, %[pmcr], c9, c12, 0\n"
isb
> + "1: subs %[i], %[i], #1\n"
> + " bgt 1b\n"
> + " mcr p15, 0, %[z], c9, c12, 0\n"
isb
> + : [i] "+r" (i)
> + : [pmcr] "r" (pmcr), [z] "r" (0)
> + : "cc");
> +}
> #elif defined(__aarch64__)
> static inline uint32_t pmcr_read(void)
> {
> @@ -106,6 +124,23 @@ static inline void pmccfiltr_write(uint32_t value)
> {
> asm volatile("msr pmccfiltr_el0, %0" : : "r" (value));
> }
> +
> +/*
> + * Extra instructions inserted by the compiler would be difficult to compensate
> + * for, so hand assemble everything between, and including, the PMCR accesses
> + * to start and stop counting.
> + */
> +static inline void loop(int i, uint32_t pmcr)
> +{
> + asm volatile(
> + " msr pmcr_el0, %[pmcr]\n"
isb
> + "1: subs %[i], %[i], #1\n"
> + " b.gt 1b\n"
> + " msr pmcr_el0, xzr\n"
isb
> + : [i] "+r" (i)
> + : [pmcr] "r" (pmcr)
> + : "cc");
> +}
> #endif
>
> /*
> @@ -156,8 +191,71 @@ static bool check_cycles_increase(void)
> return true;
> }
>
> -int main(void)
> +/*
> + * Execute a known number of guest instructions. Only odd instruction counts
> + * greater than or equal to 3 are supported by the in-line assembly code. The
> + * control register (PMCR_EL0) is initialized with the provided value (allowing
> + * for example for the cycle counter or event counters to be reset). At the end
> + * of the exact instruction loop, zero is written to PMCR_EL0 to disable
> + * counting, allowing the cycle counter or event counters to be read at the
> + * leisure of the calling code.
> + */
> +static void measure_instrs(int num, uint32_t pmcr)
> +{
> + int i = (num - 1) / 2;
> +
> + assert(num >= 3 && ((num - 1) % 2 == 0));
> + loop(i, pmcr);
> +}
> +
> +/*
> + * Measure cycle counts for various known instruction counts. Ensure that the
> + * cycle counter progresses (similar to check_cycles_increase() but with more
> + * instructions and using reset and stop controls). If supplied a positive,
> + * nonzero CPI parameter, also strictly check that every measurement matches
> + * it. Strict CPI checking is used to test -icount mode.
> + */
> +static bool check_cpi(int cpi)
> +{
> + uint32_t pmcr = pmcr_read() | PMU_PMCR_C | PMU_PMCR_E;
> +
> + if (cpi > 0)
> + printf("Checking for CPI=%d.\n", cpi);
> + printf("instrs : cycles0 cycles1 ...\n");
> +
> + for (int i = 3; i < 300; i += 32) {
> + int avg, sum = 0;
> +
> + printf("%d :", i);
> + for (int j = 0; j < NR_SAMPLES; j++) {
> + int cycles;
> +
> + measure_instrs(i, pmcr);
> + cycles =pmccntr_read();
> + printf(" %d", cycles);
> +
> + if (!cycles || (cpi > 0 && cycles != i * cpi)) {
> + printf("\n");
> + return false;
> + }
> +
> + sum += cycles;
> + }
> + avg = sum / NR_SAMPLES;
> + printf(" sum=%d avg=%d avg_ipc=%d avg_cpi=%d\n",
> + sum, avg, i / avg, avg / i);
> + }
> +
> + return true;
> +}
> +
> +int main(int argc, char *argv[])
> {
> + int cpi = 0;
> +
> + if (argc >= 1)
> + cpi = atol(argv[0]);
> +
> report_prefix_push("pmu");
>
> /* init for PMU event access, right now only care about cycle count */
> @@ -166,6 +264,7 @@ int main(void)
>
> report("Control register", check_pmcr());
> report("Monotonically increasing cycle count", check_cycles_increase());
> + report("Cycle/instruction ratio", check_cpi(cpi));
>
> return report_summary();
> }
> diff --git a/arm/unittests.cfg b/arm/unittests.cfg
> index 7645180..2050dc8 100644
> --- a/arm/unittests.cfg
> +++ b/arm/unittests.cfg
> @@ -59,3 +59,17 @@ groups = selftest
> [pmu]
> file = pmu.flat
> groups = pmu
> +
> +# Test PMU support (TCG) with -icount IPC=1
> +[pmu-tcg-icount-1]
> +file = pmu.flat
> +extra_params = -icount 0 -append '1'
> +groups = pmu
> +accel = tcg
> +
> +# Test PMU support (TCG) with -icount IPC=256
> +[pmu-tcg-icount-256]
> +file = pmu.flat
> +extra_params = -icount 8 -append '256'
> +groups = pmu
> +accel = tcg
> --
> 1.8.3.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
